Superconductivity in charge Kondo systems

We present a theory of superconductivity in charge Kondo systems, materials with resonant quantum valence fluctuations, in the regime where the transition temperature is comparable to the charge Kondo resonance. We find superconductivity induced by charge Kondo impurities, study how pairing of a superconducting host is enhanced due to charge Kondo centers and investigate the interplay between Kondo-scattering and inter-impurity Josephson coupling. We discuss the implications of our theory for Tl-doped PbTe, which has recently been identified as a candidate charge Kondo system.Comment: 4 pages, 4 figures; revised version; detailed discussion on the physics of Tl-doped PbTe adde

Электрохимическая переработка активной массы отработанных марганцево-цинковых химических источников тока

In order to process primary manganese-zinc chemical current sources, the technology for processing and separation of active mass components is optimized. The technology involves the extraction of zinc in the form of powder and in the form of coatings. Manganese compounds will be extracted in the form of manganese dioxide, while reducing the hazard class of waste to the fourth. The quantitative and qualitative composition of the electrolyte after leaching was determined by titrometric method. The highest concentration in the leaching electrolyte was observed for zinc Zn2+ and manganese Mn2+ ions, their concentrations were 34 and 41.36 g/dm3, respectively. Fe2+ iron ions were present in small amounts in the solutions. Using electrolytic processing of acid and alkaline solutions by leaching the active mass of spent manganese-zinc current sources, zinc in the form of coating was extracted.С целью переработки первичных марганцево-цинковых химических источников тока является оптимизация технологии по переработке и разделению компонентов активной массы. Технология предполагает извлечение цинка в виде порошка, так и в виде покрытий. Соединения марганца будут извлекаться в виде диоксида марганца, при этом предполагается уменьшение класса опасности отходов до четвертого. Определен количественный и качественный состав электролита после выщелачивания титрометрическим методом. Наибольшая концентрация в электролите выщелачивания наблюдалась по ионам цинка Zn2+ и марганца Mn2 их концентрация составила 34 и 41,36 г/дм3 соответственно. В небольших количествах в растворах присутствовали ионы железа Fe2+. Путем электролитической переработки кислотного и щелочного растворов выщелачивания активной массы отработанных марганцево-цинковых источников тока извлекли цинк в виде покрытия

Effect of Nanoparticle Size on the Morphology of Adsorbed Surfactant Layers

The surface aggregates structure of dimethyldodecylamine-N-oxide (C12DAO) in three silica dispersions of different particle sizes (16 - 42 nm) was studied by small-angle neutron scattering (SANS) in a H2O/D2O solvent mixture matching the silica. At the experimental conditions (pH 9) the surfactant exists in its nonionic form and the structure of the adsorbed layer is not affected by added electrolyte. It is found that C12DAO forms spherical surface micelles of 2 nm diameter on the 16 nm silica particles, but oblate ellipsoidal surface micelles are formed on the 27 and 42 nm particles. The dimensions of these oblate surface aggregates (minor and major semi-axes Rn and Rlat) are similar to those of C12DAO micelles in the aqueous solutions. It is concluded that the morphological transition from spherical to ellipsoidal surface aggregates is induced by the surface curvature of the silica particles. A comparison of the shape and dimensions of the surface aggregates formed by C12DAO and C12E5 on the 16 nm silica particles demonstrates that the nature of the surfactant head group does not determine the morphology of the surface aggregates, but has a strong influence on the number of surface aggregates per particle, due to the different interactions of the head groups with the silica surface

Charge Kondo Effect in Thermoelectric Properties of Lead Telluride doped with Thallium Impurities

We investigate the thermoelectric properties of PbTe doped with a small concentration $x$ of Tl impurities acting as acceptors and described by Anderson impurities with negative on-site (effective) interaction. The resulting charge Kondo effect naturally accounts for a number of the low temperature anomalies in this system, including the unusual doping dependence of the carrier concentration, the Fermi level pinning and the self-compensation effect. The Kondo anomalies in the low temperature resistivity at temperatures $T\leq 10\, {\rm K}$ and the $x$-dependence of the residual resistivity are also in good agreement with experiment. Our model also captures the qualitative aspects of the thermopower at higher temperatures $T>300\, {\rm K}$ for high dopings ($x>0.6$) where transport is expected to be largely dominated by carriers in the heavy hole band of PbTe.Comment: chapter contributed to 'New Materials for Thermoelectric Applications: Theory and Experiment' Springer Series: NATO Science for Peace and Security Series - B: Physics and Biophysics, pp. 67-80, ed. Veljko Zlati\'c, and Alex Hewson (Editor). ISBN: 978-94-007-4983-2 (2013

