Micro-crystalline inclusions analysis by PIXE and RBS

A characteristic feature of the nuclear microprobe using a 3 MeV proton beam is the long range of particles (around 70 \mu m in light matrices). The PIXE method, with EDS analysis and using the multilayer approach for treating the X-ray spectrum allows the chemistry of an intra-crystalline inclusion to be measured, provided the inclusion roof and thickness at the impact point of the beam (Z and e, respectively) are known (the depth of the inclusion floor is Z + e). The parameter Z of an inclusion in a mineral can be measured with a precision of around 1 \mu m using a motorized microscope. However, this value may significantly depart from Z if the analyzed inclusion has a complex shape. The parameter e can hardly be measured optically. By using combined RBS and PIXE measurements, it is possible to obtain the geometrical information needed for quantitative elemental analysis. This paper will present measurements on synthetic samples to investigate the advantages of the technique, and also on natural solid and fluid inclusions in quartz. The influence of the geometrical parameters will be discussed with regard to the concentration determination by PIXE. In particular, accuracy of monazite micro-inclusion dating by coupled PIXE-RBS will be presented

Protocol for the United Kingdom Rotator Cuff Study (UKUFF) : a randomised controlled trial of open and arthroscopic rotator cuff repair

This project was funded by the NIHR Health Technology Assessment programme (project number 05/47/02). J. L. Rees has received a grant from Oxford University which is related to this paper. J. Dawson reports that Oxford University has received a grant from HTA which is related to this paper, as well as a study grant.Peer reviewedPublisher PD

The impact of reduction of doublet well spacing on the Net Present Value and the life time of fluvial Hot Sedimentary Aquifer doublets

This paper evaluates the impact of reduction of doublet well spacing, below the current West Netherlands Basin standard of 1000 to 1500 m, on the Net Present Value (NPV) and the life time of fluvial Hot Sedimentary Aquifer (HSA) doublets. First, a sensitivity analysis is used to show the possible advantage of such reduction on the NPV. The parameter value ranges are derived from West Netherlands Basin HSA doublet examples. The results indicate that a reduction of well spacing from 1400 to 1000 m could already influence NPV by up to 15%. This effect would be larger in more marginally economic HSA doublets compared to the West Netherlands Basin base case scenario. The possibility to reduce well spacing is supported by finite element production simulations, utilizing detailed facies architecture models. Furthermore, our results underline the necessity of detailed facies architecture models to assess the potential and risks of HSA doublets. This factor significantly affects doublet life time and net energy production of the doublet

Short-term soil response under plastic mulching in strawberry cultivation

Plastic mulches (PM) are known for increasing soil temperature and retaining soil moisture, suppressing weeds and avoiding ground contact of on-soil growing products. Thus, the use of PM in agriculture has been significantly increased in the last years, with important economic benefits for the farmers. Most studies dealing with PM emphasize the positive effects of this management, yet recent reports have shown that the use of PM is linked to a decrease of SOM content, soil erosion, soil contamination with plastic residues and in some cases to a high mycotoxin production by soil fungi. This questions the sustainability of the intensive use of PM in agriculture. The aim of this study was to assess the short-term modification of soil physicochemical and microbial parameters under PM, compared to no-mulch (NM). The experiment was conducted in a 2016-planted strawberry field. For each management (PM vs. NM) five plots were selected. Cultivation of strawberry in both PM and NM was done in a ridge-furrow system with subsurface irrigation. Samples were collected prior to the planting (T0) and successively at two (T1) and four months (T2) after planting. Different depths were sampled in the ridges (0-10, 10-30 and 30-60 cm) and in the furrows (0-10 and 10-40 cm). The analysis of the quantity and quality of soil organic matter is ongoing and comprised soil physicochemical analysis: pH, electrical conductivity, water content, bulk density and stability, organic C and N and density fractionation. Moreover, soil microbiology was studied via soil microbial carbon and mycotoxin occurrence as indicator of fungal stress. Additionally, temperature, humidity and pH of soil were daily recorded using an in-field installed measuring station. The continuously recorded environmental data showed differences in the temperature patterns between PM and NM, with highest average temperature under plastic. As well, pH and humidity data indicated differences between the treatments