1,108 research outputs found

    Awareness, treatment and control of hypertension: Trend from population-based surveys conducted in a low-middle income country

    Get PDF
    Aim: To estimate and determine temporal trends for awareness, treatment and control of hypertension in adults from the urban area in Colombia. Methods: We conducted two population-based surveys (years 2010 and 2015) in the Metropolitan Area of Bucaramanga-Santander, Colombia, using the WHO STEPwise approach. Participants were asked to provide demographic, socioeconomic and cardiovascular risk factors data. Blood pressure (BP) was measured twice using an automated device. Hypertension was defined as a systolic BP≥140 mmHg, a diastolic BP≥90 mmHg or self-reported antihypertensive treatment. We estimated age, sex, and socioeconomic status (SES) adjusted prevalence ratios (PR), with 2010 as the reference survey, using poisson regression and correcting standard errors by clustering. Results: We evaluated 1,136 (mean age: 35.7 years; 43% male) and 872 (mean age:37.7 years; 41% male) adults from the 2010 and 2015 surveys, respectively. There were a larger proportion of individuals sampled from low SES in the 2015 as compared to the 2010 survey (93.6% vs. 70.9%). Overall, prevalence of hypertension was 16.4% (95%CI: 14.8 – 17.9): It increased significantly with age (from 2.4% among individuals 15-19 years old to 41.1% among individuals 50 years and older; p-trend<0.001) but did not differed by sex (17.8% in men vs. 15.4% in women) or year (16.1% vs. 16.6% in 2010 and 2015, respectively). Overall, prevalence of awareness, treatment and control of hypertension were 65.0%, 84.1%, and 62.2%, respectively. Although awareness and control increased from 2010 to 2015 (PR=1.05 and PR=1.12, respectively), only the prevalence of treatment showed a statistically significant increment of 11% (PR=1.11; 95%IC: 1.01 – 1.24). Implication: The STEPwise is a suitable surveillance strategy to estimate the burden of cardiovascular risk factors in low-middle income countries. Our results are consistent with national data from urban areas and show for the first time a short-time improvement in antihypertensive coverage

    Heterologous expression of AtNPR1 gene in olive for increasing fungal tolerance

    Get PDF
    The NPR1 gene encodes a key component of SAR signaling mediated by salicylic acid (SA). After a pathogen infection, the accumulation of SA releases NPR1 monomers in the cytosol that are translocated to the nucleus, activating the expression of pathogenesis-related (PR) genes. Overexpression of NPR1 has conferred resistance to fungal, viral and bacterial pathogens in several plant species. The aim of this research was to generate transgenic olive plants expressing the gene AtNPR1 from Arabidopsis thaliana to obtain material resistant to fungal pathogens. Three transgenic lines expressing AtNPR1 gene under the control of the constitutive promoter CaMV35S were obtained following the protocol of Torreblanca et al. (2010), using an embryogenic line derived from a seed of cv. Picual. Level of AtNPR1 expression in transgenic calli varied greatly among the different lines, being higher in the line NPR1-780. The elicitation of embryogenic calli in liquid medium with AS did not increase endochitinase activity, a PR protein. However, jasmonic acid induced a transient increase in chitinase activity after 24 h of treatment in all the lines, being the increment higher in transgenic NPR1 than in control. After maturation and germination of transgenic somatic embryos, plants were micropropagated and acclimated to ex vitro conditions. The expression of AtNPR1 did not alter the growth of transgenic plants neither in vitro nor in the greenhouse. Experiments are in progress to determine the resistance of transgenic AtNPR1 plants to V. dalihae and R. necatrix.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. Research projects: Plan Nacional AGL2014-52518-C2-1-R; AGL2017-83368-C2-1-R and Junta de Andalucía P11-AGR799

    Molino de martillos vs. Molinos de rodillo si efectos de l a molienda del cereal principal de la dieta sobre la productividad y la calidad del huevo en gallinas ponedoras rubias.

    Full text link
    La influencia del cereal principal de la dieta y el tipo de molienda sobre los parámetros productivos y la calidad del huevo fue estudiada en 420 ponedoras rubias de la estirpe Hy -Line en el período 24 a 59 semanas de vida. Se utilizó un diseño completamente al azar con 6 tratamientos ordenados factorialmente bajo un esquema 3 x 2, con 3 tipos de cereales (cebada, trigo blando y maíz) y dos tipos de moliendas (molino de martillo o molino de rodillos). Cada tratamiento fue replicado 7 veces y la unidad experimental consistió una jaula enriquecida con 10 gallinas. Las variables productivas de las aves fueron analizadas en periodos de 28 días y las variables de calidad del huevo fueron medidas en la semana 40 y 56 de vida respectivamente. El tamaño medio de partícula fue mayor en las dietas basadas en cebada que en las dietas basada en trigo o maíz, siendo estas diferencias más pronunciadas cuando se utilizó el martillo de rodillo para moler las dietas. La proporción de partículas menores de 2500 μm disminuyó con la utilización del molino de rodillo respecto al molino de martillo (13.2% vs. 6.0%). Teniendo en cuenta el periodo global del experimento, el consumo medio diario fue mayor en las gallinas que consumieron tanto trigo como maíz respecto a las que consumieron cebada (110.8 y 110.7 vs. 109.7 g/d; P< 0.05). Varias nteracciones fueron detectadas entre el cereal principal de la dieta y el tipo de molino utilizado, así el consumo medio diario (P< 0.01) y el porcentaje de puesta (P=0.09) fue similar en todas las dietas cuando el molino de martillo fue utilizado, sin embargo, ambas variables empeoraron cuando el molino de rodillo fue utilizado en la dieta basada en cebada respecto a la basada en trigo o maíz. A pesar de estos efectos, tanto en el consumo diario como en la puesta, ninguna de las variables productivas restantes fue afectada por el tratamiento. En cuanto a las variables relacionadas con la calidad de huevo, ninguna de las variables estudiadas fue afectada por el tratamiento. Con estas premisas, podemos concluir que el molino de rodillo puede utilizarse de forma exitosa para moler dietas basadas en cereales, especialmente trigo y maíz. Sin embargo, el molino de rodillo quizá no se adecuado para moler cereales con un porcentaje de fibra elevado como es el caso de la cebada

