Experimental study of CO2 solubility in high concentration MEA solution for intensified solvent-based carbon capture

The solvent-based carbon capture process is the most matured and economical route for decarbonizing the power sector. In this process, aqueous monoethanolamine (MEA) is commonly used as the solvent for CO2 scrubbing from power plant and industrial flue gases. Generally, aqueous MEA with 30 wt% (or less) concentration is considered the benchmark solvent. The CO2 solubility data in aqueous MEA solution, used for modelling of the vapour-liquid equilibria (VLE) of CO2 in MEA solutions, are widely published for 30 wt% (or less) concentration. Aqueous MEA with higher concentrations (from 40 to 100 wt%) is considered in solvent-based carbon capture designs with techniques involving process intensification (PI). PI techniques could improve the process economics and operability of solvent-based carbon capture. Developing PI for application in capture process requires CO2 solubility data for concentrated MEA solutions. These data are however limited in literature. The modelling of the vapour-liquid equilibria (VLE) of CO2 in MEA solutions for PI-based solvent capture techniques involving stronger MEA solution of about 80 wt% concentration requires solubility data at the concentration. In this study, the data for 80 wt% MEA is presented for 40,60, 100 and 120oC. The experimental technique and analytical procedure in this study were validated by comparing the measurements for 30 wt% MEA with data from the literature. The data from this study can be fitted to VLE models such as electrolyte NRTL, extended UNIQUAC etc. which is an important component of solvent-based capture model using MEA as the solvent. More accurate VLE models will improve the prediction accuracy of capture level, rich loading etc. using PI-based solvent-based capture model

Process modelling, validation and analysis of rotating packed bed stripper in the context of intensified CO2 capture with MEA

Rotating packed bed (RPB) system has applications in CO2 removal using chemical solvents which can reduce the size about ten times compared to common packed bed (PB) system. In this study, RPB stripper using monoethanolamine (MEA) solution is modelled in gPROMS® software. The model has been validated using experimental data from literature and show good agreement. In addition to stripper modelling and validation, the process analysis is accomplished in this study by assessing the influence of four parameters namely rotor speed, reboiler temperature, flow rate of rich liquid, and pressure on desorption efficiency and desorption energy

Measurement of the nuclear modification factor for muons from charm and bottom hadrons in Pb+Pb collisions at 5.02 TeV with the ATLAS detector

Heavy-flavour hadron production provides information about the transport properties and microscopic structure of the quark-gluon plasma created in ultra-relativistic heavy-ion collisions. A measurement of the muons from semileptonic decays of charm and bottom hadrons produced in Pb+Pb and pp collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV with the ATLAS detector at the Large Hadron Collider is presented. The Pb+Pb data were collected in 2015 and 2018 with sampled integrated luminosities of 208 mu b(-1) and 38 mu b(-1), respectively, and pp data with a sampled integrated luminosity of 1.17 pb(-1) were collected in 2017. Muons from heavy-flavour semileptonic decays are separated from the light-flavour hadronic background using the momentum imbalance between the inner detector and muon spectrometer measurements, and muons originating from charm and bottom decays are further separated via the muon track's transverse impact parameter. Differential yields in Pb+Pb collisions and differential cross sections in pp collisions for such muons are measured as a function of muon transverse momentum from 4 GeV to 30 GeV in the absolute pseudorapidity interval vertical bar eta vertical bar < 2. Nuclear modification factors for charm and bottom muons are presented as a function of muon transverse momentum in intervals of Pb+Pb collision centrality. The bottom muon results are the most precise measurement of b quark nuclear modification at low transverse momentum where reconstruction of B hadrons is challenging. The measured nuclear modification factors quantify a significant suppression of the yields of muons from decays of charm and bottom hadrons, with stronger effects for muons from charm hadron decays

A search for an unexpected asymmetry in the production of e+μ− and e−μ+ pairs in proton-proton collisions recorded by the ATLAS detector at root s = 13 TeV

This search, a type not previously performed at ATLAS, uses a comparison of the production cross sections for e(+)mu(-) and e(-)mu(+) pairs to constrain physics processes beyond the Standard Model. It uses 139 fb(-1) of proton-proton collision data recorded at root s = 13 TeV at the LHC. Targeting sources of new physics which prefer final states containing e(+)mu(-) and e(-)mu(+), the search contains two broad signal regions which are used to provide model-independent constraints on the ratio of cross sections at the 2% level. The search also has two special selections targeting supersymmetric models and leptoquark signatures. Observations using one of these selections are able to exclude, at 95% confidence level, singly produced smuons with masses up to 640 GeV in a model in which the only other light sparticle is a neutralino when the R-parity-violating coupling lambda(23)(1)' is close to unity. Observations using the other selection exclude scalar leptoquarks with masses below 1880 GeV when g(1R)(eu) = g(1R)(mu c) = 1, at 95% confidence level. The limit on the coupling reduces to g(1R)(eu) = g(1R)(mu c) = 0.46 for a mass of 1420 GeV