Analysis of Microcrafters in Materials Specimens after Long-Term Exposure on ISS Surface

The "Komplast" experiment has been carried out on the ISS by the Khrunichev Space Center jointly with other Russian scientific centers since 1998. The experiment incorporates the "Komplast" cartridges on the FGB exterior, which are fitted with materials specimens and sensors. The cartridges were sent into orbit together with FGB on 20 November 1998. In March 2011, two of the cartridges were taken back from the ISS by the "Discovery" American space shuttle after being exposed in the open space for 12 years. In the framework of this experiment the subject of analysis is the effect of the space environment on the exposed specimens of various materials. This report covers the analysis results of the surface morphology of various materials taken from the "Komplast" cartridges exposed to hits of micrometeors and micronic particles of space debris. Analysis is made of microcraters of 5 to 250 mcm in specimens of polished metals and silicone comprised in the sensor for micrometeoric particles. The report represents optic and scanning electron microscope images of craters formed in the specimens by high-velocity and low-velocity particles impacting the surface. By virtue of the electronic microscope, data on composition of the substance in the craters and of the substance of the low-velocity particles are obtained. The data make it possible to differentiate the particles as the natural-origin particles or anthropogenic-origin space debris particles. Distribution of craters and low-velocity particles in the size range of 5 to 50 mcm is obtained. The data are compared with the existing models of fluxes of natural-origin and artificial-origin microparticles on the ISS orbit. Inhomogeneous particles of complicated configuration are discovered on the surface of the analyzed specimens, whose origin are not uniquely determined and are to be the subject of further study

A Study of Micro Craters in Material Samples after Long Duration Exposure on ISS Komplast Panels

The Komplast materials experiment was designed by the Khrunichev State Research and Production Space Center, together with other Russian scientific institutes, and has been carried out by Mission Control Moscow since 1998. Komplast panels fitted with material samples and sensors were located on the International Space Station (ISS) Functional Cargo Block (FGB) module exterior surface. Within the framework of this experiment, the purpose was to study the effect of the low earth orbit (LEO) environment on exposed samples of various materials. The panels were sent into orbit with the FGB when it launched on November 20, 1998.

Tuning Curvature and Stability of Monoolein Bilayers by Designer Lipid-Like Peptide Surfactants

This study reports the effect of loading four different charged designer lipid-like short anionic and cationic peptide surfactants on the fully hydrated monoolein (MO)-based Pn3m phase (Q224). The studied peptide surfactants comprise seven amino acid residues, namely A6D, DA6, A6K, and KA6. D (aspartic acid) bears two negative charges, K (lysine) bears one positive charge, and A (alanine) constitutes the hydrophobic tail. To elucidate the impact of these peptide surfactants, the ternary MO/peptide/water system has been investigated using small-angle X-ray scattering (SAXS), within a certain range of peptide concentrations (R≤0.2) and temperatures (25 to 70°C). We demonstrate that the bilayer curvature and the stability are modulated by: i) the peptide/lipid molar ratio, ii) the peptide molecular structure (the degree of hydrophobicity, the type of the hydrophilic amino acid, and the headgroup location), and iii) the temperature. The anionic peptide surfactants, A6D and DA6, exhibit the strongest surface activity. At low peptide concentrations (R = 0.01), the Pn3m structure is still preserved, but its lattice increases due to the strong electrostatic repulsion between the negatively charged peptide molecules, which are incorporated into the interface. This means that the anionic peptides have the effect of enlarging the water channels and thus they serve to enhance the accommodation of positively charged water-soluble active molecules in the Pn3m phase. At higher peptide concentration (R = 0.10), the lipid bilayers are destabilized and the structural transition from the Pn3m to the inverted hexagonal phase (H2) is induced. For the cationic peptides, our study illustrates how even minor modifications, such as changing the location of the headgroup (A6K vs. KA6), affects significantly the peptide's effectiveness. Only KA6 displays a propensity to promote the formation of H2, which suggests that KA6 molecules have a higher degree of incorporation in the interface than those of A6K