    Relationship between Determinants of Health, Equity, and Dimensions of Health Literacy in Patients with Cardiovascular Disease

    Get PDF
    Background: Health literacy (HL) has been linked to empowerment, use of health services, and equity. Evaluating HL in people with cardiovascular health problems would facilitate the development of suitable health strategies care and reduce inequity. Aim: To investigate the relationship between different dimensions that make up HL and social determinants in patients with cardiovascular disease. Methods: Observational, descriptive, cross-sectional study in patients with cardiovascular disease, aged 50-85 years, accessing primary care services in Valencia (Spain) in 2018-2019. The Health Literacy Questionnaire was used. Results: 252 patients. Age was significantly related with the ability to participate with healthcare providers (p = 0.043), ability to find information (p = 0.022), and understanding information correctly to know what to do (p = 0.046). Level of education was significant for all HL dimensions. Patients without studies scored lower in all dimensions. The low- versus middle-class social relationship showed significant results in all dimensions. Conclusions: In patients with cardiovascular disease, level of education and social class were social determinants associated with HL scores. Whilst interventions at individual level might address some HL deficits, inequities in access to cardiovascular care and health outcomes would remain unjustly balanced unless structural determinants of HL are taken into account

    Influence of a Concurrent Exercise Training Intervention during Pregnancy on Maternal and Arterial and Venous Cord Serum Cytokines: The GESTAFIT Project

    Get PDF
    The aim of the present study was to analyze the influence of a supervised concurrent exercise-training program, from the 17th gestational week until delivery, on cytokines in maternal (at 17th and 35th gestational week, and at delivery) and arterial and venous cord serum. Fifty-eight Caucasian pregnant women (age: 33.5 +/- 4.7 years old, body mass index: 23.6 +/- 4.1kg/m(2)) from the GESTAFIT Project (exercise (n = 37) and control (n = 21) groups) participated in this quasi-experimental study (per-protocol basis). The exercise group followed a 60-min 3 days/week concurrent (aerobic-resistance) exercise-training from the 17th gestational week to delivery. Maternal and arterial and venous cord serum cytokines (fractalkine, interleukin (IL)-1 beta, IL-6, IL-8, IL-10, interferon (IFN)-gamma, and tumor necrosis factor (TNF)-alpha) were assessed using Luminex xMAP technology. In maternal serum (after adjusting for the baseline values of cytokines), the exercise group decreased TNF-alpha (from baseline to 35th week, p = 0.02), and increased less IL-1 beta (from baseline to delivery, p = 0.03) concentrations than controls. When adjusting for other potential confounders, these differences became non-significant. In cord blood, the exercise group showed reduced arterial IL-6 and venous TNF-alpha (p = 0.03 and p = 0.001, respectively) and higher concentrations of arterial IL-1 beta (p = 0.03) compared to controls. The application of concurrent exercise-training programs could be a strategy to modulate immune responses in pregnant women and their fetuses. However, future research is needed to better understand the origin and clearance of these cytokines, their role in the maternal-placental-fetus crosstalk, and the influence of exercise interventions on them

    The Structure of the Vortex Liquid at the Surface of a Layered Superconductor

    Full text link
    A density-functional approach is used to calculate the inhomogeneous vortex density distribution in the flux liquid phase at the planar surface of a layered superconductor, where the external magnetic field is perpendicular to the superconducting layers and parallel to the surface. The interactions with image vortices are treated within a mean field approximation as a functional of the vortex density. Near the freezing transition strong vortex density fluctuations are found to persist far into the bulk liquid. We also calculate the height of the Bean-Livingston surface barrier.Comment: 8 pages, RevTeX, 2 figure

    Metastable liquid lamellar structures in binary and ternary mixtures of Lennard-Jones fluids