Experimental study of CO

The solvent-based carbon capture process is the most matured and economical route for decarbonizing the power sector. In this process, aqueous monoethanolamine (MEA) is commonly used as the solvent for CO2 scrubbing from power plant and industrial flue gases. Generally, aqueous MEA with 30 wt% (or less) concentration is considered the benchmark solvent. The CO2 solubility data in aqueous MEA solution, used for modelling of the vapour-liquid equilibria (VLE) of CO2 in MEA solutions, are widely published for 30 wt% (or less) concentration. Aqueous MEA with higher concentrations (from 40 to 100 wt%) is considered in solvent-based carbon capture designs with techniques involving process intensification (PI). PI techniques could improve the process economics and operability of solvent-based carbon capture. Developing PI for application in capture process requires CO2 solubility data for concentrated MEA solutions. These data are however limited in literature. The modelling of the vapour-liquid equilibria (VLE) of CO2 in MEA solutions for PI-based solvent capture techniques involving stronger MEA solution of about 80 wt% concentration requires solubility data at the concentration. In this study, the data for 80 wt% MEA is presented for 40,60, 100 and 120oC. The experimental technique and analytical procedure in this study were validated by comparing the measurements for 30 wt% MEA with data from the literature. The data from this study can be fitted to VLE models such as electrolyte NRTL, extended UNIQUAC etc. which is an important component of solvent-based capture model using MEA as the solvent. More accurate VLE models will improve the prediction accuracy of capture level, rich loading etc. using PI-based solvent-based capture model

Validation of the Malay Version of Mini-IPIP among Substance Use Disorder Patients Attending Methadone Clinics in Malaysia

There has been an increasing interest in personality study over the years. This has led to the necessity for personality measures with good psychometric properties. However, good personality measures are usually too cumbersome to apply in real practical settings due to their length. This study aims to validate a commonly used short personality measure of the Big Five model, i.e., Mini-IPIP (Mini International Personality Item Pool), which has never been validated and used in the substance abuse population in the local setting. The participants were 239 individuals attending one of the six methadone clinics in Malaysia. Structural analysis was conducted using confirmatory factor analysis. Results showed a good model fit for Mini-IPIP when item-parcelling and adding-in correlated uniqueness items were applied (fit indices: Comparative Fit Index = 0.949, Standardised Root Mean Residual = 0.044). Our study supported the five-factor solution for the Mini-IPIP. It is valid and reliable to be used among individuals with drug abuse in Malaysia

Surgery-induced hippocampal angiotensin II elevation causes blood-brain barrier disruption via MMP/TIMP in aged rats

Reversible BBB disruption has been uniformly reported in several animal models of postoperative cognitive dysfunction (POCD). Nevertheless, the precise mechanism underlying this occurrence remains unclear. Using an aged rat model of POCD, we investigated the dynamic changes in expression of molecules involved in BBB disintegration, matrix metalloproteinase-2 (MMP-2) and -9 (MMP-9), as well as three of their endogenous tissue inhibitors (TIMP-1, -2, -3), and tried to establish the correlation between MMP/TIMP balance and surgery-induced hippocampal BBB disruption. We validated the increased hippocampal expression of angiotensin II (Ang II) and Ang II receptor type 1 (AT1) after surgery. We also found MMP/TIMP imbalance as early as 6 h after surgery, together with increased BBB permeability and decreased expression of Occludin and zonula occludens-1 (ZO-1), as well as increased basal lamina protein laminin at 24 h postsurgery. The AT1 antagonist candesartan restored MMP/TIMP equilibrium and modulated expression of Occludin and laminin, but not ZO-1, thereby improving BBB permeability. These events were accompanied by suppression of the surgery-induced canonical nuclear factor-κB (NF-κB) activation cascade. Nevertheless, AT1 antagonism did not affect nuclear receptor peroxisome proliferator-activated receptor-γ expression. Collectively, these findings suggest that surgery-induced Ang II release impairs BBB integrity by activating NF-κB signaling and disrupting downstream MMP/TIMP balance via AT1 receptor

Low-temperature-induced expression of rice ureidoglycolate amidohydrolase is mediated by a C-repeat/dehydration-responsive element that specifically interacts with rice C-repeat-binding factor 3

Nitrogen recycling and redistribution are important for the environmental stress response of plants. In non nitrogen-fixing plants, ureide metabolism is crucial to nitrogen recycling from organic sources. Various studies have suggested that the rate-limiting components of ureide metabolism respond to environmental stresses. However, the underlying regulation mechanism is not well understood. In this report, rice ureidoglycolate amidohydrolase (OsUAH), which is a recently identified enzyme catalyzing the final step of ureide degradation, was identified as low-temperature- (LT) but not abscisic acid- (ABA) regulated. To elucidate the LT regulatory mechanism at the transcriptional level, we isolated and characterized the promoter region of OsUAH (POsUAH). Series deletions revealed that a minimal region between -522 and -420 relative to the transcriptional start site was sufficient for the cold induction of POsUAH. Detailed analyses of this 103-bp fragment indicated that a C-repeat/dehydration-responsive (CRT/DRE) element localized at position -434 was essential for LT-responsive expression. A rice C-repeat-binding factors/DRE-binding proteins 1 (CBFs/DREB1s) subfamily member, OsCBF3, was screened to specifically bind to the CRT/DRE element in the minimal region both in yeast one-hybrid assays and in in vitro gel-shift analysis. Moreover, the promoter could be exclusively trans-activated by the interaction between the CRT/DRE element and OsCBF3 in vivo. These findings may help to elucidate the regulation mechanism of stress-responsive ureide metabolism genes and provide an example of the member-specific manipulation of the CBF/DREB1 subfamily

Smoothed Isotonic Estimators of a Monotone Baseline Hazard in the Cox Model

We consider the smoothed maximum likelihood estimator and the smoothed Grenander-type estimator for a monotone baseline hazard rate 0 in the Cox model. We analyze their asymptotic behaviour and show that they are asymptotically normal at rate nm=.2mC1/, when 0 is m 2 times continuously differentiable, and that both estimators are asymptotically equivalent. Finally, we present numerical results on pointwise confidence intervals that illustrate the comparable behaviour of the two methods.Statistic