Cartographie AMT du biseau salé sur le flanc sud du Piton de la Fournaise (Ile de la Réunion)

Dans le secteur du Baril, situé sur la planèze sud du volcan de la Fournaise, l'interprétation unidimensionnelle (1-D) de 34 sondages AMT montre une séquence à trois terrains, avec disparition du deuxième dans la zone côtière. Cette séquence comprend un horizon supérieur résistant (> 1000 Ohm.m), un horizon intermédiaire plus conducteur (100 à 600 Ohm.m), et un substratum très conducteur (< 10 Ohm.m). Les résistivités obtenues permettent d'assimiler ce substratum au biseau salé. Les variations importantes dans la topographie du toit du biseau salé apportent des données nouvelles concernant les phénomènes de pénétration saline dans les aquifères volcaniques et, indirectement, une meilleure connaissance de la géométrie et du fonctionnement de l'aquifère sus-jacent. (Résumé d'auteur

POLDER observations of cloud bidirectional reflectances compared to a plane-parallel model using the International Satellite Cloud Climatology Project cloud phase functions

International audienceThis study investigates the validity of the plane-parallel cloud model and in addition the suitability of water droplet and ice polycrystal phase functions for stratocumulus and cirrus clouds, respectively. To do that, we take advantage of the multidirectional viewing capability of the Polarization and Directionality of the Earth's Reflectances (POLDER) instrument which allows us to characterize the anisotropy of the reflected radiation field. We focus on the analysis of airborne-POLDER data acquired over stratocumulus and cirrus clouds during two selected flights (on April 17 and April 18, 1994) of the European Cloud and Radiation Experiment (EUCREX'94) campaign. The bidirectional reflectances measured in the 0.86 μm channel are compared to plane-parallel cloud simulations computed with the microphysical models used by the International Satellite Cloud Climatology Project (ISCCP). Although clouds are not homogeneous plane-parallel layers, the extended cloud layers under study appear to act, on average, as a homogeneous plane-parallel layer. The standard water droplet model (with an effective radius of 10 μm) used in the ISCCP analysis seems to be suitable for stratocumulus clouds. The relative root-mean-square difference between the observed bidirectional reflectances and the model is only 2%. For cirrus clouds, the water droplet cloud model is definitely inadequate since the rms difference rises to 9%; when the ice polycrystal model chosen for the reanalysis of ISCCP data is used instead, the rms difference is reduced to 3%

L'expérience Ghyraf au Bénin : première comparaison entre suivi gravimétrique absolu et variation de stock hydrique

Sur le site soudanien du SO Amma-Catch, le projet ANR GHYRAF effectue des mesures trimestrielles de gravimétrie absolue depuis 2008. Ces mesures sont comparées à des variations gravimétriques simulées à partir des données hydrologiques (piézométrie, sonde à neutrons) appliquées à un modèle homogène du milieu souterrain. Les mesures gravimétriques sont cohérentes avec les observations hydrologiques et suffisamment précises pour assurer un suivi de la variabilité interannuelle des stocks ou une estimation de l'évapotranspiration. (Résumé d'auteur

Interactive comment on “Monitoring water accumulation in a glacier using magnetic resonance imaging” by A. Legchenko et al.

