High-energy-low-temperature technologies for the synthesis of nanoparticles: Microwaves and high pressure

Microwave Solvothermal Synthesis (MSS) is a chemical technology, where apart from possible effects of microwaves on the chemical reaction paths, microwave heating allows the precise planning of a time-temperature schedule, as well as to achieve high super-saturation of the reagents uniformly in the reactor vessel. Thus, MSS is suitable for production of nanoparticles with small grain size distribution and a high degree of crystallinity. A further advantage of the technology is a much lower synthesis temperature than for gas phase, plasma or sol-gel technologies. New reactors have been developed to exploit these advantages of the MSS technology of nanoparticles synthesis and to scale up the production rate. Reactor design and realization has been shown to be decisive and critical for the control of the MSS technology. Examples of oxidic and phosphatic nanoparticles synthesis have been reported

Effect of Pressure on Synthesis of Pr-Doped Zirconia Powders Produced by Microwave-Driven Hydrothermal Reaction

A high-pressure microwave reactor was used to study the hydrothermal synthesis of zirconia powders doped with 1 mol % Pr. The synthesis was performed in the pressure range from 2 to 8 MPa corresponding to a temperature range from 215C∘ to 305C∘. This technology permits a synthesis of nanopowders in short time not limited by thermal inertia of the vessel. Microwave heating permits to avoid contact of the reactants with heating elements, and is thus particularly well suited for synthesis of doped nanopowders in high purity conditions. A mixture of ZrO2 particles with tetragonal and monoclinic crystalline phases, about 15 nm in size, was obtained. The p/T threshold of about 5-6 MPa/265–280C∘ was necessary to obtain good quality of zirconia powder. A new method for quantitative description of grain-size distribution was applied, which is based on analysis of the fine structure of the X-ray diffraction line profiles. It permitted to follow separately the effect of synthesis conditions on the grain-size distribution of the monoclinic and tetragonal phases

Effect of pressure on synthesis of Pr-doped zirconia powders produced by microwave-driven hydrothermal reaction

A high-pressure microwave reactor was used to study the hydrothermal synthesis of zirconia powders doped with 1 mol % Pr.The synthesis was performed in the pressure range from 2 to 8MPa corresponding to a temperature range from 215◦C to 305◦C.This technology permits a synthesis of nanopowders in short time not limited by thermal inertia of the vessel. Microwave heatingpermits to avoid contact of the reactants with heating elements, and is thus particularly well suited for synthesis of dopednanopowders in high purity conditions. A mixture of ZrO2 particles with tetragonal and monoclinic crystalline phases, about15nm in size, was obtained. The p/T threshold of about 5-6MPa/265–280◦C was necessary to obtain good quality of zirconiapowder. A new method for quantitative description of grain-size distribution was applied, which is based on analysis of the finestructure of the X-ray diffraction line profiles. It permitted to follow separately the effect of synthesis conditions on the grain-size distribution of the monoclinic and tetragonal phases

Spectroscopy of 18^{18}Na: Bridging the two-proton radioactivity of 19^{19}Mg

The unbound nucleus $^{18}$Na, the intermediate nucleus in the two-proton radioactivity of $^{19}$Mg, was studied by the measurement of the resonant elastic scattering reaction $^{17}$Ne(p,$^{17}$Ne)p performed at 4 A.MeV. Spectroscopic properties of the low-lying states were obtained in a R-matrix analysis of the excitation function. Using these new results, we show that the lifetime of the $^{19}$Mg radioactivity can be understood assuming a sequential emission of two protons via low energy tails of $^{18}$Na resonances

Determination of the b quark mass at the M_Z scale with the DELPHI detector at LEP

An experimental study of the normalized three-jet rate of b quark events with respect to light quarks events (light= \ell \equiv u,d,s) has been performed using the CAMBRIDGE and DURHAM jet algorithms. The data used were collected by the DELPHI experiment at LEP on the Z peak from 1994 to 2000. The results are found to agree with theoretical predictions treating mass corrections at next-to-leading order. Measurements of the b quark mass have also been performed for both the b pole mass: M_b and the b running mass: m_b(M_Z). Data are found to be better described when using the running mass. The measurement yields: m_b(M_Z) = 2.85 +/- 0.18 (stat) +/- 0.13 (exp) +/- 0.19 (had) +/- 0.12 (theo) GeV/c^2 for the CAMBRIDGE algorithm. This result is the most precise measurement of the b mass derived from a high energy process. When compared to other b mass determinations by experiments at lower energy scales, this value agrees with the prediction of Quantum Chromodynamics for the energy evolution of the running mass. The mass measurement is equivalent to a test of the flavour independence of the strong coupling constant with an accuracy of 7 permil.Comment: 24 pages, 10 figures, Accepted by Eur. Phys. J.

Measurement and Interpretation of Fermion-Pair Production at LEP energies above the Z Resonance

This paper presents DELPHI measurements and interpretations of cross-sections, forward-backward asymmetries, and angular distributions, for the e+e- -> ffbar process for centre-of-mass energies above the Z resonance, from sqrt(s) ~ 130 - 207 GeV at the LEP collider. The measurements are consistent with the predictions of the Standard Model and are used to study a variety of models including the S-Matrix ansatz for e+e- -> ffbar scattering and several models which include physics beyond the Standard Model: the exchange of Z' bosons, contact interactions between fermions, the exchange of gravitons in large extra dimensions and the exchange of sneutrino in R-parity violating supersymmetry.Comment: 79 pages, 16 figures, Accepted by Eur. Phys. J.

A Determination of the Centre-of-Mass Energy at LEP2 using Radiative 2-fermion Events

Using e+e- -> mu+mu-(gamma) and e+e- -> qqbar(gamma) events radiative to the Z pole, DELPHI has determined the centre-of-mass energy, sqrt{s}, using energy and momentum constraint methods. The results are expressed as deviations from the nominal LEP centre-of-mass energy, measured using other techniques. The results are found to be compatible with the LEP Energy Working Group estimates for a combination of the 1997 to 2000 data sets.Comment: 20 pages, 6 figures, Accepted by Eur. Phys. J.

Study of Tau-pair Production in Photon-Photon Collisions at LEP and Limits on the Anomalous Electromagnetic Moments of the Tau Lepton

Tau-pair production in the process e+e- -> e+e-tau+tau- was studied using data collected by the DELPHI experiment at LEP2 during the years 1997 - 2000. The corresponding integrated luminosity is 650 pb^{-1}. The values of the cross-section obtained are found to be in agreement with QED predictions. Limits on the anomalous magnetic and electric dipole moments of the tau lepton are deduced.Comment: 20 pages, 9 figures, Accepted by Eur. Phys. J.

A Measurement of the Tau Hadronic Branching Ratios

The exclusive and semi-exclusive branching ratios of the tau lepton hadronic decay modes (h- v_t, h- pi0 v_t, h- pi0 pi0 v_t, h- \geq 2pi0 v_t, h- \geq 3pi0 v_t, 2h- h+ v_t, 2h- h+ pi0 v_t, 2h- h+ \geq 2pi0 v_t, 3h- 2h+ v_t and 3h- 2h+ \geq 1pi0 v_t) were measured with data from the DELPHI detector at LEP.Comment: 53 pages, 18 figures, Accepted by Eur. Phys. J.