National Geodetic Satellite Program, Part II: Smithsonian Astrophysical Observatory

A sequence of advances in the determination of geodetic parameters presented by the Smithsonian Astrophysical Observatory are described. A Baker-Nunn photographic system was used in addition to a ruby-laser ranging system to obtain data for refinement of geodetic parameters. A summary of the data employed to: (1) derive coordinates for the locations of various tracking stations; and (2) determine the gravitational potential of the earth, is presented

Solving Quantum Ground-State Problems with Nuclear Magnetic Resonance

Quantum ground-state problems are computationally hard problems; for general many-body Hamiltonians, there is no classical or quantum algorithm known to be able to solve them efficiently. Nevertheless, if a trial wavefunction approximating the ground state is available, as often happens for many problems in physics and chemistry, a quantum computer could employ this trial wavefunction to project the ground state by means of the phase estimation algorithm (PEA). We performed an experimental realization of this idea by implementing a variational-wavefunction approach to solve the ground-state problem of the Heisenberg spin model with an NMR quantum simulator. Our iterative phase estimation procedure yields a high accuracy for the eigenenergies (to the 10^-5 decimal digit). The ground-state fidelity was distilled to be more than 80%, and the singlet-to-triplet switching near the critical field is reliably captured. This result shows that quantum simulators can better leverage classical trial wavefunctions than classical computers.Comment: 11 pages, 13 figure

Overview of power exhaust experiments in the COMPASS divertor with liquid metals

Power handling experiments with a special liquid metal divertor module based on the capillary porous system technology were performed in the tokamak COMPASS. The performance of two metals (Li and LiSn alloy) were tested for the first time in a divertor under ELMy H-mode conditions. No damage of the capillary mesh and a good exhaust capability were observed for both metals in two separate experiments with up to 12 MW/m(2) of deposited perpendicular, inter-ELM steady-state heat flux and with ELMs of relative energy similar to 3% and a local peak energy fluence at the module similar to 15 kJ.m(-2). No droplets were directly ejected from the mesh top surface and for the LiSn experiment, no contamination of the core and SOL plasmas by Sn was observed. The elemental depth profile analysis of 14 stainless-steel samples located around the vacuum vessel for each experiment provides information about the migration of evaporated/redeposited liquid elements

Crustal strain in central Greece from repeated GPS measurements in the interval 1989-1997

A 66-station GPS network spanning central Greece, first observed in 1989, has been occupied fully on three occasions: June 1989, October 1991 and May 1993. Subsets of this network bounding the Gulf of Korinthos have also been occupied in June 1995, October 1995, May 1996 and September/October 1997. The first three occupations were processed using a fiducial GPS methodology, whereas later surveys were processed using CODE precise orbits. Combination of data from different surveys to yield smooth site velocities requires global network translations at each epoch to compensate for errors in the realization of the reference frame. This method provides a posteriori estimates of the relative coordinate errors and reference frame noise. Only one earthquake, the 1995 June 15 Egion event, has caused significant local coseismic displacement, and its effects on the interseismic velocity field are removed using an elastic dislocation model. We constrain the orientation of the 100 yr triangulation—GPS velocity estimates of Davies et al. (1997) using 14 sites common to the two networks. The goodness of fit of this transformation indicates that the short-term and 100 yr geodetic estimates of deformation are highly compatible. We infer that short-term geodetic studies are capable of determining longer-term deformation rates provided that transient, local effects can be modelled. From the combined velocity field, we estimate principal strains and rigid-body rotation rates at points on a regular grid using data from neighbouring sites. Strain rates are high within the Gulf of Korinthos and much lower elsewhere. The extension rate across the Gulf of Korinthos increases from east to west. Comparison of the extension rate with historical and recent rates of seismic release of strain reveals significant medium-term seismic hazard in the western Gulf of Korinthos, and may also indicate long-term aseismic strai

Band structure of CuMnAs probed by optical and photoemission spectroscopy

The tetragonal phase of CuMnAs progressively appears as one of the key materials for antiferromagnetic spintronics due to efficient current-induced spin-torques whose existence can be directly inferred from crystal symmetry. Theoretical understanding of spintronic phenomena in this material, however, relies on the detailed knowledge of electronic structure (band structure and corresponding wave functions) which has so far been tested only to a limited extent. We show that AC permittivity (obtained from ellipsometry) and UV photoelectron spectra agree with density functional calculations. Together with the x-ray diffraction and precession electron diffraction tomography, our analysis confirms recent theoretical claim [Phys. Rev. B 96, 094406 (2017)] that copper atoms occupy lattice positions in the basal plane of the tetragonal unit cell

One-Step Purification of Recombinant Human Amelogenin and Use of Amelogenin as a Fusion Partner

