First-principles calculations of exchange interactions, spin waves, and temperature dependence of magnetization in inverse-Heusler-based spin gapless semiconductors

Employing first principles electronic structure calculations in conjunction with the frozen-magnon method we calculate exchange interactions, spin-wave dispersion, and spin-wave stiffness constants in inverse-Heusler-based spin gapless semiconductor (SGS) compounds Mn$_2$CoAl, Ti$_2$MnAl, Cr$_2$ZnSi, Ti$_2$CoSi and Ti$_2$VAs. We find that their magnetic behavior is similar to the half-metallic ferromagnetic full-Heusler alloys, i.e., the intersublattice exchange interactions play an essential role in the formation of the magnetic ground state and in determining the Curie temperature, $T_\mathrm{c}$. All compounds, except Ti$_2$CoSi possess a ferrimagnetic ground state. Due to the finite energy gap in one spin channel, the exchange interactions decay sharply with the distance, and hence magnetism of these SGSs can be described considering only nearest and next-nearest neighbor exchange interactions. The calculated spin-wave dispersion curves are typical for ferrimagnets and ferromagnets. The spin-wave stiffness constants turn out to be larger than those of the elementary 3$d$-ferromagnets. Calculated exchange parameters are used as input to determine the temperature dependence of the magnetization and $T_\mathrm{c}$ of the SGSs. We find that the $T_\mathrm{c}$ of all compounds is much above the room temperature. The calculated magnetization curve for Mn$_2$CoAl as well as the Curie temperature are in very good agreement with available experimental data. The present study is expected to pave the way for a deeper understanding of the magnetic properties of the inverse-Heusler-based SGSs and enhance the interest in these materials for application in spintronic and magnetoelectronic devices.Comment: Accepted for publ;ication in Physical Review

Data adaptive estimation of transversal blood flow velocities

The examination of blood flow inside the body may yield important information about vascular anomalies, such as possible indications of, for example, stenosis. Current medical ultrasound systems suffer from only allowing for measuring the blood flow velocity along the direction of irradiation, posing natural difficulties due to the complex behaviour of blood flow, and due to the natural orientation of most blood vessels. Recently, a transversal modulation scheme was introduced to induce also an oscillation along the transversal direction, thereby allowing for the measurement of also the transversal blood flow. In this paper, we propose a novel data-adaptive blood flow estimator exploiting this modulation scheme. Using realistic Field II simulations, the proposed estimator is shown to achieve a notable performance improvement as compared to current state-of-the-art techniques

Lens magnification by CL0024+1654 in the U and R band

[ABRIDGED] We estimate the total mass distribution of the galaxy cluster CL0024+1654 from the measured source depletion due to lens magnification in the R band. Within a radius of 0.54Mpc/h, a total projected mass of (8.1+/-3.2)*10^14 M_sol/h (EdS) is measured, which corresponds to a mass- to-light ratio of M/L(B)=470+/-180. We compute the luminosity function of CL0024+1654 in order to estimate contamination of the background source counts from cluster galaxies. Three different magnification-based reconstruction methods are employed using both local and non-local techniques. We have modified the standard single power-law slope number count theory to incorporate a break and applied this to our observations. Fitting analytical magnification profiles of different cluster models to the observed number counts, we find that the cluster is best described either by a NFW model with scale radius r_s=334+/-191 kpc/h and normalisation kappa_s=0.23+/-0.08 or a power-law profile with slope xi=0.61+/-0.11, central surface mass density kappa_0=1.52+/-0.20 and assuming a core radius of r_core=35 kpc/h. The NFW model predicts that the cumulative projected mass contained within a radius R scales as M(<R)=2.9*10^14*(R/1')^[1.3-0.5lg (R/1')] M_sol/h. Finally, we have exploited the fact that flux magnification effectively enables us to probe deeper than the physical limiting magnitude of our observations in searching for a change of slope in the U band number counts. We rule out both a total flattening of the counts with a break up to U_AB<=26.6 and a change of slope, reported by some studies, from dlog N/dm=0.4->0.15 up to U_AB<=26.4 with 95% confidence.Comment: 19 pages, 12 figures, submitted to A&A. New version includes more robust U band break analysis and contamination estimates, plus new plot

