Are component positioning and prosthesis size associated with hip resurfacing failure?

BACKGROUND: Recent studies suggest that there is a learning curve for metal-on-metal hip resurfacing. The purpose of this study was to assess whether implant positioning changed with surgeon experience and whether positioning and component sizing were associated with implant longevity. METHODS: We evaluated the first 361 consecutive hip resurfacings performed by a single surgeon, which had a mean follow-up of 59 months (range, 28 to 87 months). Pre and post-operative radiographs were assessed to determine the inclination of the acetabular component, as well as the sagittal and coronal femoral stem-neck angles. Changes in the precision of component placement were determined by assessing changes in the standard deviation of each measurement using variance ratio and linear regression analysis. Additionally, the cup and stem-shaft angles as well as component sizes were compared between the 31 hips that failed over the follow-up period and the surviving components to assess for any differences that might have been associated with an increased risk for failure. RESULTS: Surgeon experience was correlated with improved precision of the antero-posterior and lateral positioning of the femoral component. However, femoral and acetabular radiographic implant positioning angles were not different between the surviving hips and failures. The failures had smaller mean femoral component diameters as compared to the non-failure group (44 versus 47 millimeters). CONCLUSIONS: These results suggest that there may be differences in implant positioning in early versus late learning curve procedures, but that in the absence of recognized risk factors such as intra-operative notching of the femoral neck and cup inclination in excess of 50 degrees, component positioning does not appear to be associated with failure. Nevertheless, surgeons should exercise caution in operating patients with small femoral necks, especially when they are early in the learning curve

Seroprevalence and distribution of arboviral infections among rural Kenyan adults: A cross-sectional study

<p>Abstract</p> <p>Background</p> <p>Arthorpod-borne viruses (arboviruses) cause wide-spread morbidity in sub-Saharan Africa, but little research has documented the burden and distribution of these pathogens.</p> <p>Methods</p> <p>Using a population-based, cross-sectional study design, we administered a detailed questionnaire and used ELISA to test the blood of 1,141 healthy Kenyan adults from three districts for the presence of anti-viral Immunoglobulin G (IgG) antibodies to the following viruses: dengue (DENV), West Nile (WNV), yellow fever (YFV), Chikungunya (CHIKV), and Rift Valley fever (RVFV).</p> <p>Results</p> <p>Of these, 14.4% were positive for DENV, 9.5% were WNV positive, 9.2% were YFV positive, 34.0% were positive for CHIKV and 0.7% were RVFV positive. In total, 46.6% had antibodies to at least one of these arboviruses.</p> <p>Conclusions</p> <p>For all arboviruses, district of residence was strongly associated with seropositivity. Seroprevalence to YFV, DENV and WNV increased with age, while there was no correlation between age and seropositivity for CHIKV, suggesting that much of the seropositivity to CHIKV is due to sporadic epidemics. Paradoxically, literacy was associated with increased seropositivity of CHIKV and DENV.</p

Measuring the burden of arboviral diseases: the spectrum of morbidity and mortality from four prevalent infections

<p>Abstract</p> <p>Background</p> <p>Globally, arthropod-borne virus infections are increasingly common causes of severe febrile disease that can progress to long-term physical or cognitive impairment or result in early death. Because of the large populations at risk, it has been suggested that these outcomes represent a substantial health deficit not captured by current global disease burden assessments.</p> <p>Methods</p> <p>We reviewed newly available data on disease incidence and outcomes to critically evaluate the disease burden (as measured by disability-adjusted life years, or DALYs) caused by yellow fever virus (YFV), Japanese encephalitis virus (JEV), chikungunya virus (CHIKV), and Rift Valley fever virus (RVFV). We searched available literature and official reports on these viruses combined with the terms "outbreak(s)," "complication(s)," "disability," "quality of life," "DALY," and "QALY," focusing on reports since 2000. We screened 210 published studies, with 38 selected for inclusion. Data on average incidence, duration, age at onset, mortality, and severity of acute and chronic outcomes were used to create DALY estimates for 2005, using the approach of the current Global Burden of Disease framework.</p> <p>Results</p> <p>Given the limitations of available data, nondiscounted, unweighted DALYs attributable to YFV, JEV, CHIKV, and RVFV were estimated to fall between 300,000 and 5,000,000 for 2005. YFV was the most prevalent infection of the four viruses evaluated, although a higher proportion of the world's population lives in countries at risk for CHIKV and JEV. Early mortality and long-term, related chronic conditions provided the largest DALY components for each disease. The better known, short-term viral febrile syndromes caused by these viruses contributed relatively lower proportions of the overall DALY scores.</p> <p>Conclusions</p> <p>Limitations in health systems in endemic areas undoubtedly lead to underestimation of arbovirus incidence and related complications. However, improving diagnostics and better understanding of the late secondary results of infection now give a first approximation of the current disease burden from these widespread serious infections. Arbovirus control and prevention remains a high priority, both because of the current disease burden and the significant threat of the re-emergence of these viruses among much larger groups of susceptible populations.</p

Dynamics and distribution of bacterial and archaeal communities in oil-contaminated temperate coastal mudflat mesocosms

