Alice: The Rosetta Ultraviolet Imaging Spectrograph

We describe the design, performance and scientific objectives of the NASA-funded ALICE instrument aboard the ESA Rosetta asteroid flyby/comet rendezvous mission. ALICE is a lightweight, low-power, and low-cost imaging spectrograph optimized for cometary far-ultraviolet (FUV) spectroscopy. It will be the first UV spectrograph to study a comet at close range. It is designed to obtain spatially-resolved spectra of Rosetta mission targets in the 700-2050 A spectral band with a spectral resolution between 8 A and 12 A for extended sources that fill its ~0.05 deg x 6.0 deg field-of-view. ALICE employs an off-axis telescope feeding a 0.15-m normal incidence Rowland circle spectrograph with a concave holographic reflection grating. The imaging microchannel plate detector utilizes dual solar-blind opaque photocathodes (KBr and CsI) and employs a 2 D delay-line readout array. The instrument is controlled by an internal microprocessor. During the prime Rosetta mission, ALICE will characterize comet 67P/Churyumov-Gerasimenko's coma, its nucleus, and the nucleus/coma coupling; during cruise to the comet, ALICE will make observations of the mission's two asteroid flyby targets and of Mars, its moons, and of Earth's moon. ALICE has already successfully completed the in-flight commissioning phase and is operating normally in flight. It has been characterized in flight with stellar flux calibrations, observations of the Moon during the first Earth fly-by, and observations of comet Linear T7 in 2004 and comet 9P/Tempel 1 during the 2005 Deep Impact comet-collision observing campaignComment: 11 pages, 7 figure

Multidisciplinary characterisation of sedimentary processes in a recent maar lake (Lake Pavin, French Massif Central) and implication for natural hazards

Sedimentation processes occurring in the most recent maar lake of the French Massif Central (Lake Pavin) are documented for the first time based on high resolution seismic reflection and multibeam bathymetric surveys and by piston coring and radiocarbon dating on a sediment depocentre developed on a narrow sub aquatic plateau. This new data set confirms the mid Holocene age of maar lake Pavin formation at 6970±60 yrs cal BP and highlights a wide range of gravity reworking phenomena affecting the basin. In particular, a slump deposit dated between AD 580–640 remoulded both mid-Holocene lacustrine sediments, terrestrial plant debris and some volcanic material from the northern crater inner walls. Between AD 1200 and AD 1300, a large slide scar mapped at 50 m depth also affected the southern edge of the sub aquatic plateau, suggesting that these gas-rich biogenic sediments (laminated diatomite) are poorly stable. Although several triggering mechanisms can be proposed for these prehistoric sub-aquatic mass wasting deposits in Lake Pavin, we argue that such large remobilisation of gas-rich sediments may affect the gas stability in deep waters of meromictic maar lakes. This study highlights the need to further document mass wasting processes in maar lakes and their impacts on the generation of waves, favouring the development of dangerous (and potentially deadly) limnic eruptions

How uncertainty enables non-classical dynamics

The uncertainty principle limits quantum states such that when one observable takes predictable values there must be some other mutually unbiased observables which take uniformly random values. We show that this restrictive condition plays a positive role as the enabler of non-classical dynamics in an interferometer. First we note that instantaneous action at a distance between different paths of an interferometer should not be possible. We show that for general probabilistic theories this heavily curtails the non-classical dynamics. We prove that there is a trade-off with the uncertainty principle, that allows theories to evade this restriction. On one extreme, non-classical theories with maximal certainty have their non-classical dynamics absolutely restricted to only the identity operation. On the other extreme, quantum theory minimises certainty in return for maximal non-classical dynamics.Comment: 4 pages + 4 page technical supplement, 2 figure

