166 research outputs found
Mechanochemical synthesis of nanocrystalline lead selenide
Mechanochemical synthesis of lead selenide PbSe nanoparticles has been performed by high-energy milling of lead and selenium powder in a planetary ball mill Pulverisette 6 (Fritsch, Germany) and in an industrial eccentric vibratory mill ESM 654 (Siebtechnik GmbH, Germany). Structural properties of the synthesized lead selenide were characterized by X-ray diffraction, which confirms crystalline nature of PbSe nanoparticles (JCPDS 6-354). The average size of PbSe crystallites of 37 nm was calculated from XRD data by Williamson-Hall method. The methods of particle size distribution analysis, specific surface area measurement, scanning electron microscopy and transmission electron microscopy were used for characterization of surface, mean particle size, and morphology of PbSe. An application of industrial mill verified a possibility of the synthesis of a narrowband-gap semiconductor PbSe at ambient temperature and in a relatively short reaction time
Današnje stanje međulonca s pokrivnim troskama u ljevaonici slabova
Tundish metallurgy development, which has been focused on steel cleanliness improvement in last few years, affected also tundish slag systems. Molten slags are the most suitable for both absorbing and refining functions of tundish cover slags, while a system of extremely low density does satisfy their isolating functions in the best way. Hence it is obvious, that it is not possible to assure the main functions using one sort of tundish covering slags. In addition, traditional acid slags, are being replaced with basic covering slags, or combination of both types. In this work, we have tried to investigate the operation of tundish covering slag under the condition of slab continuous casting. A genesis of covering slag from applied cover powders its refining functions have been investigated, as well as the changes of covering slag chemical composition during one tundish casting sequence.Razvoj metalurgije međulonca koji se usmjerio na unapređivanje čistoće čelika tijekom zadnjih nekoliko godina odrazio se i na vrste troske u međuloncu. Rastaljena troska je najpogodnija kako za funkcije apsorbiranja tako i za funkcije rafiniranja pokrovne troske međulonca sve dok sistem krajnje male gustoće zadovoljava na najbolji način njene izolacione funkcije. Iz toga je jasno, da nije moguće osigurati glavne funkcije uporabom samo jedne vrste pokrovnih troski međulonca. Osim toga, tradicionalne kisele troske zamjenjuju se bazičnim pokrovnim troskama, ili se koristi kombinacija obadva tipa. U ovom članku se nastojalo istražiti rad pokrovne troske međulonca u uvjetima kontinuiranog lijevanja slabova. Istraživano je kako se uporaba pokrovne troske razvijala iz uporabe pokrovnih prahova te njene funkcije rafiniranja kao i promjene njenog kemijskog sastava tijekom jednog ciklusa lijevanja međulonca
Nanogranular MgB2 thin films on SiC buffered Si substrates prepared by in-situ method
MgB2 thin films were deposited on SiC buffered Si substrates by sequential
electron beam evaporation of B-Mg bilayer followed by in-situ annealing. The
application of a SiC buffer layer enables the maximum annealing temperature of
830 C. The Transmission Electron Microscopy analysis confirms the growth of a
nanogranular MgB2 film and the presence of a Mg2Si compound at the surface of
the film. The 150-200 nm thick films show a maximum zero resistance critical
temperature TC0 above 37 K and a critical current density JC ~ 106 A/cm2 at
11K.Comment: 7 pages, 6 figures, submitted to Applied Physics Letter
Study of the MgB2 grain size role in ex-situ multifilamentary wires with thin filaments
The MgB2 superconductor has already demonstrated its applicative potential,
in particular for DC applications such as MRI magnets, thanks to the low costs
of the raw materials and to its simple production process. However further
efforts have still to be made in order to broaden its employment also towards
the AC applications such as SFCL, motors, transformers. The main issues are
related to the reduction of the AC losses. Some of these can be faced by
obtaining multifilamentary conductors with a large number of very fine
filaments and, in this context, the powders granulometry can play a crucial
role. We have prepared MgB2 starting powders with different granulometries and
by the ex-situ P.I.T method we have realized multifilamentary wires with a
number of filaments up to 361 and an average size of each filament lowered down
to 30 microns. In particular we have studied the relationship between grain and
filament size in terms of transport properties and show that the optimization
of this ratio is possible in order to obtain suitable conductors for AC
industrial applications
AC loss in ReBCO pancake coils and stacks of them: modelling and measurement
Many applications of ReBCO coated conductors contain stacks of pancake coils.
