Direct printing of 2-component silicones in facial & body prostheses

Traditionally maxillofacial prostheses are fabricated by hand carving the missing anatomical defect in wax, and creating a mould into which pigmented silicone elastomer is placed. Modern technologies have been used to manufacture anatomical face/body parts utilizing computed tomography (CT) data in conjunction with rapid prototyping (RP) techniques utilizing a hard plastic resin or thermoformed wax. However, these methods still require moulds into which a biocompatible pigmented silicone elastomer is placed. The purpose of this paper is to explore the development of direct printing of two component silicone elastomers in conjunction with a PVA support structure to create complex shapes using a customized 3D printer. A custom designed 3D printer with x- y-z gantry robot with an accuracy of 0.1µm was adapted with a custom designed printing head. Secondly, a two-component printable silicone elastomer was formulated that incorporated the desired characteristics and properties similar to those commercially available for the provision of facial and body prostheses. The silicone is composed of polydimethylsiloxane (PDMS) chains, filler, catalyst and cross-linker. Varying the amount of these components the mechanical properties of the silicone elastomer can be altered e.g. tensile strength, tear strength, hardness and wettability. To achieve these desired properties consideration must also be given to the set time and viscosity of the silicone elastomer and additionally the speed at which the material is printed. A thermal print head was used to deliver Polyvinyl acetate (PVA) to support the complex silicone shapes. Further development is needed to ensure appropriate digital colouring of the silicone elastomer to match the patients’ natural tissues. Ultimately, this would provide the maxillofacial prosthetist with a tool that manufactures prostheses reliably, with less emphasis placed on individual artistic interpretation. This technology has the potential to solve possible manufacturing solutions to complex shapes for both commercial and industry in addition to the current medical applications

Анализ и выбор методики оценки рисков отказов магистральных нефтепроводов

Объектом исследования является напряженно-деформированное состояние линейной части подземного нефтепровода. Цель работы – проанализировать методику оценки рисков отказов нефтепроводов, основанную на определении их напряженно-деформированного состояния, и применить ее к конкретному участку нефтепровода для повышения уровня надежности. В работе рассмотрены подходы к оценке конструктивной надежности нефтепровода и основные параметры, определяющие его напряженно-деформированное состояние. В результате работы проведен расчет напряженно-деформированного состояния подводного перехода участка 379-383 км трассы магистрального нефтепровода "Александровское – Анжеро-Судженск" и сделан вывод об уровне риска его отказа.The object of the research is the stress-strain state of the line section of the buried oil pipeline. The purpose of the work is to analyze the methodology for assessing the risks of oil pipeline failures based on the determination of their stress-strain state and use it to a specific section of oil pipeline to increase the level of reliability. The approaches to an estimation of constructive reliability of oil pipeline and the basic parameters defining its stress-strain state are considered in the work. As a result of the work, the stress-strain state of the underwater crossing of section 379-383 km of the route of the Alexandrovskoye-Anzhero-Sudzhensk main oil pipeline was calculated and a conclusion was made about the level of risk of its failure

The population of merging compact binaries inferred using gravitational waves through GWTC-3

We report on the population properties of 76 compact binary mergers detected with gravitational waves below a false alarm rate of 1 per year through GWTC-3. The catalog contains three classes of binary mergers: BBH, BNS, and NSBH mergers. We infer the BNS merger rate to be between 10 $\rm{Gpc^{-3} yr^{-1}}$ and 1700 $\rm{Gpc^{-3} yr^{-1}}$ and the NSBH merger rate to be between 7.8 $\rm{Gpc^{-3}\, yr^{-1}}$ and 140 $\rm{Gpc^{-3} yr^{-1}}$ , assuming a constant rate density versus comoving volume and taking the union of 90% credible intervals for methods used in this work. Accounting for the BBH merger rate to evolve with redshift, we find the BBH merger rate to be between 17.9 $\rm{Gpc^{-3}\, yr^{-1}}$ and 44 $\rm{Gpc^{-3}\, yr^{-1}}$ at a fiducial redshift (z=0.2). We obtain a broad neutron star mass distribution extending from $1.2^{+0.1}_{-0.2} M_\odot$ to $2.0^{+0.3}_{-0.3} M_\odot$. We can confidently identify a rapid decrease in merger rate versus component mass between neutron star-like masses and black-hole-like masses, but there is no evidence that the merger rate increases again before 10 $M_\odot$. We also find the BBH mass distribution has localized over- and under-densities relative to a power law distribution. While we continue to find the mass distribution of a binary's more massive component strongly decreases as a function of primary mass, we observe no evidence of a strongly suppressed merger rate above $\sim 60 M_\odot$. The rate of BBH mergers is observed to increase with redshift at a rate proportional to $(1+z)^{\kappa}$ with $\kappa = 2.9^{+1.7}_{-1.8}$ for $z\lesssim 1$. Observed black hole spins are small, with half of spin magnitudes below $\chi_i \simeq 0.25$. We observe evidence of negative aligned spins in the population, and an increase in spin magnitude for systems with more unequal mass ratio

Search for continuous gravitational wave emission from the Milky Way center in O3 LIGO--Virgo data

