1,306 research outputs found
Investigating interfacial electron transfer in dye-sensitized NiO using vibrational spectroscopy
Understanding what influences the formation and lifetime of charge-separated states is key to developing photoelectrochemical devices. This paper describes the use of time-resolved infrared absorption spectroscopy (TRIR) to determine the structure and lifetime of the intermediates formed on photoexcitation of two organic donor-π-acceptor dyes adsorbed to the surface of NiO. The donor and π-linker of both dyes is triphenylamine and thiophene but the acceptors differ, maleonitrile (1) and bodipy (2). Despite their structural similarities, dye 1 outperforms 2 significantly in devices. Strong transient bands in the fingerprint region (1 and 2) and nitrile region (2300-2000 cm–1) for 1 enabled us to monitor the structure of the excited states in solution or adsorbed on NiO (in the absence and presence of electrolyte) and the corresponding kinetics, which on a ps-ns timescale. The results are consistent with rapid (<1 ps) charge-transfer from NiO to the excited dye (1) to give exclusively the charge-separated state on the timescale of our measurements. Conversely, the TRIR experiments revealed that multiple species are present shortly after excitation of the bodipy chromophore in 2, which is electronically decoupled from the thiophene linker. In solution, excitation first populates the bodipy singlet excited state, followed by charge transfer from the triphenylamine to the bodipy. The presence and short lifetime (τ ≈ 30 ps) of the charge-transfer excited state when 2 is adsorbed on NiO (2|NiO) suggests that charge separation is slower and/or less efficient in 2|NiO than in 1|NiO. This is consistent with the difference in performance between the two dyes in dye-sensitized solar cells and photoelectrochemical water splitting devices. Compared to n-type materials such as TiO2, less is understood regarding electron transfer between dyes and p-type metal oxides such as NiO, but it is evident that fast charge-recombination presents a limit to the performance of photocathodes. This is also a major challenge to photocatalytic systems based on a “Z-scheme”, where the catalysis takes place on a μs-s timescale
Vibrational Relaxation and Redistribution Dynamics in Ruthenium(II) Polypyridyl-Based Charge-Transfer Excited States: A Combined Ultrafast Electronic and Infrared Absorption Study
Ultrafast time-resolved
electronic and infrared absorption measurements
have been carried out on a series of Ru(II) polypyridyl complexes
in an effort to delineate the dynamics of vibrational relaxation in
this class of charge transfer chromophores. Time-dependent density
functional theory calculations performed on compounds of the form
[Ru(CN-Me-bpy)x(bpy)3‑x]2+ (x = 1–3 for compounds 1–3, respectively, where CN-Me-bpy is
4,4′-dicyano-5,5′-dimethyl-2,2′-bipyridine and
bpy is 2,2′-bipyridine) reveal features in their charge-transfer
absorption envelopes that allow for selective excitation of the Ru(II)–(CN-Me-bpy)
moiety, the lowest-energy MLCT state(s) in each compound of the series.
Changes in band shape and amplitude of the time-resolved differential
electronic absorption data are ascribed to vibrational cooling in
the CN-Me-bpy-localized 3MLCT state with a time constant
of 8 ± 3 ps in all three compounds. This conclusion was corroborated
by picosecond time-resolved infrared absorption measurements; sharpening
of the CN stretch in the 3MLCT excited state was observed
with a time constant of 3.0 ± 1.5 ps in all three members of
the series. Electronic absorption data acquired at higher temporal
resolution revealed spectral modulation over the first 2 ps occurring
with a time constant of τ = 170 ± 50 fs, in compound 1; corresponding effects are significantly attenuated in compound 2 and virtually absent in compound 3. We assign
this feature to intramolecular vibrational redistribution (IVR) within
the 3MLCT state and represents a rare example of this process
being identified from time-resolved electronic absorption data for
this important class of chromophores
Clearance of human IgG1-sensitised red blood cells in vivo in humans relates to the in vitro properties of antibodies from alternative cell lines.
