541 research outputs found
Behavior of polyethylene-based nanocomposites containing multi-layer graphene filler
open4siIn this research, the results regarding the characterization of electrical and mechanical properties of a low-density polyethylene (LDPE) - graphene-like (G) nanocomposite are presented. The processing technique used to fabricate the material was high-energy ball milling. This method was utilized to fabricate samples with a filler loading ranging from 1 wt% up to 7wt%. Low voltage broadband dielectric spectroscopy (BDS), erosion tests and breakdown tests (BD) were the measurements carried out in order to characterize the electrical behavior of the fabricated composites. Then, some of the mechanical properties of the LDPE-G nanocomposites were determined with dynamic mechanical analysis (DMA) and, finally, the crystalline structure of the material was investigated with differential scanning calorimetry (DSC).embargoed_20200114Rosi, G.F.; Frechette, M.; David, E.; Fabiani, D.Rosi, G.F.; Frechette, M.; David, E.; Fabiani, D
A comparison of two methods of quantifying masticatory pressures developed under dentures with variable occlusal widths
Pressures developed during mastication with removable dental prostheses have beer quantified by two methods. This pilot study (1) compares the peak pressure method of pressure quantification with the integrated curve method of quantification and (2) continues the exploration of the effect of the width of the occlusal table on pressures developed under dentures. A set of specially designed experimental dentures was constructed for one individual. The mandibular experimental denture contained a series of pressure transducers by which masticatory pressures were recorded. These pressures were monitored between the denture base and the residual ridge tissues. Several interchangeable posterior occlusal segments, varying only in the width of the occlusal table, were fabricated for the opposing maxillary denture. Masticatory pressure and total ridge pressure were quantified by the integrated curve method and the peak pressure method. Both methods indicated a direct relationship between masticatory pressures produced and the width of the occlusal table. A similar direct relationship between total ridge pressure and occlusal width was suggested statistically by the integrated curve method, and graphically by both methods.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73368/1/j.1365-2842.1979.tb00407.x.pd
Recommended from our members
Internal charge behaviour of nanocomposites
The incorporation of 23 nm titanium dioxide nanoparticles into an epoxy matrix to form a nanocomposite structure is described. It is shown that the use of nanometric particles results in a substantial change in the behaviour of the composite, which can be traced to the mitigation of internal charge when a comparison is made with conventional TiO2 fillers. A variety of diagnostic techniques (including dielectric spectroscopy, electroluminescence, thermally stimulated current, photoluminescence) have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act co-operatively with the host structure and cease to exhibit interfacial properties leading to Maxwell-Wagner polarization. It is postulated that the particles are surrounded by high charge concentrations in the Gouy-Chapman-Stern layer. Since nanoparticles have very high specific areas, these regions allow limited charge percolation through nano-filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accrue from the nano-formulated material. An optimum loading of about 10% (by weight) is indicated
Autonomy of Nations and Indigenous Peoples and the Environmental Release of Genetically Engineered Animals with Gene Drives
This article contends that the environmental release of genetically engineered (GE) animals with heritable traits that are patented will present a challenge to the efforts of nations and indigenous peoples to engage in self‐determination. The environmental release of such animals has been proposed on the grounds that they could function as public health tools or as solutions to the problem of agricultural insect pests. This article brings into focus two political‐economic‐legal problems that would arise with the environmental release of such organisms. To address those challenges, it is proposed that nations considering the environmental release of GE animals must take into account the underlying circumstances and policy failures that motivate arguments for the use of the modified animals. Moreover, countries must recognize that the UN International Covenant on Civil and Political Rights and the UN International Covenant on Economic, Social and Cultural Rights place on them an obligation to ensure that GE animals with patented heritable traits are not released without the substantive consent of the nations or indigenous peoples that could be affected
Weak pairwise correlations imply strongly correlated network states in a neural population
Biological networks have so many possible states that exhaustive sampling is
impossible. Successful analysis thus depends on simplifying hypotheses, but
experiments on many systems hint that complicated, higher order interactions
among large groups of elements play an important role. In the vertebrate
retina, we show that weak correlations between pairs of neurons coexist with
strongly collective behavior in the responses of ten or more neurons.
Surprisingly, we find that this collective behavior is described quantitatively
by models that capture the observed pairwise correlations but assume no higher
order interactions. These maximum entropy models are equivalent to Ising
models, and predict that larger networks are completely dominated by
correlation effects. This suggests that the neural code has associative or
error-correcting properties, and we provide preliminary evidence for such
behavior. As a first test for the generality of these ideas, we show that
similar results are obtained from networks of cultured cortical neurons.Comment: Full account of work presented at the conference on Computational and
Systems Neuroscience (COSYNE), 17-20 March 2005, in Salt Lake City, Utah
(http://cosyne.org
Comparing nuclear power trajectories in Germany and the UK: from ‘regimes' to ‘democracies’ in sociotechnical transitions and Discontinuities
This paper focuses on arguably the single most striking contrast in contemporary major energy politics in Europe (and even the developed world as a whole): the starkly differing civil nuclear policies of Germany and the UK. Germany is seeking entirely to phase out nuclear power by 2022. Yet the UK advocates a ‘nuclear renaissance’, promoting the most ambitious new nuclear construction programme in Western Europe.Here,this paper poses a simple yet quite fundamental question: what are the particular divergent conditions most strongly implicated in the contrasting developments in these two countries. With nuclear playing such an iconic role in historical discussions over technological continuity and transformation, answering this may assist in wider understandings of sociotechnical incumbency and discontinuity in the burgeoning field of‘sustainability transitions’. To this end, an ‘abductive’ approach is taken: deploying nine potentially relevant criteria for understanding the different directions pursued in Germany and the UK. Together constituted by 30 parameters spanning literatures related to socio-technical regimes in general as well as nuclear technology in particular, the criteria are divided into those that are ‘internal’ and ‘external’ to the ‘focal regime configuration’ of nuclear power and associated ‘challenger technologies’ like renewables.
