Optimizing culture medium for debittering constitutive enzyme naringinase production by Aspergillus oryzae JMU316

The objective of this study was to investigate nutrient requirements for extracellular constitutive naringinase production by Aspergillus oryzae JMU316. The one-factor-at-a-time method was used to determine the impact of different carbon and nitrogen sources on naringinase production. Naringin exhibited the highest naringinase activity compared to all other carbon sources and pomelo pericarp powder produced comparable naringinase activity. Pomelo pericarp powder was selected as carbon source because it is a waste of fruit process, which means that it is a cheap resource and has additional environmental benefits. Peptone proved to be the most suitable nitrogen source for naringinase production. Subsequently, the orthogonal matrix method was used to further optimize the concentration of pomelo pericarp powder, peptone, and minerals. The optimal concentration of the components were15 g pomelo pericarp powder, 12 g peptone, 0.2 g CaCl2, 0.4 g NaCl, 2 g MgSO4·7H2O and 1 g K2HPO4 in 1 L distilled water for producing 408.28 IU/mL naringinase activity. The effects of medium components on naringinase were in the order of pomelo pericarp powder, K2HPO4, NaCl, peptone, CaCl2, MgSO4·7H2O. This two-step optimization strategy used in this study can be widely applied to other microbial fermentation processes.Key words: Pomelo pericarp powder, orthogonal matrix method, naringinase, culture medium optimization, Aspergillus oryzae JMU316

Band structure engineering in (Bi1-xSbx)2Te3 ternary topological insulators

Three-dimensional (3D) topological insulators (TI) are novel quantum materials with insulating bulk and topologically protected metallic surfaces with Dirac-like band structure. The spin-helical Dirac surface states are expected to host exotic topological quantum effects and find applications in spintronics and quantum computation. The experimental realization of these ideas requires fabrication of versatile devices based on bulk-insulating TIs with tunable surface states. The main challenge facing the current TI materials exemplified by Bi2Se3 and Bi2Te3 is the significant bulk conduction, which remains unsolved despite extensive efforts involving nanostructuring, chemical doping and electrical gating. Here we report a novel approach for engineering the band structure of TIs by molecular beam epitaxy (MBE) growth of (Bi1-xSbx)2Te3 ternary compounds. Angle-resolved photoemission spectroscopy (ARPES) and transport measurements show that the topological surface states exist over the entire composition range of (Bi1-xSbx)2Te3 (x = 0 to 1), indicating the robustness of bulk Z2 topology. Most remarkably, the systematic band engineering leads to ideal TIs with truly insulating bulk and tunable surface state across the Dirac point that behave like one quarter of graphene. This work demonstrates a new route to achieving intrinsic quantum transport of the topological surface states and designing conceptually new TI devices with well-established semiconductor technology.Comment: Minor changes in title, text and figures. Supplementary information adde

Direct evidence for charge stripes in a layered cobalt oxide

Recent experiments indicate that static stripe-like charge order is generic to the hole-doped copper oxide superconductors and competes with superconductivity. Here we show that a similar type of charge order is present in La5/3 Sr1/3 CoO4 , an insulating analogue of the copper oxide superconductors containing cobalt in place of copper. The stripe phase we have detected is accompanied by short-range, quasi-one-dimensional, antiferromagnetic order, and provides a natural explanation for the distinctive hour- glass shape of the magnetic spectrum previously observed in neutron scattering mea- surements of La2−xSrx CoO4 and many hole-doped copper oxide superconductors. The results establish a solid empirical basis for theories of the hourglass spectrum built on short-range, quasi-static, stripe correlations

Bioconjugates of Glucose Oxidase and Gold Nanorods Based on Electrostatic Interaction with Enhanced Thermostability

