Effects of social network profiles on (E-)recruitment: An international study

The exponential growth of Social Networks offers us manifold opportunities by being part of a large network. We are able to have immediate updates of (international) events and share information. The advantage is paired with risks about potential influences on our (social) life. With everyone being able to submit information, it is likely to be presented in an inappropriate way in public. And this can happen without even noticing, e.g. if a connected friend is publishing the information. In this paper, we present an international study where we asked many students about the awareness of their profiles in Social Networks and if they believe that this could influence their job applications. The study is matched with a survey of human resource manager if and to what extent they use information being visible in Social Networks. The poster visualizes the results for countries like Germany, U.S., Afghanistan, and China, and demonstrates how different the perception of Social Networks still is

Developments in impact damage modeling for laminated composite structures

Damage tolerance is the most critical technical issue for composite fuselage structures studied in the Advanced Technology Composite Aircraft Structures (ATCAS) program. The objective here is to understand both the impact damage resistance and residual strength of the laminated composite fuselage structure. An understanding of the different damage mechanisms which occur during an impact event will support the selection of materials and structural configurations used in different fuselage quadrants and guide the development of analysis tools for predicting the residual strength of impacted laminates. Prediction of the damage state along with the knowledge of post-impact response to applied loads will allow for engineered stacking sequencies and structural configurations; intelligent decisions on repair requirements will also result

Impact damage resistance of composite fuselage structure, part 1

The impact damage resistance of laminated composite transport aircraft fuselage structures was studied experimentally. A statistically based designed experiment was used to examine numerous material, laminate, structural, and extrinsic (e.g., impactor type) variables. The relative importance and quantitative measure of the effect of each variable and variable interactions on responses including impactor dynamic response, visibility, and internal damage state were determined. The study utilized 32 three-stiffener panels, each with a unique combination of material type, material forms, and structural geometry. Two manufacturing techniques, tow placement and tape lamination, were used to build panels representative of potential fuselage crown, keel, and lower side-panel designs. Various combinations of impactor variables representing various foreign-object-impact threats to the aircraft were examined. Impacts performed at different structural locations within each panel (e.g., skin midbay, stiffener attaching flange, etc.) were considered separate parallel experiments. The relationship between input variables, measured damage states, and structural response to this damage are presented including recommendations for materials and impact test methods for fuselage structure

Impact damage resistance of composite fuselage structure, part 2

The strength of laminated composite materials may be significantly reduced by foreign object impact induced damage. An understanding of the damage state is required in order to predict the behavior of structure under operational loads or to optimize the structural configuration. Types of damage typically induced in laminated materials during an impact event include transverse matrix cracking, delamination, and/or fiber breakage. The details of the damage state and its influence on structural behavior depend on the location of the impact. Damage in the skin may act as a soft inclusion or affect panel stability, while damage occurring over a stiffener may include debonding of the stiffener flange from the skin. An experiment to characterize impact damage resistance of fuselage structure as a function of structural configuration and impact threat was performed. A wide range of variables associated with aircraft fuselage structure such as material type and stiffener geometry (termed, intrinsic variables) and variables related to the operating environment such as impactor mass and diameter (termed, extrinsic variables) were studied using a statistically based design-of-experiments technique. The experimental design resulted in thirty-two different 3-stiffener panels. These configured panels were impacted in various locations with a number of impactor configurations, weights, and energies. The results obtained from an examination of impacts in the skin midbay and hail simulation impacts are documented. The current discussion is a continuation of that work with a focus on nondiscrete characterization of the midbay hail simulation impacts and discrete characterization of impact damage for impacts over the stiffener

Developing a model for the prediction of ground motions due to earthquakes in the Groningen gas field

Major efforts are being undertaken to quantify seismic hazard and risk due to production-induced earthquakes in the Groningen gas field as the basis for rational decision-making about mitigation measures. An essential element is a model to estimate surface ground motions expected at any location for each earthquake originating within the gas reservoir. Taking advantage of the excellent geological and geophysical characterisation of the field and a growing database of ground-motion recordings, models have been developed for predicting response spectral accelerations, peak ground velocity and ground-motion durations for a wide range of magnitudes. The models reflect the unique source and travel path characteristics of the Groningen earthquakes, and account for the inevitable uncertainty in extrapolating from the small observed magnitudes to potential larger events. The predictions of ground-motion amplitudes include the effects of nonlinear site response of the relatively soft near-surface deposits throughou t the field

