8,562 research outputs found
The unusual distribution of molecular gas and star formation in Arp 140
We investigate the atomic and molecular interstellar medium and star
formation of NGC 275, the late-type spiral galaxy in Arp 140, which is
interacting with NGC 274, an early-type system. The atomic gas (HI)
observations reveal a tidal tail from NGC 275 which extends many optical radii
beyond the interacting pair. The HI morphology implies a prograde encounter
between the galaxy pair approximately 1.5 x 10**8 years ago. The Halpha
emission from NGC 275 indicates clumpy irregular star-formation, clumpiness
which is mirrored by the underlying mass distribution as traced by the Ks-band
emission. The molecular gas distribution is striking in its anti-correlation
with the {HII regions. Despite the evolved nature of NGC 275's interaction and
its barred potential, neither the molecular gas nor the star formation are
centrally concentrated. We suggest that this structure results from stochastic
star formation leading to preferential consumption of the gas in certain
regions of the galaxy. In contrast to the often assumed picture of interacting
galaxies, NGC 275, which appears to be close to merger, does not display
enhanced or centrally concentrated star formation. If the eventual merger is to
lead to a significant burst of star formation it must be preceded by a
significant conversion of atomic to molecular gas as at the current rate of
star formation all the molecular gas will be exhausted by the time the merger
is complete.Comment: 13 paper, accepted my Monthly Notices of the Royal Astronomical
Societ
Supply chain regulation in Scottish social care: facilitators and barriers
Drawing on a study of a Scottish government initiative to ensure the provision of a living wage to social care workers, the paper sheds new light on the value of regulating domestic supply chains to enhance labour standards in supplier organisations, and the factors that facilitate and hinder such regulation. The study confirms that supply chains driven by monopsonistic purchasers tend to drive down employment conditions, while indicating that the studied initiative met with a good deal of success due to a combination of the government generated âsoftâ regulation and support from care providers that reflected both value and pragmatic considerations. It also highlights the contradictory tensions that can arise between policy aspirations and business objectives and suggests that to be effective, initiatives to enhance labour standards in supply chains need to address adverse market dynamics
Below-cost legislation: lessons from the Republic of Ireland
This paper traces the emergence, evolution, and demise of below cost legislation in the grocery industry in the republic of Ireland. The paper adds to our understanding of the legislation by adopting the view that, by using the net invoice price as its definition of cost, the legislation increased two streams of quasi-rents, first on suppliersâ brandeds and second on retailersâ own brands which acted to depress competitive forces and direct supplier-buyer negotiations to off-invoice discounts. Supplier generated quasi-rents financed discounts, and when coupled with retailersâ higher margins on their own brands, provided little incentive for a return to a price competitive environment. Two factors undermined this situation: the substitution of discountersâ products for suppliersâ brands as the discounters share of the market grew and the increase in cross border shopping. These had the combined effect of reducing the available quasi-rents earned in the Irish market resulting in the breakdown of the status quo and a return to price competition. Through its impact on negotiations, the legislation also introduced inefficiencies to both retailersâ and suppliers businesses representing additional waste that could have been more productively used to reduce consumer prices. The paper endorses the Governmentâs decision to rescind the order and remove an important constraint on both vertical and horizontal competition. Lessons from the Republic of Ireland suggest that the competitive response to the removal of below cost legislation, and reductions in prices, may take time and will depend on economic circumstances and a change in the prevailing norms of organizational behaviour and quasi-rent seeking opportunitie
Recommended from our members
County-Level Hispanic Ethnic Density and Cardiovascular Disease Mortality.