We previously produced a recombinant version of the human anti-RhD antibody Fog-1 in the rat myeloma cell line, YB2/0. When human, autologous RhD-positive red blood cells (RBC) were sensitised with this IgG1 antibody and re-injected, they were cleared much more rapidly from the circulation than had been seen earlier with the original human-mouse heterohybridoma-produced Fog-1. Since the IgG have the same amino acid sequence, this disparity is likely to be due to alternative glycosylation that results from the rat and mouse cell lines. By comparing the in vitro properties of YB2/0-produced Fog-1 IgG1 and the same antibody produced in the mouse myeloma cell line NS0, we now have a unique opportunity to pinpoint the cause of the difference in ability to clear RBC in vivo. Using transfected cell lines that express single human FcγR, we showed that IgG1 made in YB2/0 and NS0 cell lines bound equally well to receptors of the FcγRI and FcγRII classes but that the YB2/0 antibody was superior in FcγRIII binding. When measuring complexed IgG binding, the difference was 45-fold for FcγRIIIa 158F, 20-fold for FcγRIIIa 158V and approximately 40-fold for FcγRIIIb. The dissimilarity was greater at 100-fold in monomeric IgG binding assays with FcγRIIIa. When used to sensitise RBC, the YB2/0 IgG1 generated 100-fold greater human NK cell antibody-dependent cell-mediated cytotoxicity and had a 103-fold advantage over the NS0 antibody in activating NK cells, as detected by CD54 levels. In assays of monocyte activation and macrophage adherence/phagocytosis, where FcγRI plays major roles, RBC sensitised with the two antibodies produced much more similar results. Thus, the alternative glycosylation profiles of the Fog-1 antibodies affect only FcγRIII binding and FcγRIII-mediated functions. Relating this to the in vivo studies confirms the importance of FcγRIII in RBC clearance.The work was supported by funding from the Department of Pathology, University of Cambridge through income that was derived from commercial exploitation of patented antibodies. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.This is the final published version. It first appeared at http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0109463
Survivin gene silencing sensitizes prostate cancer cells to selenium growth inhibition
<p>Abstract</p> <p>Background</p> <p>Prostate cancer is a leading cause of cancer-related death in men worldwide. Survivin is a member of the inhibitor of apoptosis (IAP) protein family that is expressed in the majority of human tumors including prostate cancer, but is barely detectable in terminally differentiated normal cells. Downregulation of survivin could sensitize prostate cancer cells to chemotherapeutic agents <it>in vitro </it>and <it>in vivo</it>. Selenium is an essential trace element. Several studies have shown that selenium compounds inhibit the growth of prostate cancer cells. The objective of this study is to investigate whether survivin gene silencing in conjunction with selenium treatment could enhance the therapeutic efficacy for prostate cancer and to elucidate the underlying mechanisms.</p> <p>Methods</p> <p>Expression of survivin was analyzed in a collection of normal and malignant prostatic tissues by immunohistochemical staining. <it>In vitro </it>studies were conducted in PC-3M, C4-2B, and 22Rv1 prostate cancer cells. The effect of selenium on survivin expression was analyzed by Western blotting and semi-quantitative RT-PCR. Survivin gene knockdown was carried out by transfecting cells with a short hairpin RNA (shRNA) designed against survivin. Cell proliferation was quantitated by the 3-(4,5-Dimethylthiazol-2-yl)- 2,5-Diphenyltetrazolium Bromide (MTT) assay and apoptosis by propidium iodide staining followed by flow cytometry analysis. Finally, <it>in vivo </it>tumor growth assay was performed by establishing PC-3M xenograft in nude mice and monitoring tumor growth following transfection and treatment.</p> <p>Results</p> <p>We found that survivin was undetectable in normal prostatic tissues but was highly expressed in prostate cancers. Survivin knockdown or selenium treatment inhibited the growth of prostate cancer cells, but the selenium effect was modest. In contrast to what have been observed in other cell lines, selenium treatment had little or no effect on survivin expression in several androgen-independent prostate cancer cell lines. Survivin knockdown sensitized these cells to selenium growth inhibition and apoptosis induction. In nude mice bearing PC-3M xenografts, survivin knockdown synergizes with selenium in inhibiting tumor growth.</p> <p>Conclusions</p> <p>Selenium could inhibit the growth of hormone-refractory prostate cancer cells both <it>in vitro </it>and <it>in vivo</it>, but the effects were modest. The growth inhibition was not mediated by downregulating survivin expression. Survivin silencing greatly enhanced the growth inhibitory effects of selenium.</p
Comparison of measured and declared vitamin D concentrations in Australian fortified foods
Fortified foods are an important source of dietary vitamin D, since this nutrient occurs naturally in relatively low concentrations in a limited number of foods. Hence, we aimed to investigate the accuracy of the declared vitamin D content of Australian fortified foods. Vitamin D3, 25-hydroxyvitamin D3 (25(OH)D3), vitamin D2 and 25(OH)D2 were measured in 30 fortified food samples (edible oil spreads, malted chocolate drink powders, soy milks and breakfast cereals) using liquid chromatography with triple quadrupole mass spectrometry. The measured vitamin D content ranged from − 54 % to + 190 % of declared values. One product had measured vitamin D content close to the declared value, while 10 of 14 products had vitamin D in excess of that declared. Label information proved an unreliable indicator of measured vitamin D content across all product categories, which may be problematic for those relying on fortified foods as their main source of vitamin D
