200 research outputs found
Carbon nanotubes as electrically active nanoreactors for multi-step inorganic synthesis: sequential transformations of molecules to nanoclusters, and nanoclusters to nanoribbons
In organic synthesis, the composition and structure of products are predetermined by the reaction conditions; however, the synthesis of well-defined inorganic nanostructures often presents a significant challenge yielding non-stoichiometric or polymorphic products. In this study, confinement in the nanoscale cavities of single-walled carbon nanotubes (SWNT) provides a new approach for multi-step inorganic synthesis where sequential chemical transformations take place within the same nanotube. In the first step, SWNT donate electrons to the reactant iodine molecules (I2) transforming them to iodide anions (I-). These then react with metal hexacarbonyls (M(CO)6, M = Mo or W) in the next step yielding anionic nanoclusters [M6I14]2-, the size and composition of which are strictly dictated by the nanotube cavity, as demonstrated by aberration corrected high resolution transmission electron microscopy (AC-HRTEM), scanning transmission electron microscopy (STEM) and energy dispersive X-ray (EDX) spectroscopy. Atoms in the nanoclusters [M6I14]2- are arranged in a perfect octahedral geometry and can engage in further chemical reactions within the nanotube, either reacting with each other leading to a new polymeric phase of molybdenum iodide [Mo6I12]n, or with hydrogen sulphide gas giving rise to nanoribbons of molybdenum/tungsten disulphide [MS2]n in the third step of the synthesis. Electron microscopy measurements demonstrate that the products of the multi-step inorganic transformations are precisely controlled by the SWNT nanoreactor, with complementary Raman spectroscopy revealing the remarkable property of SWNT to act as a reservoir of electrons during the chemical transformation. The electron transfer from the host-nanotube to the reacting guest-molecules is essential for stabilising the anionic metal iodide 2 nanoclusters and for their further transformation to metal disulphide nanoribbons synthesised in the nanotubes in high yield
Catalysis to discriminate single atoms from subnanometric ruthenium particles in ultra-high loading catalysts
We report a procedure for preparing ulta-high metal loading (10-20 % w/w Ru) Ru@C60 nanostructured catalysts comprising exclusively Ru single atoms. We show that by changing the Ru/C60 ratio and the nature of the solvent used during the synthesis, it is possible to increase the Ru loading up to 50% w/w, and to produce hetero-structures containing subnanometric Ru nanoparticles. Several techniques such as high-resolution transmission electron microscopy (HRTEM), scanning transmission electron microscopy â high angle annular dark field (STEM-HAADF), Raman spectroscopy, wideangle X-ray scattering (WAXS), extended X-ray absorption fine structure (EXAFS) and X-ray photoelectron spectroscopy (XPS) together with theoretical calculations were used to characterize these materials. At such high metal loading, the distinction between Ru single atoms and clusters is not trivial, even with this combination of techniques. We evaluated the catalytic properties of these materials for the hydrogenation of nitrobenzene and 2,3-dimethyl-2-butene. The catalysts containing only Ru single atoms are much less active for these reactions than the ones containing clusters. For nitrobenzene hydrogenation, this is because electro-deficient Ru single atoms and few atom Run clusters are not performant for H2 activation compared to larger clusters (n â„ 13), as shown by density functional theory (DFT) calculations. For the more crowded substrate 2,3-dimethyl-2-butene, DFT calculations have shown that this is due to steric hindrance. These simple tests can thus been used to distinguish samples containing metallic sub-nanometer nanoparticles. These novel catalysts are also extremely active for the hydrogenation of -substituted 2,3-dimethyl-2-butene
Survey of advanced nuclear technologies for potential applications of sonoprocessing
Ultrasonics has been used in many industrial applications for both sensing at low power and processing at higher power. Generally, the high power applications fall within the categories of liquid stream degassing, impurity separation, and sonochemical enhancement of chemical processes. Examples of such industrial applications include metal production, food processing, chemical production, and pharmaceutical production. There are many nuclear process streams that have similar physical and chemical processes to those applications listed above. These nuclear processes could potentially benefit from the use of high-power ultrasonics. There are also potential benefits to applying these techniques in advanced nuclear fuel cycle processes, and these benefits have not been fully investigated. Currently the dominant use of ultrasonic technology in the nuclear industry has been using low power ultrasonics for non-destructive testing/evaluation (NDT/NDE), where it is primarily used for inspections and for characterizing material degradation. Because there has been very little consideration given to how sonoprocessing can potentially improve efficiency and add value to important process streams throughout the nuclear fuel cycle, there are numerous opportunities for improvement in current and future nuclear technologies. In this paper, the relevant fundamental theory underlying sonoprocessing is highlighted, and some potential applications to advanced nuclear technologies throughout the nuclear fuel cycle are discussed
High activity redox catalysts synthesized by chemical vapor impregnation
The use of precious metals in heterogeneous catalysis relies on the preparation of small nanoparticles that are stable under reaction conditions. To date, most conventional routes used to prepare noble metal nanoparticles have drawbacks related to surface contamination, particle agglomeration, and reproducibility restraints. We have prepared titania-supported palladium (Pd) and platinum (Pt) catalysts using a simplified vapor deposition technique termed chemical vapor impregnation (CVI) that can be performed in any standard chemical laboratory. These materials, composed of nanoparticles typically below 3 nm in size, show remarkable activity under mild conditions for oxidation and hydrogenation reactions of industrial importance. We demonstrate the preparation of bimetallic PdâPt homogeneous alloy nanoparticles by this new CVI method, which show synergistic effects in toluene oxidation. The versatility of our CVI methodology to be able to tailor the composition and morphology of supported nanoparticles in an easily accessible and scalable manner is further demonstrated by the synthesis of PdshellâAucore nanoparticles using CVI deposition of Pd onto preformed Au nanoparticles supported on titania (prepared by sol immobilization) in addition to the presence of monometallic Au and Pd nanoparticles
Effect of the carbon nanotube surface characteristics on the conductivity and dielectric constant of carbon nanotube/poly(vinylidene fluoride) composites
Commercial multi-walled carbon nanotubes (CNT) were functionalized by oxidation with HNO3, to introduce oxygen-containing surface groups, and by thermal treatments at different temperatures for their selective removal. The obtained samples were characterized by adsorption of N2 at -196°C, temperature-programmed desorption and determination of pH at the point of zero charge. CNT/poly(vinylidene fluoride) composites were prepared using the above CNT samples, with different filler fractions up to 1 wt%. It was found that oxidation reduced composite conductivity for a given concentration, shifted the percolation threshold to higher concentrations, and had no significant effect in the dielectric response
CVD growth of carbon nanostructures from zirconia: mechanisms and a method for enhancing yield.
