Flex flap

To provide flap with large upper surface radius as required for airplanes with over-the-wing blowing, distort upper surface of flap by actuator. Flap can be used as control surface at leading as well as trailing edges and, with minor modification, as variant of Jacobs-Hurkamp air flap

Rational and affordable concepts of Landing Gear for small reentry vehicle demonstrators

The paper proposes an innovative solution for landing gear of small space vehicles, in particular of technological demonstrators of reentry space vehicles. After explaining why small space vehicles can benefit from landing gears, the work investigates a solution, which avoids the use of fluidic systems and minimizes constraints on the whole vehicle, thus limiting cost raising and making the installation of the landing gear easier on vehicles that originally did not envisage landing gears

Application of bifurcation methods for the prediction of low-speed aircraft ground performance

The design of aircraft for ground maneuvers is an essential part in satisfying the demanding requirements of the aircraft operators. Extensive analysis is done to ensure that a new civil aircraft type will adhere to these requirements, for which the nonlinear nature of the problem generally adds to the complexity of such calculations. Small perturbations in velocity, steering angle, or brake application may lead to significant differences in the final turn widths that can be achieved. Here, the U-turn maneuver is analyzed in detail, with a comparison between the two ways in which this maneuver is conducted. A comparison is also made between existing turn-width prediction methods that consist mainly of geometric methods and simulations and a proposed new method that uses dynamical systems theory. Some assumptions are made with regard to the transient behavior, for which it is shown that these assumptions are conservative when an upper bound is chosen for the transient distance. Furthermore, we demonstrate that the results from the dynamical systems analysis are sufficiently close to the results from simulations to be used as a valuable design tool. Overall, dynamical systems methods provide an order-of-magnitude increase in analysis speed and capability for the prediction of turn widths on the ground when compared with simulations. Nomenclature co = oleo damping coefficient, N s2 =m2 cz = tire vertical damping coefficient Fco = damping force in oleo due to the orifice,

Theoretical characterization of a model of aragonite crystal orientation in red abalone nacre

Nacre, commonly known as mother-of-pearl, is a remarkable biomineral that in red abalone consists of layers of 400-nm thick aragonite crystalline tablets confined by organic matrix sheets, with the $(001)$ crystal axes of the aragonite tablets oriented to within $\pm$ 12 degrees from the normal to the layer planes. Recent experiments demonstrate that this orientational order develops over a distance of tens of layers from the prismatic boundary at which nacre formation begins. Our previous simulations of a model in which the order develops because of differential tablet growth rates (oriented tablets growing faster than misoriented ones) yield patterns of tablets that agree qualitatively and quantitatively with the experimental measurements. This paper presents an analytical treatment of this model, focusing on how the dynamical development and eventual degree of order depend on model parameters. Dynamical equations for the probability distributions governing tablet orientations are introduced whose form can be determined from symmetry considerations and for which substantial analytic progress can be made. Numerical simulations are performed to relate the parameters used in the analytic theory to those in the microscopic growth model. The analytic theory demonstrates that the dynamical mechanism is able to achieve a much higher degree of order than naive estimates would indicate.Comment: 20 pages, 3 figure

Magnetorheological landing gear: 2. Validation using experimental data

Aircraft landing gears are subjected to a wide range of excitation conditions with conflicting damping requirements. A novel solution to this problem is to implement semi-active damping using magnetorheological (MR) fluids. In part 1 of this contribution, a methodology was developed that enables the geometry of a flow mode MR valve to be optimized within the constraints of an existing passive landing gear. The device was designed to be optimal in terms of its impact performance, which was demonstrated using numerical simulations of the complete landing gear system. To perform the simulations, assumptions were made regarding some of the parameters used in the MR shock strut model. In particular, the MR fluid's yield stress, viscosity, and bulk modulus properties were not known accurately. Therefore, the present contribution aims to validate these parameters experimentally, via the manufacture and testing of an MR shock strut. The gas exponent, which is used to model the shock strut's nonlinear stiffness, is also investigated. In general, it is shown that MR fluid property data at high shear rates are required in order to accurately predict performance prior to device manufacture. Furthermore, the study illustrates how fluid compressibility can have a significant influence on the device time constant, and hence on potential control strategies

Calcite distribution and orientation in the tergite exocuticle of the isopods porcellio scaber and armadillidium vulgare (Oniscidea, Crustacea) - A combined FE-SEM, polarized SCm-RSI and EBSD study

The crustacean cuticle is a bio-composite consisting of hierarchically organized chitin-protein fibres, reinforced with calcite, amorphous calcium carbonate and phosphates. Comparative studies revealed that the structure and composition of tergite cuticle of terrestrial isopods is adapted to the habitat of the animals, and to their behavioural patterns to avoid predation. In this contribution we use FE-SEM, polarized SCm-RSI and EBSD to investigate micro- and nano-patterns of mineral phase distribution and crystal orientation within the tergite cuticle of the two terrestrial isopod species Armadillidium vulgare and Porcellio scaber. The results show that the proximal regions of the exocuticle contain both calcite and ACC, with ACC located within the pore canals. Calcite forms hierarchically organised mesocrystalline aggregates of similar crystallographic orientation. Surprisingly, c-axis orientation preference is horizontal in regard to the local cuticle surface for both species, in contrast to mollusc and brachiopod shell structures in which the c-axis is always perpendicular to the shell surface. The overall sharpness of calcite crystal orientation is weak compared to that of mollusc shells. However, there are considerable differences in texture sharpness between the two isopod species. In the thick cuticle of the slow-walking A. vulgare calcite is more randomly oriented resulting in more isotropic mechanical properties of the cuticle. In contrast, the rather thin and more flexible cuticle of the fast- running P. scaber texture sharpness is stronger with a preference of c-axis orientation being parallel to the bilateral symmetry-plane of the animal, leading to more anisotropic mechanical properties of the cuticle. These differences may represent adaptations to different external and/or internal mechanical loads the cuticle has to resist during predatory attempts

