764 research outputs found
Structural determination of bilayer graphene on SiC(0001) using synchrotron radiation photoelectron diffraction
In recent years there has been growing interest in the electronic properties of 'few layer' graphene films. Twisted layers, different stacking and register with the substrate result in remarkable unconventional couplings. These distinctive electronic behaviours have been attributed to structural differences, even if only a few structural determinations are available. Here we report the results of a structural study of bilayer graphene on the Si-terminated SiC(0001) surface, investigated using synchrotron radiation-based photoelectron diffraction and complemented by angle-resolved photoemission mapping of the electronic valence bands. Photoelectron diffraction angular distributions of the graphene C 1s component have been measured at different kinetic energies and compared with the results of multiple scattering simulations for model structures. The results confirm that bilayer graphene on SiC(0001) has a layer spacing of 3.48 Å and an AB (Bernal) stacking, with a distance between the C buffer layer and the first graphene layer of 3.24 Å. Our work generalises the use of a versatile and precise diffraction method capable to shed light on the structure of low-dimensional materials
Potts models in the continuum. Uniqueness and exponential decay in the restricted ensembles
In this paper we study a continuum version of the Potts model. Particles are
points in R^d, with a spin which may take S possible values, S being at least
3. Particles with different spins repel each other via a Kac pair potential. In
mean field, for any inverse temperature there is a value of the chemical
potential at which S+1 distinct phases coexist. For each mean field pure phase,
we introduce a restricted ensemble which is defined so that the empirical
particles densities are close to the mean field values. Then, in the spirit of
the Dobrushin Shlosman theory, we get uniqueness and exponential decay of
correlations when the range of the interaction is large enough. In a second
paper, we will use such a result to implement the Pirogov-Sinai scheme proving
coexistence of S+1 extremal DLR measures.Comment: 72 pages, 1 figur
Muon and Cosmogenic Neutron Detection in Borexino
Borexino, a liquid scintillator detector at LNGS, is designed for the
detection of neutrinos and antineutrinos from the Sun, supernovae, nuclear
reactors, and the Earth. The feeble nature of these signals requires a strong
suppression of backgrounds below a few MeV. Very low intrinsic radiogenic
contamination of all detector components needs to be accompanied by the
efficient identification of muons and of muon-induced backgrounds. Muons
produce unstable nuclei by spallation processes along their trajectory through
the detector whose decays can mimic the expected signals; for isotopes with
half-lives longer than a few seconds, the dead time induced by a muon-related
veto becomes unacceptably long, unless its application can be restricted to a
sub-volume along the muon track. Consequently, not only the identification of
muons with very high efficiency but also a precise reconstruction of their
tracks is of primary importance for the physics program of the experiment. The
Borexino inner detector is surrounded by an outer water-Cherenkov detector that
plays a fundamental role in accomplishing this task. The detector design
principles and their implementation are described. The strategies adopted to
identify muons are reviewed and their efficiency is evaluated. The overall muon
veto efficiency is found to be 99.992% or better. Ad-hoc track reconstruction
algorithms developed are presented. Their performance is tested against muon
events of known direction such as those from the CNGS neutrino beam, test
tracks available from a dedicated External Muon Tracker and cosmic muons whose
angular distribution reflects the local overburden profile. The achieved
angular resolution is 3-5 deg and the lateral resolution is 35-50 cm, depending
on the impact parameter of the crossing muon. The methods implemented to
efficiently tag cosmogenic neutrons are also presented.Comment: 42 pages. 32 figures on 37 files. Uses JINST.cls. 1 auxiliary file
(defines.tex) with TEX macros. submitted to Journal of Instrumentatio
Recommended from our members
New limits on heavy sterile neutrino mixing in -decay obtained with the Borexino detector
If heavy neutrinos with mass 2 are produced in the
Sun via the decay in a side
branch of pp-chain, they would undergo the observable decay into an electron, a
positron and a light neutrino . In the
present work Borexino data are used to set a bound on the existence of such
decays. We constrain the mixing of a heavy neutrino with mass 1.5 MeV 14 MeV to be
respectively. These are tighter limits on the mixing parameters than obtained
in previous experiments at nuclear reactors and accelerators.Comment: 7 pages, 6 figure
Recommended from our members
Solar neutrino with Borexino: results and perspectives
Borexino is a unique detector able to perform measurement of solar neutrinos
fluxes in the energy region around 1 MeV or below due to its low level of
radioactive background. It was constructed at the LNGS underground laboratory
with a goal of solar Be neutrino flux measurement with 5\% precision. The
goal has been successfully achieved marking the end of the first stage of the
experiment. A number of other important measurements of solar neutrino fluxes
have been performed during the first stage. Recently the collaboration
conducted successful liquid scintillator repurification campaign aiming to
reduce main contaminants in the sub-MeV energy range. With the new levels of
radiopurity Borexino can improve existing and challenge a number of new
measurements including: improvement of the results on the Solar and terrestrial
neutrino fluxes measurements; measurement of pp and CNO solar neutrino fluxes;
search for non-standard interactions of neutrino; study of the neutrino
oscillations on the short baseline with an artificial neutrino source (search
for sterile neutrino) in context of SOX project.Comment: 15 pages, 4 figure
Borexino calibrations: Hardware, Methods, and Results
Borexino was the first experiment to detect solar neutrinos in real-time in
the sub-MeV region. In order to achieve high precision in the determination of
neutrino rates, the detector design includes an internal and an external
calibration system. This paper describes both calibration systems and the
calibration campaigns that were carried out in the period between 2008 and
2011. We discuss some of the results and show that the calibration procedures
preserved the radiopurity of the scintillator. The calibrations provided a
detailed understanding of the detector response and led to a significant
reduction of the systematic uncertainties in the Borexino measurements
Recommended from our members
New experimental limits on the Pauli forbidden transitions in C nuclei obtained with 485 days Borexino data
The Pauli exclusion principle (PEP) has been tested for nucleons () in
with the Borexino detector.The approach consists of a search for
, , and emitted in a non-Paulian transition of
1- shell nucleons to the filled 1 shell in nuclei. Due to the
extremely low background and the large mass (278 t) of the Borexino detector,
the following most stringent up-to-date experimental bounds on PEP violating
transitions of nucleons have been established:
y, y,
y,
y and y, all at 90% C.L. The corresponding upper
limits on the relative strengths for the searched non-Paulian electromagnetic,
strong and weak transitions have been estimated: , and .Comment: 9 pages, 6 figure
New limits on nucleon decays into invisible channels with the BOREXINO Counting Test Facility
The results of background measurements with the second version of the
BOREXINO Counting Test Facility (CTF-II), installed in the Gran Sasso
Underground Laboratory, were used to obtain limits on the instability of
nucleons, bounded in nuclei, for decays into invisible channels ():
disappearance, decays to neutrinos, etc. The approach consisted of a search for
decays of unstable nuclides resulting from and decays of parents
C, C and O nuclei in the liquid scintillator and the water
shield of the CTF. Due to the extremely low background and the large mass (4.2
ton) of the CTF detector, the most stringent (or competitive) up-to-date
experimental bounds have been established: y, y, y and y, all at 90% C.L.Comment: 22 pages, 3 figures,submitted to Phys.Lett.
- …