Mudflats are ecologically important habitats that are susceptible to oil pollution, but intervention is difficult in these fine-grained sediments, and so clean-up usually relies on natural attenuation. Therefore, we investigated the impact of crude oil on the bacterial, diatom and archaeal communities within the upper parts of the diatom-dominated sediment and the biofilm that detached from the surface at high tide. Biodegradation of petroleum hydrocarbons was rapid, with a 50 % decrease in concentration in the 0–2-mm section of sediment by 3 days, indicating the presence of a primed hydrocarbon-degrading community. The biggest oil-induced change was in the biofilm that detached from the sediment, with increased relative abundance of several types of diatom and of the obligately hydrocarbonoclastic Oleibacter sp., which constituted 5 % of the pyrosequences in the oiled floating biofilm on day 3 compared to 0.6 % in the non-oiled biofilm. Differences in bacterial community composition between oiled and non-oiled samples from the 0–2-mm section of sediment were only significant at days 12 to 28, and the 2–4-mm-sediment bacterial communities were not significantly affected by oil. However, specific members of the Chromatiales were detected (1 % of sequences in the 2–4-mm section) only in the oiled sediment, supporting other work that implicates them in anaerobic hydrocarbon degradation. Unlike the Bacteria, the archaeal communities were not significantly affected by oil. In fact, changes in community composition over time, perhaps caused by decreased nutrient concentration and changes in grazing pressure, overshadowed the effect of oil for both Bacteria and Archaea. Many obligate hydrocarbonoclastic and generalist oil-degrading bacteria were isolated, and there was little correspondence between the isolates and the main taxa detected by pyrosequencing of sediment-extracted DNA, except for Alcanivorax, Thalassolituus, Cycloclasticus and Roseobacter spp., which were detected by both methods

Physical and sports activity after hip arthroplasty

A artroplastia é utilizada para reconstrução da articulação do quadril, visando minimizar a dor e possibilitar o retorno às atividades de vida diária, esportivas e de lazer. O objetivo deste artigo é analisar na literatura as indicações e contraindicações referentes à prática de atividade física, esportiva e lazer após a artroplastia de quadril. Essa revisão aborda estudos publicados entre os anos de 1980 e 2009, obtidos por buscas em bancos de dados eletrônicos Medline, Scielo, Ovid, Infomaworld, Sciencedirect, Springerlink, Interscience, Sportdiscuss, Bireme, Informglobal, Opas, Ovid, Diseasedex, Eric, que totalizaram 39 artigos. Os artigos analisados apontam para a utilização de atividade física, esportiva e de lazer de baixo impacto. como a caminhada, natação, boliche, ciclismo, dentre outras. Outra indicação constatada na literatura é a utilização da atividade física e esportiva visando à manutenção do condicionamento físico, qualidade óssea e controle do peso corporal. Há ressalvas na literatura sobre a utilização de atividades de alto impacto, esporte com giro como o basquete e futebol ou com grande intensidade como tênis e a corrida, bem como os esportes de luta. As atividades físicas, esportivas e de lazer mais indicadas após uma atroplastia de quadril são as de baixo impacto como a hidroginástica, natação, caminhada, dentre outras. O início dessas atividades deve aguardar a liberação do médico, mas em média iniciam 60 dias após a cirurgia.Hip arthroplasty is used for reconstruction of the hip joint to reduce pain and to make the return to daily life, physical, sports and leisure activities possible. The objective of this article was to analyze in the literature the indications and counter-indications referring to practice of physical, sportive and leisure activities after hip arthroplasty. This revision approaches studies published between 1980 and 2009, obtained in searches in the Medline, Scielo, Ovid, Infomaworld, Sciencedirect, Springerlink, Interscience, Sportdiscuss, Bireme, Informglobal, Opas, Ovid, Diseasedex and Erics electronic databases with a total of 39 articles. The analyzed articles point to the use of physical, leisure and sports of low impact activities such as walking, swimming, bowling, cycling and others. Another indication evidenced in the literature is the use of physical and sportive activity aiming at the maintenance of physical fitness, bone quality and body weight control. The literature shows concerns with the use of activities of high impact or with great intensity like tennis and jogging, as well as fights

Harmful Elements in Estuarine and Coastal Systems

Estuaries and coastal zones are dynamic transitional systems which provide many economic and ecological benefits to humans, but also are an ideal habitat for other organisms as well. These areas are becoming contaminated by various anthropogenic activities due to a quick economic growth and urbanization. This chapter explores the sources, chemical speciation, sediment accumulation and removal mechanisms of the harmful elements in estuarine and coastal seawaters. It also describes the effects of toxic elements on aquatic flora and fauna. Finally, the toxic element pollution of the Venice Lagoon, a transitional water body located in the northeastern part of Italy, is discussed as a case study, by presenting the procedures adopted to measure the extent of the pollution, the impacts on organisms and the restoration activities

Hexa-peri-hexabenzocoronene in organic electronics

C1 - Journal Articles RefereedPolycyclic aromatic hydrocarbons (PAHs) are in a class of functional organic compounds with increasing importance in organic electronics. Their tunable photophysical properties and typically strong intermolecular associations make them ideal materials in applications where control of charge mobility is essential. Hexa-peri-hexabenzocoronene (HBC) is a disc-shaped PAH that self-associates into columnar stacks through strong lπ-lΠ interactions. By decorating the periphery of the HBC molecule with various substituents, a range of properties and functions can be obtained including solution processability, liquid crystallinity, and semiconductivity. In this review article, the synthesis, properties, and functions of HBC derivatives are presented with focus on work published in the last five years

Controlled synthesis of poly(3-hexylthiophene) in continuous flow

There is an increasing demand for organic semiconducting materials with the emergence of organic electronic devices. In particular, large-area devices such as organic thin-film photovoltaics will require significant quantities of materials for device optimization, lifetime testing and commercialization. Sourcing large quantities of materials required for the optimization of large area devices is costly and often impossible to achieve. Continuous-flow synthesis enables straight-forward scale-up of materials compared to conventional batch reactions. In this study, poly(3-hexylthiophene), P3HT, was synthesized in a bench-top continuous-flow reactor. Precise control of the molecular weight was demonstrated for the first time in flow for conjugated polymers by accurate addition of catalyst to the monomer solution. The P3HT samples synthesized in flow showed comparable performance to commercial P3HT samples in bulk heterojunction solar cell devices