Statistical significance of notch fatigue prognoses based on the strain-energy-density method: Application to conventionally and additively manufactured materials

The inverse search determination of the strain-energy–density (SED) control radius R1 devised in Benedetti et al. Int J Fatigue 2019;126:306–318 and based on the knowledge of the notch fatigue factor estimated using an optimal V-notch specimen geometry is here reformulated to take into account the statistical properties of the input fatigue properties. It was found that R1 exhibits a non-symmetric probability density function that is well represented by a skew-normal distribution. The uncertainty in R1 can be attributed to the uncertainty in the inverse search procedure and to the material variability in notch sensitivity. By applying the devised procedure to real experimental data, it was found that the former contribution is preponderant in the assessment of very sharp notches, while the latter dictates the fatigue strength of blunt notches, especially in the case of intrinsically flawed materials, such as those additively manufactured

United Nations (1992),

References are listed under the heading(s) of the chapter(s) in which they are cited. The idea in duplicating some references in this way is to enable readers interested in one particular chapter, for example the informal sector, to be readily able to identify all the references made in that chapter. The 1993 SNA and two compendia are listed in the first section labelled General. The lists also include some references that are not explicitly cited in the Handbook but that provide useful background material or elaboration of the text. The documents are in English except where otherwise noted

Photovoltaic Energy Harvester with Power Management System

We present a photovoltaic energy harvester, realized in 0.35-μm CMOS technology. The proposed system collects light energy from the environment, by means of 2-mm2on-chip integrated microsolar cells, and accumulates it in an external capacitor. While the capacitor is charging, the load is disconnected. When the energy in the external capacitor is enough to operate the load for a predefined time slot, the load is connected to the capacitor by a power management circuit. The choice of the value of the capacitance determines the operating time slot for the load. The proposed solution is suitable for discrete-time-regime applications, such as sensor network nodes, or, in general, systems that require power supply periodically for short time slots. The power management circuit includes a charge pump, a comparator, a level shifter, and a linear voltage regulator. The whole system has been extensively simulated, integrated, and experimentally characterized

Stress concentration factors for planar square cell lattices with filleted junctions

n/

Fatigue properties of Ti6Al4V cellular specimens fabricated via SLM: CAD vs real geometry

Abstract Fully dense titanium alloy implants have long been used for the replacement and stabilization of damaged bone tissue. Nevertheless, they can cause stress shielding which brings to a loss of bone mass. Additive manufacturing (AM) allows obtaining highly porous cellular structures with a wide range of cell morphologies to tune the mechanical properties to match that of the patient's bone. In this work, the fully reversed fatigue strength of cellular specimens produced by Selective Laser Melting (SLM) of Ti-6Al-4V alloy was measured. Their structures are determined by cubic cells packed in six different ways and their elastic modulus is roughly 3GPa to match that of trabecular bone. Part of the specimens was left as sintered and part treated by Hot Isostatic Pressing (HIP). The fatigue resistance of such AM parts can be affected by surface morphology, geometrical accuracy as well as internal defects. Micro X-ray computed tomography (CT) was used in this work to compare the geometry of the produced specimens with the CAD model and to carry out residual stress measurements using the Plasma FIB-SEM-DIC micro-hole drilling method

Perspectives of stack and environmental monitoring in the surroundings of a waste-to-energy plant

Waste-to-Energy (WtE) processes respond both to the emerging need for reducing the flow of waste into the environment and, at the same time, to the increasing demand for energy. Despite, these evident advantages, WtE plants still present some critical issues regarding the emissions of heavy metals into the atmosphere, which are regulated by the environmental legislations but, concerning the European Union, are regarded as groups of metals with no consideration of the different carcinogenic potential of each metal. In addition, there are uncertainties on the estimation of the balance of carbon dioxide, which depends on several factors like transportation, type of incoming waste, processes in use and secondary emissions. Despite great improvements in air pollution control from this sector, persistent organic pollutants are still emitted by WtE plants. Therefore, the implementation of adequate environmental monitoring (EM) plans is essential to monitor the impact of WtE plants in their surroundings, especially in the presence of the population, fields and pastures. In view of these considerations, this paper aims to provide guidance on basic and novel approaches that are necessary for a comprehensive monitoring of the impacts of a new WtE plant in terms of air quality and public health. A case study regarding the EM plan proposed for a new WtE plant will also be reported as an example