Amelogenin is an extracellular protein first identified as a matrix component important for formation of dental enamel during tooth development. Lately, amelogenin has also been found to have positive effects on clinical important areas, such as treatment of periodontal defects, wound healing, and bone regeneration. Here we present a simple method for purification of recombinant human amelogenin expressed in Escherichia coli, based on the solubility properties of amelogenin. The method combines cell lysis with recovery/purification of the protein and generates a >95% pure amelogenin in one step using intact harvested cells as starting material. By using amelogenin as a fusion partner we could further demonstrate that the same method also be can explored to purify other target proteins/peptides in an effective manner. For instance, a fusion between the clinically used protein PTH (parathyroid hormone) and amelogenin was successfully expressed and purified, and the amelogenin part could be removed from PTH by using a site-specific protease

Bcl-2 protein family: Implications in vascular apoptosis and atherosclerosis

Apoptosis has been recognized as a central component in the pathogenesis of atherosclerosis, in addition to the other human pathologies such as cancer and diabetes. The pathophysiology of atherosclerosis is complex, involving both apoptosis and proliferation at different phases of its progression. Oxidative modification of lipids and inflammation differentially regulate the apoptotic and proliferative responses of vascular cells during progression of the atherosclerotic lesion. Bcl-2 proteins act as the major regulators of extrinsic and intrinsic apoptosis signalling pathways and more recently it has become evident that they mediate the apoptotic response of vascular cells in response to oxidation and inflammation either in a provocative or an inhibitory mode of action. Here we address Bcl-2 proteins as major therapeutic targets for the treatment of atherosclerosis and underscore the need for the novel preventive and therapeutic interventions against atherosclerosis, which should be designed in the light of molecular mechanisms regulating apoptosis of vascular cells in atherosclerotic lesions

Islet β-Cells Deficient in Bcl-xL Develop but Are Abnormally Sensitive to Apoptotic Stimuli

OBJECTIVE: Bcl-xL is an antiapoptotic member of the Bcl-2 family of proteins and a potent regulator of cell death. We investigated the importance of Bcl-xL for beta-cells by deleting the Bcl-x gene specifically in beta-cells and analyzing their survival in vivo and in culture. RESEARCH DESIGN AND METHODS: Islets with beta-cells lacking the Bcl-x gene were assessed in vivo by histology and by treatment of mice with low-dose streptozotocin (STZ). Islets were isolated by collagenase digestion and treated in culture with the apoptosis inducers staurosporine, thapsigargin, gamma-irradiation, proinflammatory cytokines, or Fas ligand. Cell death was assessed by flow cytometric analysis of subgenomic DNA. RESULTS: Bcl-xL-deficient beta-cells developed but were abnormally sensitive to apoptosis induced in vivo by low-dose STZ. Although a small proportion of beta-cells still expressed Bcl-xL, these did not have a survival advantage over their Bcl-xL-deficient neighbors. Islets appeared normal after collagenase isolation and whole-islet culture. They were, however, abnormally sensitive in culture to a number of different apoptotic stimuli including cytotoxic drugs, proinflammatory cytokines, and Fas ligand. CONCLUSIONS: Bcl-xL expression in beta-cells is dispensible during islet development in the mouse. Bcl-xL is, however, an important regulator of beta-cell death under conditions of synchronous stress. Bcl-xL expression at physiological levels may partially protect beta-cells from apoptotic stimuli, including apoptosis because of mediators implicated in type 1 diabetes and death or degeneration of transplanted islets

Morphological Transformations in the Magnetite Biomineralizing Protein Mms6 in Iron Solutions: A Small-Angle X-ray Scattering Study

Magnetotactic bacteria that produce magnetic nanocrystals of uniform size and well-defined morphologies have inspired the use of biomineralization protein Mms6 to promote formation of uniform magnetic nanocrystals in vitro. Small angle X-ray scattering (SAXS) studies in physiological solutions reveal that Mms6 forms compact globular three-dimensional (3D) micelles (approximately 10 nm in diameter) that are, to a large extent, independent of concentration. In the presence of iron ions in the solutions, the general micellar morphology is preserved, however, with associations among micelles that are induced by iron ions. Compared with Mms6, the m2Mms6 mutant (with the sequence of hydroxyl/carboxyl containing residues in the C-terminal domain shuffled) exhibits subtle morphological changes in the presence of iron ions in solutions. The analysis of the SAXS data is consistent with a hierarchical core–corona micellar structure similar to that found in amphiphilic polymers. The addition of ferric and ferrous iron ions to the protein solution induces morphological changes in the micellar structure by transforming the 3D micelles into objects of reduced dimensionality of 2, with fractal-like characteristics (including Gaussian-chain-like) or, alternatively, platelet-like structures