978 research outputs found

    Climate adaptation of interconnected infrastructures: a framework for supporting governance

    Get PDF
    Infrastructures are critical for human society, but vulnerable to climate change. The current body of research on infrastructure adaptation does not adequately account for the interconnectedness of infrastructures, both internally and with one another. We take a step toward addressing this gap through the introduction of a framework for infrastructure adaptation that conceptualizes infrastructures as complex socio-technical “systems of systems” embedded in a changing natural environment. We demonstrate the use of this framework by structuring potential climate change impacts and identifying adaptation options for a preliminary set of cases—road, electricity and drinking water infrastructures. By helping to clarify the relationships between impacts at different levels, we find that the framework facilitates the identification of key nodes in the web of possible impacts and helps in the identification of particularly nocuous weather conditions. We also explore how the framework may be applied more comprehensively to facilitate adaptation governance. We suggest that it may help to ensure that the mental models of stakeholders and the quantitative models of researchers incorporate the essential aspects of interacting climate and infrastructure systems. Further research is necessary to test the framework in these contexts and to determine when and where its application may be most beneficial.Infrastructure Networks Climate Adaptation and Hotspots. Knowledge for Climate Progra

    The LOFAR LBA Sky Survey II. First data release

    Get PDF
    The Low Frequency Array (LOFAR) is the only existing radio interferometer able to observe at ultra-low frequencies (<100 MHz) with high resolution (<15") and high sensitivity (<1 mJy/beam). To exploit these capabilities, the LOFAR Surveys Key Science Project is using the LOFAR Low Band Antenna (LBA) to carry out a sensitive wide-area survey at 41-66 MHz named the LOFAR LBA Sky Survey (LoLSS). LoLSS is covering the whole northern sky above declination 24 deg with a resolution of 15" and a sensitivity of 1-2 mJy/beam (1 sigma) depending on declination, field properties, and observing conditions. Here we present the first data release. An automated pipeline was used to reduce the 95 fields included in this data release. The data reduction procedures developed for this project have general application and are currently being used to process LOFAR LBA interferometric observations. Compared to the preliminary release, direction-dependent errors have been corrected for during the calibration process. This results in a typical sensitivity of 1.55 mJy/beam at the target resolution of 15". The first data release of the LOFAR LBA Sky Survey covers 650 sqdeg in the HETDEX spring field. The resultant data products released to the community include mosaic images (I and V Stokes) of the region, and a catalogue of 42463 detected sources and related Gaussian components used to describe sources' morphologies. Separate catalogues for 6 in-band frequencies are also released. The first data release of LoLSS shows that, despite the influences of the ionosphere, LOFAR can conduct large-scale surveys in the frequency window 42-66 MHz with unprecedentedly high sensitivity and resolution. The data can be used to derive unique information on the low-frequency spectral properties of many thousands of sources with a wide range of applications in extragalactic and galactic astronomy.Comment: 20 pages, 22 figures, images and catalogues available at https://www.lofar-surveys.org/lolss.htm

    LOFAR Facet Calibration

    Get PDF
    LOFAR, the Low-Frequency Array, is a powerful new radio telescope operating between 10 and 240 MHz. LOFAR allows detailed sensitive high-resolution studies of the low-frequency radio sky. At the same time LOFAR also provides excellent short baseline coverage to map diffuse extended emission. However, producing high-quality deep images is challenging due to the presence of direction-dependent calibration errors, caused by imperfect knowledge of the station beam shapes and the ionosphere. Furthermore, the large data volume and presence of station clock errors present additional difficulties. In this paper we present a new calibration scheme, which we name facet calibration, to obtain deep high-resolution LOFAR High Band Antenna images using the Dutch part of the array. This scheme solves and corrects the direction-dependent errors in a number of facets that cover the observed field of view. Facet calibration provides close to thermal noise limited images for a typical 8 hr observing run at resolution, meeting the specifications of the LOFAR Tier-1 northern survey

    First release of Apertif imaging survey data

    Get PDF
    Context. Apertif is a phased-array feed system for the Westerbork Synthesis Radio Telescope, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program utilizing this upgrade started on 1 July 2019, with the last observations taken on 28 February 2022. The imaging survey component provides radio continuum, polarization, and spectral line data. Aims. Public release of data is critical for maximizing the legacy of a survey. Toward that end, we describe the release of data products from the first year of survey operations, through 30 June 2020. In particular, we focus on defining quality control metrics for the processed data products. Methods. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products and provide flags indicating the quality of those data products. Results. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams (of 7640 considered) are released. The median noise in the continuum images is 41.4 uJy beam(-1), with a slightly lower median noise of 36.9 uJy beam(-1) in the Stokes V polarization image. The median angular resolution is 11.6 \u27\u27/sin delta. The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy beam(-1), corresponding to a 3-sigma H i column density sensitivity of 1.8 x 10(20) atoms cm(-2) over 20 km s(-1) (for a median angular resolution of 24 \u27\u27 x 15 \u27\u27). Line cubes at lower frequency have slightly higher noise values, consistent with the global RFI environment and overall Apertif system performance. We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface and can be queried using a variety of standard tools