Bioconjugates made up of an enzyme and gold nanorods (GNRs) were fabricated by electrostatic interactions (layer-by-layer method, LBL) between anionic glucose oxidase (GOD) and positively charged GNRs. The assembled processes were monitored by UV–Vis spectra, zeta potential measurements, and transmission electron microscopy. The enzyme activity assays of the obtained bioconjugates display a relatively enhanced thermostability behavior in contrast with that of free enzyme. Free GOD in solution only retains about 22% of its relative activity at 90 °C. Unexpectedly, the immobilized GOD on GNRs still retains about 39.3% activity after the same treatment. This work will be of significance for the biologic enhancement using other kinds of anisotropic nanostructure and suggests a new way of enhancing enzyme thermostability using anisotropic metal nanomaterials

Hour-glass magnetic spectrum in an insulating, hole-doped antiferromagnet

Superconductivity in layered copper-oxide compounds emerges when charge carriers are added to antiferromagnetically-ordered CuO2 layers. The carriers destroy the antiferromagnetic order, but strong spin fluctuations persist throughout the superconducting phase and are intimately linked to super-conductivity. Neutron scattering measurements of spin fluctuations in hole-doped copper oxides have revealed an unusual `hour-glass' feature in the momentum-resolved magnetic spectrum, present in a wide range of superconducting and non-superconducting materials. There is no widely-accepted explanation for this feature. One possibility is that it derives from a pattern of alternating spin and charge stripes, an idea supported by measurements on stripe-ordered La1.875Ba0.125CuO4. However, many copper oxides without stripe order also exhibit an hour-glass spectrum$. Here we report the observation of an hour-glass magnetic spectrum in a hole-doped antiferromagnet from outside the family of superconducting copper oxides. Our system has stripe correlations and is an insulator, which means its magnetic dynamics can conclusively be ascribed to stripes. The results provide compelling evidence that the hour-glass spectrum in the copper-oxide superconductors arises from fluctuating stripes.Comment: 13 pages, 4 figures, to appear in Natur

Increased renal clearance of rocuronium compensates for chronic loss of bile excretion, via upregulation of Oatp2

Requirement for rocuronium upon surgery changes only minimally in patients with end-stage liver diseases. Our study consisted of both human and rat studies to explore the reason. The reduction rate of rocuronium infusion required to maintain neuromuscular blockade during the anhepatic phase (relative to paleohepatic phase) was examined in 16 children with congenital biliary atresia receiving orthotopic liver transplantation. Pharmacodynamics and pharmacokinetics of rocuronium were studied based on BDL rats. The role of increased Oatp2 and decrease Oatp1 expressions in renal compensation were explored. The reduction of rocuronium requirements significantly decreased in obstructively jaundiced children (24 +/- 9 vs. 39 +/- 11%). TOF50 in BDL rats was increased by functional removal of the kidneys but not the liver, and the percentage of rocuronium excretion through urine increased (20.3 +/- 6.9 vs. 8.6 +/- 1.8%), while that decreased through bile in 28d-BDL compared with control group. However, this enhanced renal secretion for rocuronium was eliminated by Oatp2 knock-down, rather than Oatp1 overexpression (28-d BDL vs. Oatp1-ShRNA or Oatp2-ShRNA, 20.3 +/- 6.9 vs. 17.0 +/- 6.6 or 9.3 +/- 3.2%). Upon chronic/sub-chronic loss of bile excretion, rocuronium clearance via the kidneys is enhanced, by Oatp2 up-regulation.published_or_final_versio

The molecular dynamic simulation on impact and friction characters of nanofluids with many nanoparticles system

Impact and friction model of nanofluid for molecular dynamics simulation was built which consists of two Cu plates and Cu-Ar nanofluid. The Cu-Ar nanofluid model consisted of eight spherical copper nanoparticles with each particle diameter of 4 nm and argon atoms as base liquid. The Lennard-Jones potential function was adopted to deal with the interactions between atoms. Thus motion states and interaction of nanoparticles at different time through impact and friction process could be obtained and friction mechanism of nanofluids could be analyzed. In the friction process, nanoparticles showed motions of rotation and translation, but effected by the interactions of nanoparticles, the rotation of nanoparticles was trapped during the compression process. In this process, agglomeration of nanoparticles was very apparent, with the pressure increasing, the phenomenon became more prominent. The reunited nanoparticles would provide supporting efforts for the whole channel, and in the meantime reduced the contact between two friction surfaces, therefore, strengthened lubrication and decreased friction. In the condition of overlarge positive pressure, the nanoparticles would be crashed and formed particles on atomic level and strayed in base liquid

