81 research outputs found
Detecting a stochastic background of gravitational radiation: Signal processing strategies and sensitivities
We analyze the signal processing required for the optimal detection of a
stochastic background of gravitational radiation using laser interferometric
detectors. Starting with basic assumptions about the statistical properties of
a stochastic gravity-wave background, we derive expressions for the optimal
filter function and signal-to-noise ratio for the cross-correlation of the
outputs of two gravity-wave detectors. Sensitivity levels required for
detection are then calculated. Issues related to: (i) calculating the
signal-to-noise ratio for arbitrarily large stochastic backgrounds, (ii)
performing the data analysis in the presence of nonstationary detector noise,
(iii) combining data from multiple detector pairs to increase the sensitivity
of a stochastic background search, (iv) correlating the outputs of 4 or more
detectors, and (v) allowing for the possibility of correlated noise in the
outputs of two detectors are discussed. We briefly describe a computer
simulation which mimics the generation and detection of a simulated stochastic
gravity-wave signal in the presence of simulated detector noise. Numerous
graphs and tables of numerical data for the five major interferometers
(LIGO-WA, LIGO-LA, VIRGO, GEO-600, and TAMA-300) are also given. The treatment
given in this paper should be accessible to both theorists involved in data
analysis and experimentalists involved in detector design and data acquisition.Comment: 81 pages, 30 postscript figures, REVTE
Observational constraints on holographic dark energy with varying gravitational constant
We use observational data from Type Ia Supernovae (SN), Baryon Acoustic
Oscillations (BAO), Cosmic Microwave Background (CMB) and observational Hubble
data (OHD), and the Markov Chain Monte Carlo (MCMC) method, to constrain the
cosmological scenario of holographic dark energy with varying gravitational
constant. We consider both flat and non-flat background geometry, and we
present the corresponding constraints and contour-plots of the model
parameters. We conclude that the scenario is compatible with observations. In
1 we find ,
, and
, while for the present value
of the dark energy equation-of-state parameter we obtain
.Comment: 12 pages, 2 figures, version published in JCA
Fitting the integrated Spectral Energy Distributions of Galaxies
Fitting the spectral energy distributions (SEDs) of galaxies is an almost
universally used technique that has matured significantly in the last decade.
Model predictions and fitting procedures have improved significantly over this
time, attempting to keep up with the vastly increased volume and quality of
available data. We review here the field of SED fitting, describing the
modelling of ultraviolet to infrared galaxy SEDs, the creation of
multiwavelength data sets, and the methods used to fit model SEDs to observed
galaxy data sets. We touch upon the achievements and challenges in the major
ingredients of SED fitting, with a special emphasis on describing the interplay
between the quality of the available data, the quality of the available models,
and the best fitting technique to use in order to obtain a realistic
measurement as well as realistic uncertainties. We conclude that SED fitting
can be used effectively to derive a range of physical properties of galaxies,
such as redshift, stellar masses, star formation rates, dust masses, and
metallicities, with care taken not to over-interpret the available data. Yet
there still exist many issues such as estimating the age of the oldest stars in
a galaxy, finer details ofdust properties and dust-star geometry, and the
influences of poorly understood, luminous stellar types and phases. The
challenge for the coming years will be to improve both the models and the
observational data sets to resolve these uncertainties. The present review will
be made available on an interactive, moderated web page (sedfitting.org), where
the community can access and change the text. The intention is to expand the
text and keep it up to date over the coming years.Comment: 54 pages, 26 figures, Accepted for publication in Astrophysics &
Space Scienc
Horizontal Branch Stars: The Interplay between Observations and Theory, and Insights into the Formation of the Galaxy
We review HB stars in a broad astrophysical context, including both variable
and non-variable stars. A reassessment of the Oosterhoff dichotomy is
presented, which provides unprecedented detail regarding its origin and
systematics. We show that the Oosterhoff dichotomy and the distribution of
globular clusters (GCs) in the HB morphology-metallicity plane both exclude,
with high statistical significance, the possibility that the Galactic halo may
have formed from the accretion of dwarf galaxies resembling present-day Milky
Way satellites such as Fornax, Sagittarius, and the LMC. A rediscussion of the
second-parameter problem is presented. A technique is proposed to estimate the
HB types of extragalactic GCs on the basis of integrated far-UV photometry. The
relationship between the absolute V magnitude of the HB at the RR Lyrae level
and metallicity, as obtained on the basis of trigonometric parallax
measurements for the star RR Lyrae, is also revisited, giving a distance
modulus to the LMC of (m-M)_0 = 18.44+/-0.11. RR Lyrae period change rates are
studied. Finally, the conductive opacities used in evolutionary calculations of
low-mass stars are investigated. [ABRIDGED]Comment: 56 pages, 22 figures. Invited review, to appear in Astrophysics and
Space Scienc
Methane and carbon dioxide fluxes and their regional scalability for the European Arctic wetlands during the MAMM project in summer 2012