Hsp20 Functions as a Novel Cardiokine in Promoting Angiogenesis via Activation of VEGFR2

Heat shock proteins (Hsps) are well appreciated as intrinsic protectors of cardiomyocytes against numerous stresses. Recent studies have indicated that Hsp20 (HspB6), a small heat shock protein, was increased in blood from cardiomyopathic hamsters. However, the exact source of the increased circulating Hsp20 and its potential role remain obscure. In this study, we observed that the circulating Hsp20 was increased in a transgenic mouse model with cardiac-specific overexpression of Hsp20, compared with wild-type mice, suggesting its origin from cardiomyocytes. Consistently, culture media harvested from Hsp20-overexpressing cardiomyocytes by Ad.Hsp20 infection contained an increased amount of Hsp20, compared to control media. Furthermore, we identified that Hsp20 was secreted through exosomes, independent of the endoplasmic reticulum-Golgi pathway. To investigate whether extracellular Hsp20 promotes angiogenesis, we treated human umbilical vein endothelial cells (HUVECs) with recombinant human Hsp20 protein, and observed that Hsp20 dose-dependently promoted HUVEC proliferation, migration and tube formation. Moreover, a protein binding assay and immunostaining revealed an interaction between Hsp20 and VEGFR2. Accordingly, stimulatory effects of Hsp20 on HUVECs were blocked by a VEGFR2 neutralizing antibody and CBO-P11 (a VEGFR inhibitor). These in vitro data are consistent with the in vivo findings that capillary density was significantly enhanced in Hsp20-overexpressing hearts, compared to non-transgenic hearts. Collectively, our findings demonstrate that Hsp20 serves as a novel cardiokine in regulating myocardial angiogenesis through activation of the VEGFR signaling cascade

Calcium Triggered Lα-H2 Phase Transition Monitored by Combined Rapid Mixing and Time-Resolved Synchrotron SAXS

BACKGROUND: Awad et al. reported on the Ca(2+)-induced transitions of dioleoyl-phosphatidylglycerol (DOPG)/monoolein (MO) vesicles to bicontinuous cubic phases at equilibrium conditions. In the present study, the combination of rapid mixing and time-resolved synchrotron small-angle X-ray scattering (SAXS) was applied for the in-situ investigations of fast structural transitions of diluted DOPG/MO vesicles into well-ordered nanostructures by the addition of low concentrated Ca(2+) solutions. METHODOLOGY/PRINCIPAL FINDINGS: Under static conditions and the in absence of the divalent cations, the DOPG/MO system forms large vesicles composed of weakly correlated bilayers with a d-spacing of approximately 140 A (L(alpha)-phase). The utilization of a stopped-flow apparatus allowed mixing these DOPG/MO vesicles with a solution of Ca(2+) ions within 10 milliseconds (ms). In such a way the dynamics of negatively charged PG to divalent cation interactions, and the kinetics of the induced structural transitions were studied. Ca(2+) ions have a very strong impact on the lipidic nanostructures. Intriguingly, already at low salt concentrations (DOPG/Ca(2+)>2), Ca(2+) ions trigger the transformation from bilayers to monolayer nanotubes (inverted hexagonal phase, H(2)). Our results reveal that a binding ratio of 1 Ca(2+) per 8 DOPG is sufficient for the formation of the H(2) phase. At 50 degrees C a direct transition from the vesicles to the H(2) phase was observed, whereas at ambient temperature (20 degrees C) a short lived intermediate phase (possibly the cubic Pn3m phase) coexisting with the H(2) phase was detected. CONCLUSIONS/SIGNIFICANCE: The strong binding of the divalent cations to the negatively charged DOPG molecules enhances the negative spontaneous curvature of the monolayers and causes a rapid collapsing of the vesicles. The rapid loss of the bilayer stability and the reorganization of the lipid molecules within ms support the argument that the transition mechanism is based on a leaky fusion of the vesicles