We present a directed search for continuous gravitational wave (CW) signals emitted by spinning neutron stars located in the inner parsecs of the Galactic Center (GC). Compelling evidence for the presence of a numerous population of neutron stars has been reported in the literature, turning this region into a very interesting place to look for CWs. In this search, data from the full O3 LIGO--Virgo run in the detector frequency band $[10,2000]\rm~Hz$ have been used. No significant detection was found and 95$\%$ confidence level upper limits on the signal strain amplitude were computed, over the full search band, with the deepest limit of about $7.6\times 10^{-26}$ at $\simeq 142\rm~Hz$. These results are significantly more constraining than those reported in previous searches. We use these limits to put constraints on the fiducial neutron star ellipticity and r-mode amplitude. These limits can be also translated into constraints in the black hole mass -- boson mass plane for a hypothetical population of boson clouds around spinning black holes located in the GC.Comment: 25 pages, 5 figure

Constraints on the cosmic expansion history from GWTC-3

We use 47 gravitational-wave sources from the Third LIGO-Virgo-KAGRA Gravitational-Wave Transient Catalog (GWTC-3) to estimate the Hubble parameter $H(z)$, including its current value, the Hubble constant $H_0$. Each gravitational-wave (GW) signal provides the luminosity distance to the source and we estimate the corresponding redshift using two methods: the redshifted masses and a galaxy catalog. Using the binary black hole (BBH) redshifted masses, we simultaneously infer the source mass distribution and $H(z)$. The source mass distribution displays a peak around $34\, {\rm M_\odot}$, followed by a drop-off. Assuming this mass scale does not evolve with redshift results in a $H(z)$ measurement, yielding $H_0=68^{+12}_{-7} {\rm km\,s^{-1}\,Mpc^{-1}}$ ($68\%$ credible interval) when combined with the $H_0$ measurement from GW170817 and its electromagnetic counterpart. This represents an improvement of 17% with respect to the $H_0$ estimate from GWTC-1. The second method associates each GW event with its probable host galaxy in the catalog GLADE+, statistically marginalizing over the redshifts of each event's potential hosts. Assuming a fixed BBH population, we estimate a value of $H_0=68^{+8}_{-6} {\rm km\,s^{-1}\,Mpc^{-1}}$ with the galaxy catalog method, an improvement of 42% with respect to our GWTC-1 result and 20% with respect to recent $H_0$ studies using GWTC-2 events. However, we show that this result is strongly impacted by assumptions about the BBH source mass distribution; the only event which is not strongly impacted by such assumptions (and is thus informative about $H_0$) is the well-localized event GW190814

Open Data from the Third Observing Run of LIGO, Virgo, KAGRA, and GEO

The global network of gravitational-wave observatories now includes five detectors, namely LIGO Hanford, LIGO Livingston, Virgo, KAGRA, and GEO 600. These detectors collected data during their third observing run, O3, composed of three phases: O3a starting in 2019 April and lasting six months, O3b starting in 2019 November and lasting five months, and O3GK starting in 2020 April and lasting two weeks. In this paper we describe these data and various other science products that can be freely accessed through the Gravitational Wave Open Science Center at https://gwosc.org. The main data set, consisting of the gravitational-wave strain time series that contains the astrophysical signals, is released together with supporting data useful for their analysis and documentation, tutorials, as well as analysis software packages

GWTC-2.1: Deep extended catalog of compact binary coalescences observed by LIGO and Virgo during the first half of the third observing run

The second Gravitational-Wave Transient Catalog, GWTC-2, reported on 39 compact binary coalescences observed by the Advanced LIGO and Advanced Virgo detectors between 1 April 2019 15 ∶ 00 UTC and 1 October 2019 15 ∶ 00 UTC. Here, we present GWTC-2.1, which reports on a deeper list of candidate events observed over the same period. We analyze the final version of the strain data over this period with improved calibration and better subtraction of excess noise, which has been publicly released. We employ three matched-filter search pipelines for candidate identification, and estimate the probability of astrophysical origin for each candidate event. While GWTC-2 used a false alarm rate threshold of 2 per year, we include in GWTC-2.1, 1201 candidates that pass a false alarm rate threshold of 2 per day. We calculate the source properties of a subset of 44 high-significance candidates that have a probability of astrophysical origin greater than 0.5. Of these candidates, 36 have been reported in GWTC-2. We also calculate updated source properties for all binary black hole events previously reported in GWTC-1. If the eight additional high-significance candidates presented here are astrophysical, the mass range of events that are unambiguously identified as binary black holes (both objects ≥ 3 M⊙ ) is increased compared to GWTC-2, with total masses from ∼ 14 M ⊙ for GW190924_021846 to ∼ 182 M⊙ for GW190426_190642. Source properties calculated using our default prior suggest that the primary components of two new candidate events (GW190403_051519 and GW190426_190642) fall in the mass gap predicted by pair-instability supernova theory. We also expand the population of binaries with significantly asymmetric mass ratios reported in GWTC-2 by an additional two events (the mass ratio is less than 0.65 and 0.44 at 90% probability for GW190403_051519 and GW190917_114630 respectively), and find that two of the eight new events have effective inspiral spins χeff > 0 (at 90% credibility), while no binary is consistent with χeff < 0 at the same significance. We provide updated estimates for rates of binary black hole and binary neutron star coalescence in the local Universe