Tuning the Curie temperature of FeCo compounds by tetragonal distortion

Combining density-functional theory calculations with a classical Monte Carlo method, we show that for B2-type FeCo compounds tetragonal distortion gives rise to a strong reduction of the Curie temperature $T_{\mathrm{C}}$. The $T_{\mathrm{C}}$ monotonically decreases from 1575 K (for $c/a=1$) to 940 K (for c/a=\sqrtwo). We find that the nearest neighbor Fe-Co exchange interaction is sufficient to explain the $c/a$ behavior of the $T_{\mathrm{C}}$. Combination of high magnetocrystalline anisotropy energy with a moderate $T_{\mathrm{C}}$ value suggests tetragonal FeCo grown on the Rh substrate with $c/a=1.24$ to be a promising material for heat-assisted magnetic recording applications.Comment: 4 pages, 2 figure

Estimating Redshifts for Long Gamma-Ray Bursts

We are constructing a program to estimate the redshifts for GRBs from the original Swift light curves and spectra, aiming to get redshifts for the Swift bursts \textit{without} spectroscopic or photometric redshifts. We derive the luminosity indicators from the light curves and spectra of each burst, including the lag time between low and high photon energy light curves, the variability of the light curve, the peak energy of the spectrum, the number of peaks in the light curve, and the minimum rise time of the peaks. These luminosity indicators can each be related directly to the luminosity, and we combine their independent luminosities into one weighted average. Then with our combined luminosity value, the observed burst peak brightness, and the concordance redshift-distance relation, we can derive the redshift for each burst. In this paper, we test the accuracy of our method on 107 bursts with known spectroscopic redshift. The reduced $\chi^2$ of our best redshifts ($z_{best}$) compared with known spectroscopic redshifts ($z_{spec}$) is 0.86, and the average value of $log_{10}(z_{best}/z_{spec})$ is 0.01, with this indicating that our error bars are good and our estimates are not biased. The RMS scatter of $log_{10}(z_{best}/z_{spec})$ is 0.26. For Swift bursts measured over a relatively narrow energy band, the uncertainty in determining the peak energy is one of the main restrictions on our accuracy. Although the accuracy of our $z_{best}$ values are not as good as that of spectroscopic redshifts, it is very useful for demographic studies, as our sample is nearly complete and the redshifts do not have the severe selection effects associated with optical spectroscopy.Comment: The Astrophysical Journal accepte

Luminosity Functions of Gamma-Ray Burst Afterglows

Aims: Use the standard fireball model to create virtual populations of gamma-ray burst afterglows and study their luminosity functions. Methods: We randomly vary the parameters of the standard fireball model to create virtual populations of afterglows. We use the luminosity of each burst at an observer's time of 1 day to create a luminosity function and compare our results with available observational data to assess the internal consistency of the standard fireball model. Results: We show that the luminosity functions can be described by a function similar to a log normal distribution with an exponential cutoff. The function parameters are frequency dependent but not very dependent on the model parameter distributions used to create the virtual populations. Comparison with observations shows that while there is good general agreement with the data, it is difficult to explain simultaneously the X-ray and optical data. Possible reasons for this are discussed and the most likely one is that the standard fireball model is incomplete and that decoupling of the X-ray and optical emission mechanism may be needed.Comment: 5 pages, 4 figures; accepted for publication in A&

The high A_V Quasar Survey: A z=2.027 metal-rich damped Lyman-alpha absorber towards a red quasar at z=3.21

To fully exploit the potential of quasars as probes of cosmic chemical evolution and the internal gas dynamics of galaxies it is important to understand the selection effects behind the quasar samples and in particular if the selection criteria exclude foreground galaxies with certain properties (most importantly a high dust content). Here we present spectroscopic follow-up from the 10.4-m GTC telescope of a dust-reddened quasar, eHAQ0111+0641, from the extended High A_V Quasar (HAQ) survey. We find that the z=3.21 quasar has a foreground Damped Lyman-alpha Absorber (DLA) at z=2.027 along the line of sight. The DLA has very strong metal lines due to a moderately high metallicity (with an inferred lower limit of 25% of the solar metallicity), but a very large gas column density along the line-of-sight in its host galaxy. This discovery is further evidence that there is a dust bias affecting the census of metals, caused by the combined effect of dust obscuration and reddening, in existing samples of z>2 DLAs. The case of eHAQ0111+0641 illustrates that dust bias is not only caused by dust obscuration, but also dust reddening.Comment: 7 pages, 4 figures. Accepted for publication in A&A. A few typos have been correcte