Temperature dependence of electrical properties of electrodeposited Ni-based nanowires

The influence of annealing on the microstructure and the electrical properties of cylindrical nickel-based nanowires has been investigated. Nanowires of nickel of nominally 200 nm diameter and of permalloy (Py) of nominally 70 nm were fabricated by electrochemical deposition into nanoporous templates of polycarbonate and anodic alumina, respectively. Characterization was carried out on as-grown nanowires and nanowires heat treated at 650°C. Transmission electron microscopy and diffraction imaging of as-grown and annealed nanowires showed temperature-correlated grain growth of an initially nano-crystalline structure with ≤8 nm (Ni) and ≤20 nm (Py) grains towards coarser poly-crystallinity with grain sizes up to about 160 nm (Ni) and 70 nm (Py), latter being limited by the nanowire width. The electrical conductivity of individual as-grown and annealed Ni nanowires was measured in situ within a scanning electron microscope environment. At low current densities, the conductivity of annealed nanowires was estimated to have risen by a factor of about two over as-grown nanowires. We attribute this increase, at least in part, to the observed grain growth. The annealed nanowire was subsequently subjected to increasing current densities. Above 120 kA mm -2 the nanowire resistance started to rise. At 450 kA mm -2 the nanowire melted and current flow ceased

Ground-motion networks in the Groningen field: usability and consistency of surface recordings

Several strong-motion networks have been installed in the Groningen gas field in the Netherlands to record ground motions associated with induced earthquakes. There are now more than 450 permanent surface accelerographs plus a mobile array of 450 instruments, which, in addition to many instrumented boreholes, yield a wealth of data. The database of recordings has been of fundamental importance to the development of ground-motion models that form a key element of the seismic hazard and risk estimations for the field. In order to maximise the benefit that can be derived from these recordings, this study evaluates the usability of the recordings from the different networks, in general terms and specifically with regards to the frequency ranges with acceptable signal-to-noise ratios. The study also explores the consistency among the recordings from the different networks, highlighting in particular how a configuration error was identified and resolved. The largest accelerograph network consists of instruments housed in buildings around the field, frequently installed on the lower parts of walls rather than on the floor. A series of experiments were conducted, using additional instruments installed adjacent to these buildings and replicating the installation configuration in full-scale shake table tests, to identify the degree to which structural response contaminated the recordings. The general finding of these efforts was that for PGV and oscillator periods above 0.1 s, the response spectral ordinates from these recordings can be used with confidence

Using Satellite Data To Improve Land Value Estimations In Bolivia

Precise land valuation is necessary for an efficient allocation of resources at the private level, and territorial planning and provision of public good at the government level. This information can be obtained from real data transactions in limited areas where they occurred, leaving the rest of the land valuation depending on precise estimation models. These estimation models may use sold land characteristics to forecast the value of land with similar characteristics, by using existing data (i.e. returns on land, productivity, surface, soil maps, precipitation data, land use constraints by law, etc.). In many low and middle-income countries this data is scarce, limiting the possibility of developing these models. This information gap may be filled using satellite data. This study uses average biomass production estimations based on satellite data as a proxy for fertility. By using biomass production estimates for Bolivia over a period of 6 years, together with administrative land transaction data and geographical maps including precipitation, average temperature, slope, distance to closest road, to closed local and national markets, we are able to significantly improve previous land price models. This improvement allowed us to develop a land price index to inform farmers about current price trends and expected sale price for their own land

Broadband conversion of microwaves into propagating spin waves in patterned magnetic structures

We have used time-resolved scanning Kerr microscopy and micromagnetic simulations to demonstrate that, when driven by the spatially uniform microwave field, the edges of patterned magnetic samples represent both efficient and highly tunable sources of propagating spin waves. The excitation is due to the local enhancement of the resonance frequency induced by the non-uniform dynamic demagnetizing field generated by precessing magnetization aligned with the edges. Our findings represent a crucial step forward in the design of nanoscale spin-wave sources for magnonic architectures and are also highly relevant to the understanding and interpretation of magnetization dynamics driven by spatially uniform magnetic fields in patterned magnetic samples