It is ‘internal’ criteria that are emphasised in conventional sociotechnical regime theory, with ‘external’ criteria relatively less well explored. Asking under each criterion whether attempted discontinuation of nuclear power would be more likely in Germany or the UK, a clear picture emerges. ‘Internal’ criteria suggest attempted nuclear discontinuation should be more likely in the UK than in Germany– the reverse of what is occurring.
‘External’ criteria are more aligned with observed dynamics –especially those relating to military nuclear commitments and broader ‘qualities of democracy’. Despite many differences of framing concerning exactly what constitutes ‘democracy’, a rich political science literature on this point is unanimous in characterising Germany more positively than the UK. Although based only on a single case,a potentially important question is nonetheless raised as to whether sociotechnical regime theory might usefully give greater attention to the general importance of various aspects of democracy in constituting conditions for significant technological discontinuities and transformations. If so, the policy implications are significant. A number of important areas are identified for future research, including the roles of diverse understandings and specific aspects of democracy and the particular relevance of military nuclear commitments– whose under-discussion in civil nuclear policy literatures raises its own questions of democratic accountability
Why simulation can be efficient: on the preconditions of efficient learning in complex technology based practices
<p>Abstract</p> <p>Background</p> <p>It is important to demonstrate learning outcomes of simulation in technology based practices, such as in advanced health care. Although many studies show skills improvement and self-reported change to practice, there are few studies demonstrating patient outcome and societal efficiency.</p> <p>The objective of the study is to investigate if and why simulation can be effective and efficient in a hi-tech health care setting. This is important in order to decide whether and how to design simulation scenarios and outcome studies.</p> <p>Methods</p> <p>Core theoretical insights in Science and Technology Studies (STS) are applied to analyze the field of simulation in hi-tech health care education. In particular, a process-oriented framework where technology is characterized by its devices, methods and its organizational setting is applied.</p> <p>Results</p> <p>The analysis shows how advanced simulation can address core characteristics of technology beyond the knowledge of technology's functions. Simulation's ability to address skilful device handling as well as purposive aspects of technology provides a potential for effective and efficient learning. However, as technology is also constituted by organizational aspects, such as technology status, disease status, and resource constraints, the success of simulation depends on whether these aspects can be integrated in the simulation setting as well. This represents a challenge for future development of simulation and for demonstrating its effectiveness and efficiency.</p> <p>Conclusion</p> <p>Assessing the outcome of simulation in education in hi-tech health care settings is worthwhile if core characteristics of medical technology are addressed. This challenges the traditional technical versus non-technical divide in simulation, as organizational aspects appear to be part of technology's core characteristics.</p
On the integration of model-based feature information in Product Lifecycle Management systems
[EN] As CAD models continue to become more critical information sources in the product's lifecycle, it is necessary to develop efficient mechanisms to store, retrieve, and manage larger volumes of increasingly complex data. Because of their unique characteristics, 3D annotations can be used to embed design and manufacturing information directly into a CAD model, which makes models effective vehicles to describe aspects of the geometry or provide additional information that can be connected to a particular geometric element. However, access to this information is often limited, difficult, and even unavailable to external applications. As model complexity and volume of information continue to increase, new and more powerful methods to interrogate these annotations are needed.
In this paper, we demonstrate how 3D annotations can be effectively structured and integrated into a Product Lifecycle Management (PLM) system to provide a cohesive view of product-related information in a design environment. We present a strategy to organize and manage annotation information which is stored internally in a CAD model, and make it fully available through the PLM. Our method involves a dual representation of 3D annotations with enhanced data structures that provides shared and easy access to the information. We describe the architecture of a system which includes a software component for the CAD environment and a module that integrates with the PLM server. We validate our approach through a software prototype that uses a parametric modeling application and two commercial PLM packages with distinct data models.This work was supported by the Spanish Ministry of Economy and Competitiveness and the FEDER Funds, through the ANNOTA project (Ref. TIN2013-46036-C3-1-R).Camba, J.; Contero, M.; Company, P.; Pérez Lopez, DC. (2017). On the integration of model-based feature information in Product Lifecycle Management systems. International Journal of Information Management. 37(6):611-621. https://doi.org/10.1016/j.ijinfomgt.2017.06.002S61162137
Remembering the work of Phillip L. Geissler: A coda to his scientific trajectory
Phillip L. Geissler made important contributions to the statistical mechanics
of biological polymers, heterogeneous materials, and chemical dynamics in
aqueous environments. He devised analytical and computational methods that
revealed the underlying organization of complex systems at the frontiers of
biology, chemistry, and materials science. In this retrospective, we celebrate
his work at these frontiers
- …