Effect of Strut Cross Section and Strut Defect on Tensile Properties of Cubic Cellular Structure

n/

Utilização de palitos de erva-mate na produção de painéis de aglomerado.

bitstream/CNPF-2009-09/44872/1/com_tec214.pd

Recovery of pectinases from Aspergillus niger using aqueous two-phase systems / Recuperação de pectinases de Aspergillus niger usando sistemas aquosos bifásicos

This work aimed to study the purification of pectinases by aqueous two-phase systems (ATPS). The crude enzymatic extract was produced by Aspergillus niger ATCC 9642 and contained exo-polygalacturonase (exo-PG), pectinmethylesterase (PME) and pectin lyase (PMGL). The ATPS systems tested consisted in the combinations of polyethylene glycol (PEG) and potassium phosphate and sodium citrate, alcohol (ethanol, n-propanol and isopropanol) and salt (ammonium sulfate, potassium phosphate and sodium citrate). The experiments showed higher recoveries using ATPS system - PEG/phosphate for the exo-PG were using 16% PEG 4.0 kDa/4.8% NaCl and 16% PEG 1.5 kDa/without NaCl, obtaining purification factors (PF) of 1.37 and 1.21 times and recovery (R) of 49 and 59%, respectively. However, for the enzymes PME and PMGL were of 4.8 and 4.7 fold and 478 and 241%, respectively. When used ATPS system - PEG/sodium citrate the best PF were of 2.4, 7.85 and 5.7 and R of 100, 331 and 239% for exo-PG, PME and PMGL, respectively. The ATPS system is an alternative and efficient method for the recovery and/or purification of pectinases. This work aimed to study the purification of pectinases by aqueous two-phase systems (ATPS). The crude enzymatic extract was produced by Aspergillus niger ATCC 9642 and contained exo-polygalacturonase (exo-PG), pectinmethylesterase (PME) and pectin lyase (PMGL). The ATPS systems tested consisted in the combinations of polyethylene glycol (PEG) and potassium phosphate and sodium citrate, alcohol (ethanol, n-propanol and isopropanol) and salt (ammonium sulfate, potassium phosphate and sodium citrate). The experiments showed higher recoveries using ATPS system - PEG/phosphate for the exo-PG were using 16% PEG 4.0 kDa/4.8% NaCl and 16% PEG 1.5 kDa/without NaCl, obtaining purification factors (PF) of 1.37 and 1.21 times and recovery (R) of 49 and 59%, respectively. However, for the enzymes PME and PMGL were of 4.8 and 4.7 fold and 478 and 241%, respectively. When used ATPS system - PEG/sodium citrate the best PF were of 2.4, 7.85 and 5.7 and R of 100, 331 and 239% for exo-PG, PME and PMGL, respectively. The ATPS system is an alternative and efficient method for the recovery and/or purification of pectinases. This work aimed to study the purification of pectinases by aqueous two-phase systems (ATPS). The crude enzymatic extract was produced by Aspergillus niger ATCC 9642 and contained exo-polygalacturonase (exo-PG), pectinmethylesterase (PME) and pectin lyase (PMGL). The ATPS systems tested consisted in the combinations of polyethylene glycol (PEG) and potassium phosphate and sodium citrate, alcohol (ethanol, n-propanol and isopropanol) and salt (ammonium sulfate, potassium phosphate and sodium citrate). The experiments showed higher recoveries using ATPS system - PEG/phosphate for the exo-PG were using 16% PEG 4.0 kDa/4.8% NaCl and 16% PEG 1.5 kDa/without NaCl, obtaining purification factors (PF) of 1.37 and 1.21 times and recovery (R) of 49 and 59%, respectively. However, for the enzymes PME and PMGL were of 4.8 and 4.7 fold and 478 and 241%, respectively. When used ATPS system - PEG/sodium citrate the best PF were of 2.4, 7.85 and 5.7 and R of 100, 331 and 239% for exo-PG, PME and PMGL, respectively. The ATPS system is an alternative and efficient method for the recovery and/or purification of pectinases