By excluding metals from synthesis, growth of carbon nanostructures via unreduced oxide nanoparticle catalysts offers wide technological potential. We report new observations of the mechanisms underlying chemical vapor deposition (CVD) growth of fibrous carbon nanostructures from zirconia nanoparticles. Transmission electron microscope (TEM) observation reveals distinct differences in morphological features of carbon nanotubes and nanofibers (CNTs and CNFs) grown from zirconia nanoparticle catalysts versus typical oxide-supported metal nanoparticle catalysts. Nanofibers borne from zirconia lack an observable graphitic cage consistently found with nanotube-bearing metal nanoparticle catalysts. We observe two distinct growth modalities for zirconia: (1) turbostratic CNTs 2-3 times smaller in diameter than the nanoparticle localized at a nanoparticle corner, and (2) nonhollow CNFs with approximately the same diameter as the nanoparticle. Unlike metal nanoparticle catalysts, zirconia-based growth should proceed via surface-bound kinetics, and we propose a growth model where initiation occurs at nanoparticle corners. Utilizing these mechanistic insights, we further demonstrate that preannealing of zirconia nanoparticles with a solid-state amorphous carbon substrate enhances growth yield.This material is based upon work supported by the National
Science Foundation under Grant No. 1007793 and was also
supported by Airbus group, Boeing, Embraer, Lockheed Martin,
Saab AB, Hexcel, and TohoTenax through MITâs Nano-
Engineered Composite aerospace STructures (NECST) Consortium.
This research was supported (in part) by the U.S. Army
Research Office under Contract W911NF-13-D-0001. This work
was performed in part at the Center for Nanoscale Systems
(CNS), a member of the National Nanotechnology Infrastructure
Network (NNIN), which is supported by the National
Science Foundation under NSF Award No. ECS-0335765. CNS
is part of Harvard University. This work was carried out in part
through the use of MIT Microsystems Technology Laboratories.
Stephan Hofmann acknowledges funding from EPSRC under
grant EP/H047565/1. Piran Kidambi acknowledges the
Lindemann Trust Fellowship.This is the final published version. It first appeared at http://pubs.acs.org/doi/abs/10.1021/ja509872y
Hall Measurements on Carbon Nanotube Paper Modified With Electroless Deposited Platinum
Carbon nanotube paper, sometimes referred to as bucky paper, is a random arrangement of carbon nanotubes meshed into a single robust structure, which can be manipulated with relative ease. Multi-walled carbon nanotubes were used to make the nanotube paper, and were subsequently modified with platinum using an electroless deposition method based on substrate enhanced electroless deposition. This involves the use of a sacrificial metal substrate that undergoes electro-dissolution while the platinum metal deposits out of solution onto the nanotube paper via a galvanic displacement reaction. The samples were characterized using SEM/EDS, and Hall-effect measurements. The SEM/EDS analysis clearly revealed deposits of platinum (Pt) distributed over the nanotube paper surface, and the qualitative elemental analysis revealed co-deposition of other elements from the metal substrates used. When stainless steel was used as sacrificial metal a large degree of Pt contamination with various other metals was observed. Whereas when pure sacrificial metals were used bimetallic Pt clusters resulted. The co-deposition of a bimetallic system upon carbon nanotubes was a function of the metal type and the time of exposure. Hall-effect measurements revealed some interesting fluctuations in sheet carrier density and the dominant carrier switched from N- to P-type when Pt was deposited onto the nanotube paper. Perspectives on the use of the nanotube paper as a replacement to traditional carbon cloth in water electrolysis systems are also discussed
Monodispersed Pd Nanoparticles for Acetylene Selective Hydrogenation: Particle Size and Support Effects
Electrospun green fibres from lignin and chitosan: a novel polycomplexation process for the production of lignin-based fibres
- âŠ