In order to reduce their high AC loss, it is necessary to understand the loss
mechanisms. In this article, we measure and simulate the AC loss and the
critical current, I_c, in stacks of pancake coils ("pancakes"). We construct
stacks of up to 4 pancakes and we measure them by electrical means. We also
obtain the anisotropic field dependence of J_c from I_c measurements of the
tape. This J_c is the only input to the simulations, together with the coil
dimensions. After validating our computations with the measurements, we
simulate stacks of many pancakes, up to 32. We found that the AC loss in a
stack of (four) pancakes is very high, two orders of magnitude larger than for
a single tape. A double pancake behaves as a single one with double width but a
stack of more pancakes is very different. Finally, we found that a 2-strand
Roebel cable reduces the AC loss in a stack of pancakes but not in a single
pancake. In conclusion, the AC loss in stacks of pancakes is too high. However,
our simulations are useful to predict the AC loss and optimise the coil design,
reducing the AC loss.Comment: 34 pages, 18 figures. All figures are modified; figures 3, 7 and 10
are new. Text thoroughly revised and extende
Recommended from our members
Immunogenicity of a Killed Bivalent (O1 and O139) Whole Cell Oral Cholera Vaccine, Shanchol, in Haiti
Background: Studies of the immunogenicity of the killed bivalent whole cell oral cholera vaccine, Shanchol, have been performed in historically cholera-endemic areas of Asia. There is a need to assess the immunogenicity of the vaccine in Haiti and other populations without historical exposure to Vibrio cholerae. Methodology/Principal Findings We measured immune responses after administration of Shanchol, in 25 adults, 51 older children (6–17 years), and 47 younger children (1–5 years) in Haiti, where cholera was introduced in 2010. A≥4-fold increase in vibriocidal antibody titer against V. cholerae O1 Ogawa was observed in 91% of adults, 74% of older children, and 73% of younger children after two doses of Shanchol; similar responses were observed against the Inaba serotype. A≥2-fold increase in serum O-antigen specific polysaccharide IgA antibody levels against V. cholerae O1 Ogawa was observed in 59% of adults, 45% of older children, and 61% of younger children; similar responses were observed against the Inaba serotype. We compared immune responses in Haitian individuals with age- and blood group-matched individuals from Bangladesh, a historically cholera-endemic area. The geometric mean vibriocidal titers after the first dose of vaccine were lower in Haitian than in Bangladeshi vaccinees. However, the mean vibriocidal titers did not differ between the two groups after the second dose of the vaccine. Conclusions/Significance: A killed bivalent whole cell oral cholera vaccine, Shanchol, is highly immunogenic in Haitian adults and children. A two-dose regimen may be important in Haiti, and other populations lacking previous repeated exposures to V. cholerae
Characterization of the LM5 pectic galactan epitope with synthetic analogues of β-1,4-d-galactotetraose
Plant cell wall glycans are important polymers that are crucial to plant development and serve as an important source of sustainable biomass. The study of polysaccharides in the plant cell wall relies heavily on monoclonal antibodies for localization and visualization of glycans, using e.g. Immunofluorescent microscopy. Here, we describe the detailed epitope mapping of the mab LM5 that is shown to bind to a minimum of three sugar residues at the non-reducing end of linear beta-1,4-linked galactan. The study uses de novo synthetic analogs of galactans combined with carbohydrate microarray and competitive inhibition ELISA for analysis of antibody-carbohydrate interactions
Evidence of relationship between strain and In-incorporation:Growth of N-polar In-rich InAlN buffer layer by OMCVD
International audienc
Synthesis of fluorosugar reagents for the construction of well-defined fluoroglycoproteins.
2-Deoxy-2-fluoroglycosyl iodides are privileged glycosyl donors for the stereoselective preparation of 1-Nu-β-fluorosugars, which are useful reagents for chemical site-selective protein glycosylation. Ready access to such β-fluorosugars enables the mild and efficient construction of well-defined fluoroglycoproteins.We thank the European Commission (Marie Curie CIG, O.B. and G.J.L.B.), MICINN, Spain (Juan de la Cierva Fellowship, O.B.), MINECO, Spain (CTQ2011-22872BQU) and Generalitat de Catalunya (M.S.) for generous financial support. We also thank Mr. Adrià Cardona-Benages (URV) for technical assis-tance. G.J.L.B. thanks the Royal Society (University Research Fellowship), Fundação para a Ciência a Tecnologia, Portugal (FCT Investigator), and the EPSRC for funding.This is the final version of the article. It first appeared from ACS via http://pubs.acs.org/doi/abs/10.1021/acs.orglett.5b01259
- …