Josephson supercurrent through a topological insulator surface state

Topological insulators are characterized by an insulating bulk with a finite band gap and conducting edge or surface states, where charge carriers are protected against backscattering. These states give rise to the quantum spin Hall effect without an external magnetic field, where electrons with opposite spins have opposite momentum at a given edge. The surface energy spectrum of a threedimensional topological insulator is made up by an odd number of Dirac cones with the spin locked to the momentum. The long-sought yet elusive Majorana fermion is predicted to arise from a combination of a superconductor and a topological insulator. An essential step in the hunt for this emergent particle is the unequivocal observation of supercurrent in a topological phase. Here, we present the first measurement of a Josephson supercurrent through a topological insulator. Direct evidence for Josephson supercurrents in superconductor (Nb) - topological insulator (Bi2Te3) - superconductor e-beam fabricated junctions is provided by the observation of clear Shapiro steps under microwave irradiation, and a Fraunhofer-type dependence of the critical current on magnetic field. The dependence of the critical current on temperature and length shows that the junctions are in the ballistic limit. Shubnikov-de Haas oscillations in magnetic fields up to 30 T reveal a topologically non-trivial two-dimensional surface state. We argue that the ballistic Josephson current is hosted by this surface state despite the fact that the normal state transport is dominated by diffusive bulk conductivity. The lateral Nb-Bi2Te3-Nb junctions hence provide prospects for the realization of devices supporting Majorana fermions

A genetic programming based fuzzy regression approach to modelling manufacturing processes

Fuzzy regression has demonstrated its ability to model manufacturing processes in which the processes have fuzziness and the number of experimental data sets for modelling them is limited. However, previous studies only yield fuzzy linear regression based process models in which variables or higher order terms are not addressed. In fact, it is widely recognised that behaviours of manufacturing processes do often carry interactions among variables or higher order terms. In this paper, a genetic programming based fuzzy regression GP-FR, is proposed for modelling manufacturing processes. The proposed method uses the general outcome of GP to construct models the structure of which is based on a tree representation, which could carry interaction and higher order terms. Then, a fuzzy linear regression algorithm is used to estimate the contributions and the fuzziness of each branch of the tree, so as to determine the fuzzy parameters of the genetic programming based fuzzy regression model.To evaluate the effectiveness of the proposed method for process modelling, it was applied to the modelling of a solder paste dispensing process. Results were compared with those based on statistical regression and fuzzy linear regression. It was found that the proposed method can achieve better goodness-of-fitness than the other two methods. Also the prediction accuracy of the model developed based on GP-FR is better than those based on the other two methods

Pelvic mass associated with raised CA 125 for benign condition: a case report

<p>Abstract</p> <p>Background</p> <p>Raised CA 125 with associated pelvic mass is highly suggestive of ovarian malignancy, but there are various other benign conditions that can be associated with pelvic mass and a raised CA 125.</p> <p>Case presentation</p> <p>We present a case of 19 year old, Caucasian British woman who presented initially with sudden onset right sided iliac fossa pain and on imaging was found to have 9.8 × 4.5 cm complex cystic mass in right adnexa with a raised CA 125 of 657, which was initially thought to be highly suspicious of cancer but was subsequently found to be due to pelvic inflammatory disease on histology.</p> <p>Conclusion</p> <p>This case highlights the fact that though a pelvic mass with raised CA 125 is highly suggestive of malignancy, pelvic inflammatory disease should always be considered as a differential diagnosis especially in a young patient and a thorough sexual history and screening for pelvic infection should always be carried out in these patients.</p