Structural studies of mesoporous ZrO2_{2}-CeO2_{2} and ZrO2_{2}-CeO2_{2}/SiO2_{2} mixed oxides for catalytical applications

In this work the synthesis of ZrO$_{2}$-CeO$_{2}$ and ZrO$_{2}$-CeO$_{2}$/SiO$_{2}$ were developed, based on the process to form ordered mesoporous materials such as SBA-15 silica. The triblock copolymer Pluronic P-123 was used as template, aiming to obtain crystalline single phase walls and larger specific surface area, for future applications in catalysis. SAXS and XRD results showed a relationship between ordered pores and the material crystallization. 90% of CeO$_{2}$ leaded to single phase homogeneous ceria-zirconia solid solution of cubic fluorite structure (Fm$\bar{3}$m). The SiO$_{2}$ addition improved structural and textural properties as well as the reduction behavior at lower temperatures, investigated by XANES measurements under H$_{2}$ atmosphere

Pennsylvanian-Early Triassic stratigraphy in the Alborz Mountains (Iran)

New fieldwork was carried out in the central and eastern Alborz, addressing the sedimentary succession from the Pennsylvanian to the Early Triassic. A regional synthesis is proposed, based on sedimentary analysis and a wide collection of new palaeontological data. The Moscovian Qezelqaleh Formation, deposited in a mixed coastal marine and alluvial setting, is present in a restricted area of the eastern Alborz, transgressing on the Lower Carboniferous Mobarak and Dozdehband formations. The late Gzhelian–early Sakmarian Dorud Group is instead distributed over most of the studied area, being absent only in a narrow belt to the SE. The Dorud Group is typically tripartite, with a terrigenous unit in the lower part (Toyeh Formation), a carbonate intermediate part (Emarat and Ghosnavi formations, the former particularly rich in fusulinids), and a terrigenous upper unit (Shah Zeid Formation), which however seems to be confined to the central Alborz. A major gap in sedimentation occurred before the deposition of the overlying Ruteh Limestone, a thick package of packstone–wackestone interpreted as a carbonate ramp of Middle Permian age (Wordian–Capitanian). The Ruteh Limestone is absent in the eastern part of the range, and everywhere ends with an emersion surface, that may be karstified or covered by a lateritic soil. The Late Permian transgression was directed southwards in the central Alborz, where marine facies (Nesen Formation) are more common. Time-equivalent alluvial fans with marsh intercalations and lateritic soils (Qeshlaq Formation) are present in the east. Towards the end of the Permian most of the Alborz emerged, the marine facies being restricted to a small area on the Caspian side of the central Alborz. There, the Permo-Triassic boundary interval is somewhat similar to the Abadeh–Shahreza belt in central Iran, and contains oolites, flat microbialites and domal stromatolites, forming the base of the Elikah Formation. The P–T boundary is established on the basis of conodonts, small foraminifera and stable isotope data. The development of the lower and middle part of the Elikah Formation, still Early Triassic in age, contains vermicular bioturbated mudstone/wackestone, and anachronostic-facies-like gastropod oolites and flat pebble conglomerates. Three major factors control the sedimentary evolution. The succession is in phase with global sea-level curve in the Moscovian and from the Middle Permian upwards. It is out of phase around the Carboniferous–Permian boundary, when the Dorud Group was deposited during a global lowstand of sealevel. When the global deglaciation started in the Sakmarian, sedimentation stopped in the Alborz and the area emerged. Therefore, there is a consistent geodynamic control. From the Middle Permian upwards, passive margin conditions control the sedimentary evolution of the basin, which had its depocentre(s) to the north. Climate also had a significant role, as the Alborz drifted quickly northwards with other central Iran blocks towards the Turan active margin. It passed from a southern latitude through the aridity belt in the Middle Permian, across the equatorial humid belt in the Late Permian and reached the northern arid tropical belt in the Triassic