    LOFAR, VLA, AND CHANDRA observations of the Toothbrush galaxy cluster

    Get PDF
    We present deep LOFAR observations between 120 and 181 MHz of the "Toothbrush" (RX J0603.3+4214), a cluster that contains one of the brightest radio relic sources known. Our LOFAR observations exploit a new and novel calibration scheme to probe 10 times deeper than any previous study in this relatively unexplored part of the spectrum. The LOFAR observations, when combined with VLA, GMRT, and Chandra X-ray data, provide new information about the nature of cluster merger shocks and their role in re-accelerating relativistic particles. We derive a spectral index of α=0.8±0.1\alpha =-0.8\pm 0.1 at the northern edge of the main radio relic, steepening toward the south to α2\alpha \approx -2. The spectral index of the radio halo is remarkably uniform (α=1.16\alpha =-1.16, with an intrinsic scatter of 0.04\leq 0.04). The observed radio relic spectral index gives a Mach number of M=2.80.3+0.5{ \mathcal M }={2.8}_{-0.3}^{+0.5}, assuming diffusive shock acceleration. However, the gas density jump at the northern edge of the large radio relic implies a much weaker shock (M1.2{ \mathcal M }\approx 1.2, with an upper limit of M1.5{ \mathcal M }\approx 1.5). The discrepancy between the Mach numbers calculated from the radio and X-rays can be explained if either (i) the relic traces a complex shock surface along the line of sight, or (ii) if the radio relic emission is produced by a re-accelerated population of fossil particles from a radio galaxy. Our results highlight the need for additional theoretical work and numerical simulations of particle acceleration and re-acceleration at cluster merger shocks

    VizieR Online Data Catalog: Bootes field LOFAR 150-MHz observations (Williams+, 2016)

    Get PDF
    Here, we report on the first LOFAR Cycle 2 High Band Antenna (HBA) observations of the Bootes field. The Bootes field is one of the Tier-3 Survey fields, and the aim is to eventually survey this field to the extreme rms depth of 12uJy/beam (1σ) at 150MHz. The Bootes field was observed on 2014 August 10 with the LOFAR HBA stations. (2 data files)

    The LOFAR Two-metre Sky Survey V. Second data release

    Get PDF
    In this data release from the ongoing LOw-Frequency ARray (LOFAR) Two-metre Sky Survey we present 120a 168 MHz images covering 27% of the northern sky. Our coverage is split into two regions centred at approximately 12h45m +44 30a and 1h00m +28 00a and spanning 4178 and 1457 square degrees respectively. The images were derived from 3451 h (7.6 PB) of LOFAR High Band Antenna data which were corrected for the direction-independent instrumental properties as well as direction-dependent ionospheric distortions during extensive, but fully automated, data processing. A catalogue of 4 396 228 radio sources is derived from our total intensity (Stokes I) maps, where the majority of these have never been detected at radio wavelengths before. At 6a resolution, our full bandwidth Stokes I continuum maps with a central frequency of 144 MHz have: a median rms sensitivity of 83 μJy beama 1; a flux density scale accuracy of approximately 10%; an astrometric accuracy of 0.2a; and we estimate the point-source completeness to be 90% at a peak brightness of 0.8 mJy beama 1. By creating three 16 MHz bandwidth images across the band we are able to measure the in-band spectral index of many sources, albeit with an error on the derived spectral index of > a ±a 0.2 which is a consequence of our flux-density scale accuracy and small fractional bandwidth. Our circular polarisation (Stokes V) 20a resolution 120a168 MHz continuum images have a median rms sensitivity of 95 μJy beama 1, and we estimate a Stokes I to Stokes V leakage of 0.056%. Our linear polarisation (Stokes Q and Stokes U) image cubes consist of 480a A a 97.6 kHz wide planes and have a median rms sensitivity per plane of 10.8 mJy beama 1 at 4a and 2.2 mJy beama 1 at 20a; we estimate the Stokes I to Stokes Q/U leakage to be approximately 0.2%. Here we characterise and publicly release our Stokes I, Q, U and V images in addition to the calibrated uv-data to facilitate the thorough scientific exploitation of this unique dataset
    corecore