Background Hispanics are the fastest growing ethnic group in the United States, and little is known about how Hispanic ethnic population density impacts cardiovascular disease ( CVD ) mortality. Methods and Results We examined county-level deaths for Hispanics and non-Hispanic whites from 2003 to 2012 using data from the National Center for Health Statistics' Multiple Cause of Death mortality files. Counties with more than 20 Hispanic deaths (n=715) were included in the analyses. CVD deaths were identified using International Classification of Diseases, Tenth Revision (ICD-10), I00 to I78, and population estimates were calculated using linear interpolation from 2000 and 2010 census data. Multivariate linear regression was used to examine the association of Hispanic ethnic density with Hispanic and non-Hispanic white age-adjusted CVD mortality rates. County-level age-adjusted CVD mortality rates were adjusted for county-level demographic, socioeconomic, and healthcare factors. There were a total of 4Â 769Â 040 deaths among Hispanics (n=382Â 416) and non-Hispanic whites (n=4Â 386Â 624). Overall, cardiovascular age-adjusted mortality rates were higher among non-Hispanic whites compared with Hispanics (244.8 versus 189.0 per 100Â 000). Hispanic density ranged from 1% to 96% in each county. Counties in the highest compared with lowest category of Hispanic density had 60% higher Hispanic mortality (215.3 versus 134.2 per 100Â 000 population). In linear regression models, after adjusting for county-level demographic, socioeconomic, and healthcare factors, increasing Hispanic ethnic density remained strongly associated with mortality for Hispanics but not for non-Hispanic whites. Conclusions CVD mortality is higher in counties with higher Hispanic ethnic density. County-level characteristics do not fully explain the higher CVD mortality among Hispanics in ethnically concentrated counties
Recommended from our members
Fast three dimensional r-adaptive mesh redistribution
This paper describes a fast and reliable method for redistributing a computational mesh in three dimensions which can generate a complex three dimensional mesh without any problems due to mesh tangling. The method relies on a three dimensional implementation of the parabolic MongeâAmpĂšre (PMA) technique, for finding an optimally transported mesh. The method for implementing PMA is described in detail and applied to both static and dynamic mesh redistribution problems, studying both the convergence and the computational cost of the algorithm. The algorithm is applied to a series of problems of increasing complexity. In particular very regular meshes are generated to resolve real meteorological features (derived from a weather forecasting model covering the UK area) in grids with over 2Ă107 degrees of freedom. The PMA method computes these grids in times commensurate with those required for operational weather forecasting
Mantises exchange angular momentum between three rotating body parts to jump precisely to targets.
Flightless animals have evolved diverse mechanisms to control their movements in air, whether falling with gravity or propelling against it. Many insects jump as a primary mode of locomotion and must therefore precisely control the large torques generated during takeoff. For example, to minimize spin (angular momentum of the body) at takeoff, plant-sucking bugs apply large equal and opposite torques from two propulsive legs [1]. Interacting gear wheels have evolved in some to give precise synchronization of these legs [2, 3]. Once airborne, as a result of either jumping or falling, further adjustments may be needed to control trajectory and orient the body for landing. Tails are used by geckos to control pitch [4, 5] and by Anolis lizards to alter direction [6, 7]. When falling, cats rotate their body [8], while aphids [9] and ants [10, 11] manipulate wind resistance against their legs and thorax. Falling is always downward, but targeted jumping must achieve many possible desired trajectories. We show that when making targeted jumps, juvenile wingless mantises first rotated their abdomen about the thorax to adjust the center of mass and thus regulate spin at takeoff. Once airborne, they then smoothly and sequentially transferred angular momentum in four stages between the jointed abdomen, the two raptorial front legs, and the two propulsive hind legs to produce a controlled jump with a precise landing. Experimentally impairing abdominal movements reduced the overall rotation so that the mantis either failed to grasp the target or crashed into it head first.GPS was supported by HFSP grant LT00422/2006-C. DAC was funded by a Leverhulme
Trust grant F/09 364/K to S.R. Ott, University of Leicester, whom we thank for his support.This is the accepted manuscript. The final version is available at http://www.cell.com/current-biology/abstract/S0960-9822%2815%2900086-X
The feasibility of using electromagnetic waves in determining the moisture content of building fabrics and the cause of the water ingress
In this paper, the feasibility of using electromagnetic (EM) waves is determining the moisture content of building fabrics and the case of water ingress in experimentally assessed. This paper will concentrate on investigating the propagation of EM waves through typical structures and their interaction with concealed pipework, wiring and timber. All current methods are overviewed and analysed. Novel microwave sensor described in this paper operates in 6 GHz to 12 GHz frequency range using Marconi 6200A microwave test set. Results of experimental test confirm that microwaves can be used as an alternative nondestructive method for identifying different object behind the walls
Safety and feasibility of early single-dose mitomycin C bladder instillation after robot-assisted radical nephroureterectomy
Objectives:
To assess the safety and feasibility of early singleâdose mitomycin C (MMC) bladder instillation after robotâassisted radical nephroureterectomy (RARNU) at a tertiary kidney cancer centre. RARNU with bladder cuff excision and subsequent MMC bladder instillation to reduce recurrence risk is the âgold standardâ for highârisk upper urinary tract urothelial carcinoma (UUTUC). We adapted a RARNU technique with precise distal ureteric dissection, bladder cuff excision and watertight bladder closure.