Enabling Cloud-based Computational Fluid Dynamics with a Platform-as-a-Service Solution

Computational Fluid Dynamics (CFD) is widely used in manufacturing and engineering from product design to testing. CFD requires intensive computational power and typically needs high performance computing to reduce potentially long experimentation times. Dedicated high performance computing systems are often expensive for small-to-medium enterprises (SMEs). Cloud computing claims to enable low cost access to high performance computing without the need for capital investment. The CloudSME Simulation Platform aims to provide a flexible and easy to use cloud-based Platform-as-a-Service (PaaS) technology that can enable SMEs to realize the benefits of high performance computing. Our Platform incorporates workflow management and multi-cloud implementation across various cloud resources. Here we present the components of our technology and experiences in using it to create a cloud-based version of the TransAT CFD software. Three case studies favourably compare the performance of a local cluster and two different clouds and demonstrate the viability of our cloud-based approach

Raman excitation spectroscopy of carbon nanotubes: effects of pressure medium and pressure

Raman excitation and emission spectra for the radial breathing mode (RBM) are reported, together with a preliminary analysis. From the position of the peaks on the two-dimensional plot of excitation resonance energy against Raman shift, the chiral indices (m, n) for each peak are identified. Peaks shift from their positions in air when different pressure media are added - water, hexane, sulphuric acid - and when the nanotubes are unbundled in water with surfactant and sonication. The shift is about 2 - 3 cm-1 in RBM frequency, but unexpectedly large in resonance energy, being spread over up to 100meV for a given peak. This contrasts with the effect of pressure. The shift of the peaks of semiconducting nanotubes in water under pressure is orthogonal to the shift from air to water. This permits the separation of the effects of the pressure medium and the pressure, and will enable the true pressure coefficients of the RBM and the other Raman peaks for each (m, n) to be established unambiguously.Comment: 6 pages, 3 Figures, Proceedings of EHPRG 2011 (Paris

Field reliability of GaAs emitters for fiber optic telecommunication systems

GaAs based emitters are widely used in telecommunication systems, and will be probably the core of short haul communications, even if a lot of doubts still exist on their reliability and the few available field results are not too optimistic. For these reasons we decided to follow with a particular attention all the problems related to these devices, investigating reliability by means of accelerated tests and of an accurate survey of field troubles. In this paper, we first of all report our field data, coming from more than five years experience, which show that "reasonable" results (in the range of 2000 FITs for LDs), can be obtained with commercially available devices; as a second step, failure analysis allows to localize failures,thus understanding the appropriate corrective actions to be taken. highlighting the specific process report also same For chip related failures, detailed examples are reported, different failure mechanisms, that, when not related to defects, are the same found during accelerated tests; we examples of failures due to interconnections and packaging

Eta photoproduction off the neutron at GRAAL: Evidence for a resonant structure at W=1.67 GeV

New (preliminary) data on eta photoproduction off the neutron are presented. These data reveal a resonant structure at W=1.67 GeV.Comment: 8 pages, 4 figures. Published in Proceedings of Workshop on the Physics of Excited Nucleons NSTAR2004, Grenoble, France, March 24 - 27, pg.19

A new limit on the light speed isotropy from the GRAAL experiment at the ESRF

When the electrons stored in the ring of the European Synchrotron Radiation Facility (ESRF, Grenoble) scatter on a laser beam (Compton scattering in flight) the lower energy of the scattered electron spectra, the Compton Edge (CE), is given by the two body photon-electron relativistic kinematics and depends on the velocity of light. A precision measurement of the position of this CE as a function of the daily variations of the direction of the electron beam in an absolute reference frame provides a one-way test of Relativistic Kinematics and the isotropy of the velocity of light. The results of GRAAL-ESRF measurements improve the previously existing one-way limits, thus showing the efficiency of this method and the interest of further studies in this direction.Comment: Proceed. MG12 meeting, Paris, July, 200