Airborne and ground-based measurements of methane (CH4), carbon dioxide (CO2) and boundary layer thermodynamics were recorded over the Fennoscandian landscape (67â69.5° N, 20â28° E) in July 2012 as part of the MAMM (Methane and other greenhouse gases in the Arctic: Measurements, process studies and Modelling) field campaign. Employing these airborne measurements and a simple boundary layer box model, net regional-scale (~ 100 km) fluxes were calculated to be 1.2 ± 0.5 mg CH4 hâ1 mâ2 and â350 ± 143 mg CO2 hâ1 mâ2. These airborne fluxes were found to be relatively consistent with seasonally averaged surface chamber (1.3 ± 1.0 mg CH4 hâ1 mâ2) and eddy covariance (1.3 ± 0.3 mg CH4 hâ1 mâ2 and â309 ± 306 mg CO2 hâ1 mâ2) flux measurements in the local area. The internal consistency of the aircraft-derived fluxes across a wide swath of Fennoscandia coupled with an excellent statistical comparison with local seasonally averaged ground-based measurements demonstrates the potential scalability of such localised measurements to regional-scale representativeness. Comparisons were also made to longer-term regional CH4 climatologies from the JULES (Joint UK Land Environment Simulator) and HYBRID8 land surface models within the area of the MAMM campaign. The average hourly emission flux output for the summer period (JulyâAugust) for the year 2012 was 0.084 mg CH4 hâ1 mâ2 (minimum 0.0 and maximum 0.21 mg CH4 hâ1 mâ2) for the JULES model and 0.088 mg CH4 hâ1 mâ2 (minimum 0.0008 and maximum 1.53 mg CH4 hâ1 mâ2) for HYBRID8. Based on these observations both models were found to significantly underestimate the CH4 emission flux in this region, which was linked to the under-prediction of the wetland extents generated by the models
Impact de lâactivitĂ© solaire, anomalie globale de tempĂ©rature de lâair et oscillation dĂ©cadaire pacifique sur les cernes dâarbres en milieu urbain
Wood in Light Frame Construction
Gives an introduction to light-frame construction using lumber.Lumbermate Company (St. Louis, Missouri
Test Results from an Investigation of Parallel-Chord, Top-Chord-Bearing Wood Trusses
This report describes the results of 73 tests of top-chord-bearing, parallel-chord, metal-plate-connected wood trusses using various wood species, truss-plate sizes, and two different lumber orien-tations. The test units were separated into two phases, with Phase I including various replications as a pilot study for planning Phase II. Forty-six trusses were tested in Phase I. After an evaluation of the performances of these units, 27 trusses were designed for Phase II using other lumber species, more precise deflection measurement, and an up-graded plating design. The main objectives of the study were to provide information on deflection, shear strength, and bearing characteristics of these truss designs. An additional objective was to determine the effect of varying the gap between the inside edges of the bearing and the first vertical or diagonal web-members. The trusses were designed to put maximum stress on the heel joint. The tests showed that there are important additional deflection and force components resulting from the rotation of each end joint at the reactions. New design methodology and modeling are needed to reliably predict the performance of top-chord-bearing wood trusses
Wavelet analysis of covariance with application to atmospheric time series
Multiscale analysis of univariate time series has appeared in the literature at an ever increasing rate. Here we introduce the multiscale analysis of covariance between two time series using the discrete wavelet transform. The wavelet covariance and wavelet correlation are defined and applied to this problem as an alternative to traditional cross-spectrum analysis. The wavelet covariance is shown to decompose the covariance between two stationary processes on a scale by scale basis. Asymptotic normality is established for estimators of the wavelet covariance and correlation. Both quantities are generalized into the wavelet cross covariance and cross correlation in order to investigate possible lead/lag relationships. A thorough analysis of interannual variability-for the Madden-Julian oscillation is performed using a 35+ year record of daily station pressure series. The time localization of the discrete wavelet transform allows the subseries, which are associated with specific physical time scales, to be partitioned into both seasonal periods (such as summer and winter) and also according to El Niño-Southern Oscillation (ENSO) activity. Differences in variance and correlation between these periods may then be firmly established through statistical hypothesis testing. The daily station pressure series used here show clear evidence of increased variance and correlation in winter across Fourier periods of 16-128 days. During warm episodes of ENSO activity, a reduced variance is observed across Fourier periods of 8-512 days for the station pressure series from Truk Island and little or no correlation between station pressure series for the same periods. Copyright 2000 by the American Geophysical Union
Multiscale detection and location of multiple variance changes in the presence of long memory
Procedures for detecting change points in sequences of correlated observations (e.g., time series) can help elucidate their complicated structure. Current literature on the detection of multiple change points emphasizes the analysis of sequences of independent random variables. We address the problem of an unknown number of variance changes in the presence of long-range dependence (e.g., long memory processes). Our results are also applicable to time series whose spectrum slowly varies across octave bands. An iterated cumulative sum of squares procedure is introduced in order to look at the multiscale stationarity of a time series; that is, the variance structure of the wavelet coefficients on a scale by scale basis. The discrete wavelet transform enables us to analyze a given time series on a series of physical scales. The result is a partitioning of the wavelet coefficients into locally stationary regions. Simulations are performed to validate the ability of this procedure to detect and locate multiple variance changes. A âtimeâ series of vertical ocean shear measurements is also analyzed, where a variety of nonstationary features are identified
- âŠ