Tête Rousse is a small polythermal glacier located in the Mont Blanc area (French Alps) at an altitude of 3100 to 3300 m. In 1892, an outburst flood from this glacier released about 200 000 m3 of water mixed with ice, causing much damage. A new accumulation of melt water in the glacier was not excluded. The uncertainty related to such glacier conditions initiated an extensive geophysical study for evaluating the hazard. Using three-dimensional surface nuclear magnetic resonance imaging (3-D-SNMR), we showed that the temperate part of the Tête Rousse glacier contains two separate water-filled caverns (central and upper caverns). In 2009, the central cavern contained about 55 000 m3 of water. Since 2010, the cavern is drained every year. We monitored the changes caused by this pumping in the water distribution within the glacier body. Twice a year, we carried out magnetic resonance imaging of the entire glacier and estimated the volume of water accumulated in the central cavern. Our results show changes in cavern geometry and recharge rate: in two years, the central cavern lost about 73% of its initial volume, but 65% was lost in one year after the first pumping. We also observed that, after being drained, the cavern was recharged at an average rate of 20 to 25 m3 d−1 during the winter months and 120 to 180 m3 d−1 in summer. These observations illustrate how ice, water and air may refill englacial volume being emptied by artificial draining. Comparison of the 3-D-SNMR results with those obtained by drilling and pumping showed a very good correspondence, confirming the high reliability of 3-D-SNMR imaging

Aerosol retrieval experiments in the ESA Aerosol_cci project

Within the ESA Climate Change Initiative (CCI) project Aerosol_cci (2010–2013), algorithms for the production of long-term total column aerosol optical depth (AOD) datasets from European Earth Observation sensors are developed. Starting with eight existing pre-cursor algorithms three analysis steps are conducted to improve and qualify the algorithms: (1) a series of experiments applied to one month of global data to understand several major sensitivities to assumptions needed due to the ill-posed nature of the underlying inversion problem, (2) a round robin exercise of "best" versions of each of these algorithms (defined using the step 1 outcome) applied to four months of global data to identify mature algorithms, and (3) a comprehensive validation exercise applied to one complete year of global data produced by the algorithms selected as mature based on the round robin exercise. The algorithms tested included four using AATSR, three using MERIS and one using PARASOL. This paper summarizes the first step. Three experiments were conducted to assess the potential impact of major assumptions in the various aerosol retrieval algorithms. In the first experiment a common set of four aerosol components was used to provide all algorithms with the same assumptions. The second experiment introduced an aerosol property climatology, derived from a combination of model and sun photometer observations, as a priori information in the retrievals on the occurrence of the common aerosol components. The third experiment assessed the impact of using a common nadir cloud mask for AATSR and MERIS algorithms in order to characterize the sensitivity to remaining cloud contamination in the retrievals against the baseline dataset versions. The impact of the algorithm changes was assessed for one month (September 2008) of data: qualitatively by inspection of monthly mean AOD maps and quantitatively by comparing daily gridded satellite data against daily averaged AERONET sun photometer observations for the different versions of each algorithm globally (land and coastal) and for three regions with different aerosol regimes. The analysis allowed for an assessment of sensitivities of all algorithms, which helped define the best algorithm versions for the subsequent round robin exercise; all algorithms (except for MERIS) showed some, in parts significant, improvement. In particular, using common aerosol components and partly also a priori aerosol-type climatology is beneficial. On the other hand the use of an AATSR-based common cloud mask meant a clear improvement (though with significant reduction of coverage) for the MERIS standard product, but not for the algorithms using AATSR. It is noted that all these observations are mostly consistent for all five analyses (global land, global coastal, three regional), which can be understood well, since the set of aerosol components defined in Sect. 3.1 was explicitly designed to cover different global aerosol regimes (with low and high absorption fine mode, sea salt and dust)

Evidence and implications of solar eclipses in short wavelength global remotely sensed data

International audienc

GEOFCAN : actes du 2ème colloque de géophysique des sols et des formations superficielles : résumés étendus

A geophysical survey has been conducted in Siem Reap province of Cambodia. The aim was to test DC, TDEM and PMR methods to improve the borehole success rate. The preliminary results lead to the proposition of an implementation methodology which can be described as follows : 1) to use direct current methods (1D and 2D) in any case, as standard methods ; 2) to use jointly PMR, DC and TDEM methods, when the borehole success rate is less than 30% ; 3) to use jointly direct current and TDEM methods, when the success rate ranges 30 to 50% ; 4) to use electrical well logging (normal probes) to implement the borehole screens. (Résumé d'auteur