Validation of the Italian version of the Patient Reported Experience Measures for intermediate care services

Background: Intermediate care (IC) services are a key component of integrated care for elderly people, providing a link between hospital and home through provision of rehabilitation and health and social care. The Patient Reported Experience Measures (PREMs) are designed to measure user experience of care in IC settings. Objective: To examine the feasibility and the scaling properties of the Italian version of PREMs questionnaires for use in IC services. Methods: A cross-sectional survey was conducted on consecutive users of 1 home-based and 4 bed-based IC services in Emilia-Romagna (Italy). The main outcome measure was the PREMs questionnaire results. PREMs for each home- and bed-based IC services were translated, back-translated, and adapted through consensus among the members of the advisory board and pilot testing of face validity in 15 patients. A total of 199 questionnaires were returned from users of bed-based services and 185 were returned by mail from users of home-based services. The return rates and responses were examined. Mokken analysis was used to examine the scaling properties of the PREMs. Results: Analysis performed on the bed-based PREMs (N=154) revealed that 13 items measured the same construct and formed a moderate-strength scale (Loevinger H=0.488) with good reliability (Cronbach’s alpha =0.843). Analysis of home-based PREMs (N=134 records) revealed that 15 items constituted a strong scale (Loevinger H=0.543) with good reliability (Cronbach’s alpha =0.875). Conclusion: The Italian versions of the bed- and home-based IC-PREMs questionnaires proved to be valid and reliable tools to assess patients’ experience of care. Future plans include monitoring user experience over time in the same facilities and in other Italian IC settings for between-service benchmarking

Limits on light-speed anisotropies from Compton scattering of high-energy electrons

The possibility of anisotropies in the speed of light relative to the limiting speed of electrons is considered. The absence of sidereal variations in the energy of Compton-edge photons at the ESRF's GRAAL facility constrains such anisotropies representing the first non-threshold collision-kinematics study of Lorentz violation. When interpreted within the minimal Standard-Model Extension, this result yields the two-sided limit of 1.6 x 10^{-14} at 95% confidence level on a combination of the parity-violating photon and electron coefficients kappa_{o+} and c. This new constraint provides an improvement over previous bounds by one order of magnitude.Comment: 4 pages, 4 figure

rates of latent tuberculosis infection using different diagnostica test

Background.The interferon−g−release assays (IGRA) are emerging as an attractive alternative to the tuberculin skin test (TST) for the diagnosis of latent tuberculosis infection (LTBI).The absence of a gold standard for LTBI hampers the assessment of any diagnostic test. Methods.In a prospective study,229 patients (mean age 35.5±24.6 y) from different ward of the Hospital (Respiratory Diseases,Dermatology, Rheumatology, Pediatrics, Infectious Diseases, Hematology and Transplant Unit) were simultaneously tested for a suspect of either LTBI or active tuberculosis using all commercially available diagnostics: TST,QuantiFERON−TB Gold (QFT−2G), QuantiFERON−TB Gold In−Tube(QFT−3G) and T−SPOT.TB(TS.TB). Results. 42(18.3%),37(16.2%),59(25.8%) and 79(34.5%) patients were positive with TST,QFT−2G,QFT−3G and TS.TB, respectively.TS.TB(p<0.001) and QFT−3G(p=0.016) provided more positive results than TST, while no difference was found for TST and QFT−2G(p=0.53).All IGRA showed a good overall agreement (TS.TB vs QFT−2G,k=0.55; TS.TB vs QFT−3G,k=0.72;QFT−2G vs QFT−3G, k=0.62). In 22 subjects (9.6%) QFT−3G was positive and QFT−2G negative. Indeterminate results were more frequent with QFT−2G(18.3%) and QFT−3G (12.7%) than with TS.TB(1.3%,p<0.0001). Conclusion. Rates of LTBI as detected by different diagnostic tests may have significant variations. Performances of various IGRA formats were variable in this population