Patients and Methods:
We retrospectively reviewed all patients undergoing RARNU for UUTUC at our centre performed as a standardised transperitoneal procedure comprising of: bladder cuff excision, twoâlayer watertight closure and intraoperative bladder leak test; without reâdocking/reâpositioning of the robotic surgical system. Patient demographics, the timing of MMC instillation, adverse events (surgical and potentially MMCârelated) and length of stay (LOS) were assessed according to the ClavienâDindo classification.
Results:
A total of 69 patients underwent a RARNU with instillation of MMC. The median (interquartile range [IQR]) age was 70 (62â78) years. The median (IQR) day of MMC instillation was 2 (1â3) days and the median (IQR) LOS was 2 (2â4) days, with urethral catheter removal on day of discharge in all cases. Only Grade I ClavienâDindo complications occurred in seven patients (10%); five had ileus, one a wound infection and one a selfâlimiting delirium, all managed conservatively. No adverse events potentially related to MMC instillation were noted within 30 days postoperatively.
Conclusion:
The use of intravesical MMC instillation given in the immediate postoperative period appears feasible and safe in patients undergoing RARNU with intraoperative confirmation of a waterâtight closure ensuring early catheterâfree discharge, with no significant adverse events. The potential reduction in intravesical recurrence in patients receiving early MMC needs to be assessed with longitudinal followâup studies
The development of a new accountability measurement framework and tool for global health initiatives
The Global Strategy for Women's Children's and Adolescents' Health emphasizes accountability as essential to ensure that decision-makers have the information required to meet the health needs of their populations and stresses the importance of tracking resources, results, and rights to see 'what works, what needs improvement and what requires increased attention'. However, results from accountability initiatives are mixed and there is a lack of broadly applicable, validated tools for planning, monitoring and evaluating accountability interventions. This article documents an effort to transform accountability markers-including political will, leadership and the monitor-review-act cycle-into a measurement tool that can be used prospectively or retrospectively to plan, monitor and evaluate accountability initiatives. It describes the development process behind the tool including the literature review, framework development and subsequent building of the measurement tool itself. It also examines feedback on the tool from a panel of global experts and the results of a pilot test conducted in Bauchi and Gombe states in Nigeria. The results demonstrate that the tool is an effective aid for accountability initiatives to reflect on their own progress and provides a useful structure for future planning, monitoring and evaluation. The tool can be applied and adapted to other accountability mechanisms working in global health
Microwave sensors for in situ monitoring of trace metals in polluted water
Thousands of pollutants are threatening our water supply, putting at risk human and environmental health. Between them, trace metals are of significant concern, due to their high toxicity at low concentrations. Abandoned mining areas are globally one of the major sources of toxic metals. Nowadays, no method can guarantee an immediate response for quantifying these pollutants. In this work, a novel technique based on microwave spectroscopy and planar sensors for in situ real-time monitoring of water quality is described. The sensors were developed to directly probe water samples, and in situ trial measurements were performed in freshwater in four polluted mining areas in the UK. Planar microwave sensors were able to detect the water pollution level with an immediate response specifically depicted at three resonant peaks in the GHz range. To the authors' best knowledge, this is the first time that planar microwave sensors were tested in situ, demonstrating the ability to use this method for classifying more and less polluted water using a multiple-peak approach
- âŠ