Numerical simulation of bus aerodynamics on several classes of bridge decks

This paper is focused on improving traffic safety on bridges under crosswind conditions, as adverse wind conditions can increase the risk of traffic accidents. Two ways to improve traffic safety are investigated: improving vehicle stability by means of wind fences installed on the bridge deck and by modifying the design parameters of the infrastructure. Specifically, this study examines the influence of different parameters related to the bridge deck configuration on the aerodynamic coefficients acting on a bus model under crosswind conditions. The aerodynamic coefficients related to side force, lift force and rollover moment are obtained for three classes of bridge deck (box, girder and board) by numerical simulation. FLUENT was used to solve the Reynolds-averaged Navier?Stokes (RANS) equations along with the shear stress transport (SST) k?? turbulence model. Two crash barriers located on the box bridge deck were replaced with an articulating wind fence model and the effect of the angle between the wind fence and the horizontal plane on the bus aerodynamic was investigated. The risk of rollover accidents was found to be slightly influenced by the bridge deck type for a yaw angle range between 75° and 120°. In order to study the effect of the yaw angle on the aerodynamic coefficients acting on bus, both the bus model and the bridge model were simultaneously rotated. The minimum value of the rollover coefficient was obtained for an angle of 60° between the wind fence slope and the horizontal plane. The only geometry parameter of the box bridge deck which significantly affects bus aerodynamics is the box height. The present research highlights the usefulness of computational fluid dynamics (CFD) for improving traffic safety, studying the performance of the articulating wind fence, and determining which geometry parameters of the box deck have a significant influence on the bus stability.This work was supported by the OASIS Research Project that was co financed by CDTI (Spanish Science and Innovation Ministry) and developed with the Spanish companies: Iridium, OHL Concesiones, Abertis, Sice, Indra, Dragados, OHL, Geocisa, GMV, Asfaltos Augusta, Hidrofersa, Eipsa, PyG, CPS, AEC and Torre de Comares Arquitectos S.L and 16 research centres. The authors also acknowledge the partial funding with FEDER funds under the Research Project FC-15-GRUPIN14-004. Finally, we also thanks to Swanson Analysis Inc. for the use of ANSYS University Research programs as well as the Workbench simulation environment

Dissociation constants and thermodynamic properties of amino acids used in CO2 absorption from (293 to 353) K

The second dissociation constants of the amino acids βalanine, taurine, sarcosine, 6-aminohexanoic acid, DL-methionine, glycine, L-phenylalanine, and L-proline and the third dissociation constants of L-glutamic acid and L-aspartic acid have been determined from electromotive force measurements at temperatures from (293 to 353) K. Experimental results are reported and compared to literature values. Values of the standard state thermodynamic properties are derived from the experimental results and compared to the values of commercially available amines used as absorbents for CO 2 capture.

Exhaled metabolite patterns to identify recent asthma exacerbations

Asthma is a chronic respiratory disease that can lead to exacerbations, defined as acute episodes of worsening respiratory symptoms and lung function. Predicting the occurrence of these exacerbations is an important goal in asthma management. The measurement of exhaled breath by electronic nose (eNose) may allow for the monitoring of clinically unstable asthma and exacerbations. However, data on its ability to perform this is lacking. We aimed to evaluate whether eNose could identify patients that recently had asthma exacerbations. We performed a cross-sectional study, measuring exhaled breath using the SpiroNose in adults with a physician-reported diagnosis of asthma. Patients were randomly divided into a training (n = 252) and validation (n = 109) set. For the analysis of eNose signals, principal component (PC) and linear discriminant analysis (LDA) were performed. LDA, based on PC1-4, reliably discriminated between patients who had a recent exacerbation from those who had not (training receiver operating characteristic (ROC)–area under the curve (AUC) = 0.76,95% CI 0.69–0.82), (validation AUC = 0.76, 95% CI 0.64–0.87). Our study showed that, exhaled breath analysis using eNose could accurately identify asthma patients who recently had an exacerbation, and could indicate that asthma exacerbations have a specific exhaled breath pattern detectable by eNose

Activity and Process Stability of Purified Green Pepper (Capsicum annuum) Pectin Methylesterase

Pectin methylesterase (PME) from green bell peppers (Capsicum annuum) was extracted and purified by affinity chromatography on a CNBr-Sepharose-PMEI column. A single protein peak with pectin methylesterase activity was observed. For the pepper PME, a biochemical characterization in terms of molar mass (MM), isoelectric points (pI), and kinetic parameters for activity and thermostability was performed. The optimum pH for PME activity at 22 °C was 7.5, and its optimum temperature at neutral pH was between 52.5 and 55.0 °C. The purified pepper PME required the presence of 0.13 M NaCl for optimum activity. Isothermal inactivation of purified pepper PME in 20 mM Tris buffer (pH 7.5) could be described by a fractional conversion model for lower temperatures (55?57 °C) and a biphasic model for higher temperatures (58?70 °C). The enzyme showed a stable behavior toward high-pressure/temperature treatments. Keywords: Capsicum annuum; pepper; pectin methylesterase; purification; characterization; thermal and high-pressure stabilit

A Strategy and Case Study Example for Designing and Implementing Environmental Long-Term Monitoring at Legacy Management Sites

Environmental monitoring objectives of site owners, regulators, consultants, and scientists typically share the common elements of (1) cost management, (2) risk management, and (3) information management (Figure 1). Many site owners focus on minimizing monitoring costs while regulators typically focus on risk and regulatory compliance. Scientists and consultants typically provide information management in the form of spreadsheets with extracted information provided in reports to other users. This common piecemeal approach upon individual focus on elements of the monitoring objectives, rather than the common objective of minimizing cost and risk using site information, results in missed opportunities for cost savings, environmental protection, and improved understanding of site performance