Schottky barrier height at metal/ZnO interface: A first-principles study
The Schottky barrier heights (SBHs) of various metals on ZnO are investigated by first-principles calculation. The SBHs decrease linearly with increasing metal work function, which follows the prediction of the metal-induced gap states (MIGS) model. The pinning factor S is calculated to be 0.56 which indicates moderate pinning effect. A closer look at the interfacial electronic structure shows the dominant rule of oxygen in forming the MIGS. To extend the concept of MIGS model to the band alignment between semiconductors, a calculation is performed on Si/ZnO interface. Si is found to have a type-II band alignment with ZnO, the conduction band offset (CBO) and valence band offset (VBO) are calculated to be 0.5 eV and 2.5 eV respectively. The results agree with the experimental values and the predicted values based on the charge neutrality level (CNL) method
Uncovering the Early Stages of Domain Melting in Calmodulin With Ultrafast Temperature-Jump Infrared Spectroscopy
The signaling protein calmodulin (CaM) undergoes a well-known change in secondary structure upon binding Ca2+, but the structural plasticity of the Ca2+-free apo state is linked to CaM functionality. Variable temperature studies of apo-CaM indicate two structural transitions at 46 and 58 °C that are assigned to melting of the C- and N-terminal domains, respectively, but the molecular mechanism of domain unfolding is unknown. We report temperature-jump time-resolved infrared (IR) spectroscopy experiments designed to target the first steps in the C-terminal domain melting transition of human apo-CaM. A comparison of the nonequilibrium relaxation of apo-CaM with the more thermodynamically stable holo-CaM, with 4 equiv of Ca2+ bound, shows that domain melting of apo-CaM begins on microsecond time scales with α-helix destabilization. These observations enable the assignment of previously reported dynamics of CaM on hundreds of microsecond time scales to thermally activated melting, producing a complete mechanism for thermal unfolding of CaM
Uncovering the Early Stages of Domain Melting in Calmodulin With Ultrafast Temperature-Jump Infrared Spectroscopy
The signaling protein calmodulin (CaM) undergoes a well-known change in secondary structure upon binding Ca2+, but the structural plasticity of the Ca2+-free apo state is linked to CaM functionality. Variable temperature studies of apo-CaM indicate two structural transitions at 46 and 58 °C that are assigned to melting of the C- and N-terminal domains, respectively, but the molecular mechanism of domain unfolding is unknown. We report temperature-jump time-resolved infrared (IR) spectroscopy experiments designed to target the first steps in the C-terminal domain melting transition of human apo-CaM. A comparison of the nonequilibrium relaxation of apo-CaM with the more thermodynamically stable holo-CaM, with 4 equiv of Ca2+ bound, shows that domain melting of apo-CaM begins on microsecond time scales with α-helix destabilization. These observations enable the assignment of previously reported dynamics of CaM on hundreds of microsecond time scales to thermally activated melting, producing a complete mechanism for thermal unfolding of CaM
Recommended from our members
The influence of the atmospheric boundary layer on nocturnal layers of noctuids and other moths migrating over southern Britain
Insects migrating at high altitude over southern Britain have been continuously monitored by automatically-operating, vertical-looking radars over a period of several years. During some occasions in the summer months, the migrants were observed to form well-defined layer concentrations, typically at heights of 200-400 m, in the stable night-time atmosphere. Under these conditions, insects are likely to have control over their vertical movements and are selecting flight heights which are favourable for long-range migration. We therefore investigated the factors influencing the formation of these insect layers by comparing radar measurements of the vertical distribution of insect density with meteorological profiles generated by the UK Met. Office’s Unified Model (UM). Radar-derived measurements of mass and displacement speed, along with data from Rothamsted Insect Survey light traps provided information on the identity of the migrants. We present here three case studies where noctuid and pyralid moths contributed substantially to the observed layers. The major meteorological factors influencing the layer concentrations appeared to be: (a) the altitude of the warmest air, (b) heights corresponding to temperature preferences or thresholds for sustained migration and (c), on nights when air temperatures are relatively high, wind-speed maxima associated with the nocturnal jet. Back-trajectories indicated that layer duration may have been determined by the distance to the coast. Overall, the unique combination of meteorological data from the UM and insect data from entomological radar described here show considerable promise for systematic studies of high-altitude insect layering
- …