    Full text link
    We have carried out extensive equilibrium molecular dynamics (MD) simulations to investigate the Liquid-Vapor coexistence in partially miscible binary and ternary mixtures of Lennard-Jones (LJ) fluids. We have studied in detail the time evolution of the density profiles and the interfacial properties in a temperature region of the phase diagram where the condensed phase is demixed. The composition of the mixtures are fixed, 50% for the binary mixture and 33.33% for the ternary mixture. The results of the simulations clearly indicate that in the range of temperatures 78<T<102o78 < T < 102 ^{\rm o}K, --in the scale of argon-- the system evolves towards a metastable alternated liquid-liquid lamellar state in coexistence with its vapor phase. These states can be achieved if the initial configuration is fully disordered, that is, when the particles of the fluids are randomly placed on the sites of an FCC crystal or the system is completely mixed. As temperature decreases these states become very well defined and more stables in time. We find that below 90o90 ^{\rm o}K, the alternated liquid-liquid lamellar state remains alive for 80 ns, in the scale of argon, the longest simulation we have carried out. Nonetheless, we believe that in this temperature region these states will be alive for even much longer times.Comment: 18 Latex-RevTex pages including 12 encapsulated postscript figures. Figures with better resolution available upon request. Accepted for publication in Phys. Rev. E Dec. 1st issu

    Fracture experience among participants from the FROCAT study: what thresholding is appropriate using the FRAX tool?

    No full text
    ObjectiveTo perform an external validation of FRAX algorithm thresholds for reporting level of risk of fracture in Spanish women (low &lt;5%; intermediate ?5% and &lt;7.5%; high ?7.5%) taken from a prospective cohort “FRIDEX”.MethodsA retrospective study of 1090 women aged ?40 and ?90 years old obtained from the general population (FROCAT cohort). FRAX was calculated with data registered in 2002. All fractures were validated in 2012. Sensitivity analysis was performed.ResultsWhen analyzing the cohort (884) excluding current or past anti osteoporotic medication (AOM), using our nominated thresholds, among the 621 (70.2%) women at low risk of fracture, 5.2% [CI95%: 3.4–7.6] sustained a fragility fracture; among the 99 at intermediate risk, 12.1% [6.4–20.2]; and among the 164 defined as high risk, 15.9% [10.6–24.2]. Sensitivity analysis against model risk stratification FRIDEX of FRAX Spain shows no significant difference. By including 206 women with AOM, the sensitivity analysis shows no difference in the group of intermediate and high risk and minimal differences in the low risk group.ConclusionsOur findings support and validate the use of FRIDEX thresholds of FRAX when discussing the risk of fracture and the initiation of therapy with patients

    Three axis vector magnet set-up for cryogenic scanning probe microscopy

    Full text link
    We describe a three axis vector magnet system for cryogenic scanning probe microscopy measurements. We discuss the magnet support system and the power supply, consisting of a compact three way 100 A current source. We obtain tilted magnetic fields in all directions with maximum value of 5T along z-axis and of 1.2T for XY-plane magnetic fields. We describe a scanning tunneling microscopy-spectroscopy (STM-STS) set-up, operating in a dilution refrigerator, which includes a new high voltage ultralow noise piezodrive electronics and discuss the noise level due to vibrations. STM images and STS maps show atomic resolution and the tilted vortex lattice at 150 mK in the superconductor β-Bi2Pd. We observe a strongly elongated hexagonal lattice, which corresponds to the projection of the tilted hexagonal vortex lattice on the surface. We also discuss Magnetic Force Microscopy images in a variable temperature insertThis work was supported by Convocatoria Doctorados en el Exterior 568-2012 COLCIENCIAS, the Spanish MINECO (FIS2011-23488, MAT2011-27470-C02-02, CSD2009-00013), by the Comunidad de Madrid through program Nanofrontmag-CM (S2013/MIT-2850) and by Marie-Curie actions under the project FP7-PEOPLE-2013- CIG-618321. The research leading to these results has received funding from the European Union Seventh Framework Programme under Grant Agreement No. 604391 Graphene Flagship. We also acknowledge Banco Santander, COST MP1201. J.A. and C.M. acknowledge the FPI (BES- 2012-058600) and Juan de la Cierva (JCI-2011-08815) programs, respectivel

    Radon and material radiopurity assessment for the NEXT double beta decay experiment

    Full text link
    The Neutrino Experiment with a Xenon TPC (NEXT), intended to investigate the neutrinoless double beta decay using a high-pressure xenon gas TPC filled with Xe enriched in 136Xe at the Canfranc Underground Laboratory in Spain, requires ultra-low background conditions demanding an exhaustive control of material radiopurity and environmental radon levels. An extensive material screening process is underway for several years based mainly on gamma-ray spectroscopy using ultra-low background germanium detectors in Canfranc but also on mass spectrometry techniques like GDMS and ICPMS. Components from shielding, pressure vessel, electroluminescence and high voltage elements and energy and tracking readout planes have been analyzed, helping in the final design of the experiment and in the construction of the background model. The latest measurements carried out will be presented and the implication on NEXT of their results will be discussed. The commissioning of the NEW detector, as a first step towards NEXT, has started in Canfranc; in-situ measurements of airborne radon levels were taken there to optimize the system for radon mitigation and will be shown too.Comment: Proceedings of the Low Radioactivity Techniques 2015 workshop (LRT2015), Seattle, March 201
    corecore