Tetranucleotide and Low Microsatellite Instability Are Inversely Associated with the CpG Island Methylator Phenotype in Colorectal Cancer

MSH3 gene or protein deficiency or loss-of-function in colorectal cancer can cause a DNA mismatch repair defect known as “elevated microsatellite alterations at selected tetranucleotide repeats” (EMAST). A high percentage of MSI-H tumors exhibit EMAST, while MSI-L is also linked with EMAST. However, the distribution of CpG island methylator phenotype (CIMP) within the EMAST spectrum is not known. Five tetranucleotide repeat and five MSI markers were used to classify 100 sporadic colorectal tumours for EMAST, MSI-H and MSI-L according to the number of unstable markers detected. Promoter methylation was determined using methylation-specific PCR for MSH3, MCC, CDKN2A (p16) and five CIMP marker genes. EMAST was found in 55% of sporadic colorectal carcinomas. Carcinomas with only one positive marker (EMAST-1/5, 26%) were associated with advanced tumour stage, increased lymph node metastasis, MSI-L and lack of CIMP-H. EMAST-2/5 (16%) carcinomas displayed some methylation but MSI was rare. Carcinomas with ≥3 positive EMAST markers (13%) were more likely to have a proximal colon location and be MSI-H and CIMP-H. Our study suggests that EMAST/MSI-L is a valuable prognostic and predictive marker for colorectal carcinomas that do not display the high methylation phenotype CIMP-H

Imperfections in a two-dimensional hierarchical structure

Hierarchical and fractal designs have been shown to yield high mechanical efficiency under a variety of loading conditions. Here a fractal frame is optimized for compressive loading in a two-dimensional space. We obtain the dependence of volume required for stability against loading for which the structure is optimized and a set of scaling relationships is found. We evaluate the dependence of the Hausdorff dimension of the optimal structure on the applied loading and establish the limit to which it tends under gentle loading. We then investigate the effect of a single imperfection in the structure through both analytical and simulational techniques. We find that a single asymmetric perturbation of beam thickness, increasing or decreasing the failure load of the individual beam, causes the same decrease in overall stability of the structure. A scaling relationship between imperfection magnitude and decrease in failure loading is obtained. We calculate theoretically the limit to which the single perturbation can effect the overall stability of higher generation frames

Tissue-specific calibration of extracellular matrix material properties by transforming growth factor-beta and Runx2 in bone is required for hearing

Publisher version: http://www.nature.com/embor/journal/v11/n10/full/embor2010135.htmlDA - 20100917 IS - 1469-3178 (Electronic) IS - 1469-221X (Linking) LA - ENG PT - JOURNAL ARTICLEDA - 20100917 IS - 1469-3178 (Electronic) IS - 1469-221X (Linking) LA - ENG PT - JOURNAL ARTICLEDA - 20100917 IS - 1469-3178 (Electronic) IS - 1469-221X (Linking) LA - ENG PT - JOURNAL ARTICLEPhysical cues, such as extracellular matrix stiffness, direct cell differentiation and support tissue-specific function. Perturbation of these cues underlies diverse pathologies, including osteoarthritis, cardiovascular disease and cancer. However, the molecular mechanisms that establish tissue-specific material properties and link them to healthy tissue function are unknown. We show that Runx2, a key lineage-specific transcription factor, regulates the material properties of bone matrix through the same transforming growth factor-beta (TGFbeta)-responsive pathway that controls osteoblast differentiation. Deregulated TGFbeta or Runx2 function compromises the distinctly hard cochlear bone matrix and causes hearing loss, as seen in human cleidocranial dysplasia. In Runx2(+/-) mice, inhibition of TGFbeta signalling rescues both the material properties of the defective matrix, and hearing. This study elucidates the unknown cause of hearing loss in cleidocranial dysplasia, and demonstrates that a molecular pathway controlling cell differentiation also defines material properties of extracellular matrix. Furthermore, our results suggest that the careful regulation of these properties is essential for healthy tissue functio

Combination of Nanoindentation and Quantitative Backscattered Electron Imaging Revealed Altered Bone Material Properties Associated with Femoral Neck Fragility

Osteoporotic fragility fractures were hypothesized to be related to changes in bone material properties and not solely to reduction in bone mass. We studied cortical bone from the superior and inferior sectors of whole femoral neck sections from five female osteoporotic hip fracture cases (74–92 years) and five nonfractured controls (75–88 years). The typical calcium content (CaPeak) and the mineral particle thickness parameter (T) were mapped in large areas of the superior and inferior regions using quantitative backscattered electron imaging (qBEI) and scanning small-angle X-ray scattering, respectively. Additionally, indentation modulus (E) and hardness (H) (determined by nanoindentation) were compared at the local level to the mineral content (CaInd) at the indent positions (obtained from qBEI). CaPeak (−2.2%, P = 0.002), CaInd (−1.8%, P = 0.048), E (−5.6%, P = 0.040), and H (−6.0%, P = 0.016) were significantly lower for the superior compared to the inferior region. Interestingly, CaPeak as well as CaInd were also lower (−2.6%, P = 0.006, and –3.7%, P = 0.002, respectively) in fracture cases compared to controls, while E and H did not show any significant reduction. T values were in the normal range, independent of region (P = 0.181) or fracture status (P = 0.551). In conclusion, it appears that the observed femoral neck fragility is associated with a reduced mineral content, which was not accompanied by a reduction in stiffness and hardness of the bone material. This pilot study suggests that a stiffening process in the organic matrix component contributes to bone fragility independently of mineral content