942 research outputs found
Assessment of ground-motion amplification in the Fucino Basin (Central Italy) through seismic data
The Fucino basin (Central Italy) is one of the largest intermountain alluvial plain in the Appennines range. It has
a tectonic origin related to the presence of important systems of faults located in its northern and eastern edges.
Some of these faults are still active and capable of generating strong seismic events as the January 13th 1915 Ms
7.0 Avezzano earthquake (about 30000 casualties). Site effects related to the soft soils filling the basin can be very
important also taking into account the presence of historical villages located at the edges of the basin and new
settlements developed in the area.
In this paper we show the preliminary results of a seismic network installed in the Fucino area in order to collect
information about site amplification effects and geometry of the basin. A lake occupied the Fucino basin for many
thousands of years and it was completely drained at the end of the 19th century.
We analyze ambient seismic vibrations and recordings of about 150 local earthquakes mainly related to the seismic
sequence of the April 6th 2009 Mw 6.3 L’Aquila event. Moreover the strongest events of L’Aquila sequence were
analyzed at the three strong-motion permanent stations operating in the area. Using standard spectral techniques
we investigate the variation of resonance frequencies within the basin. The ground motion recorded in the
Fucino plain is mainly characterized by strong energy at low-frequencies (f < 1 Hz) affecting both horizontal and
vertical components. This is particularly evident for stations deployed in correspondence of very thick deposits
of sedimentary filling, where a significant increase of ground-motion amplitude and duration is caused by locally
generated surface waves. The amplification at low-frequencies (< 1 Hz) on the horizontal components can reach
up a factor of 10 in comparison to nearby stiff sites. However, we found evidences of seismic amplification
phenomena also for stiff sites surrounding the basin, including stations of the Italian strong motion network. The
independent geological information, the shallow shear-velocity profiles available for the basin can be combined
with resonance frequencies of the sites for deriving representative geological sections to be used as base for future
numerical 2D-3D modeling of the seismic wave propagation in the basin. Seismic modeling can be important to
reduce the seismic hazard in the area
Assessment of ground-motion amplification in the Fucino Basin (Central Italy) through seismic data
The Fucino basin (Central Italy) is one of the largest intermountain alluvial plain in the Appennines range. It has
a tectonic origin related to the presence of important systems of faults located in its northern and eastern edges.
Some of these faults are still active and capable of generating strong seismic events as the January 13th 1915 Ms
7.0 Avezzano earthquake (about 30000 casualties). Site effects related to the soft soils filling the basin can be very
important also taking into account the presence of historical villages located at the edges of the basin and new
settlements developed in the area.
In this paper we show the preliminary results of a seismic network installed in the Fucino area in order to collect
information about site amplification effects and geometry of the basin. A lake occupied the Fucino basin for many
thousands of years and it was completely drained at the end of the 19th century.
We analyze ambient seismic vibrations and recordings of about 150 local earthquakes mainly related to the seismic
sequence of the April 6th 2009 Mw 6.3 L’Aquila event. Moreover the strongest events of L’Aquila sequence were
analyzed at the three strong-motion permanent stations operating in the area. Using standard spectral techniques
we investigate the variation of resonance frequencies within the basin. The ground motion recorded in the
Fucino plain is mainly characterized by strong energy at low-frequencies (f < 1 Hz) affecting both horizontal and
vertical components. This is particularly evident for stations deployed in correspondence of very thick deposits
of sedimentary filling, where a significant increase of ground-motion amplitude and duration is caused by locally
generated surface waves. The amplification at low-frequencies (< 1 Hz) on the horizontal components can reach
up a factor of 10 in comparison to nearby stiff sites. However, we found evidences of seismic amplification
phenomena also for stiff sites surrounding the basin, including stations of the Italian strong motion network. The
independent geological information, the shallow shear-velocity profiles available for the basin can be combined
with resonance frequencies of the sites for deriving representative geological sections to be used as base for future
numerical 2D-3D modeling of the seismic wave propagation in the basin. Seismic modeling can be important to
reduce the seismic hazard in the area
Effetti di sito della piana del Fucino attraverso lo studio comparato di dati sismici e geologici
Il presente lavoro è incentrato nello studio della Piana del Fucino in termini di risposta sismica attraverso metodi di analisi geofisica e correlazioni dei risultati ottenuti con la geologia dell’area.
Uno dei terremoti più disastrosi della storia italiana è quello verificatosi nel gennaio del 1915 nella Marsica; ciò testimonia che l’area oggetto di studio è fortemente esposta al rischio sismico. È quindi opportuno provvedere alla riduzione di tale rischio operando in termini di prevenzione. Uno dei metodi consiste nella determinazione dei livelli di scuotimento al suolo attesi in caso di terremoto attraverso lo studio degli effetti di sito.
Per fare ciò si sono utilizzati i segnali sismici registrati da una rete di stazioni installate dall’Istituto Nazionale di Geofisica e Vulcanologia per la caratterizzazione geologico-geotecnica dei siti delle stazioni accelerometriche della Rete Accelerometrica Nazionale (richiesto in uno dei Progetti previsti della convenzione tra il Dipartimento della Protezione Civile e l’INGV nel triennio 2007- 2009). L’intervallo temporale coperto dalle stazioni va dall’ottobre 2008 al settembre 2009 ed il dataset selezionato comprende terremoti con Magnitudo superiore a 2 entro un raggio medio di 60 km da Avezzano. In seconda istanza si è proceduto all’installazione di altre stazioni temporanee sempre all’interno della Piana con lo scopo di registrare rumore ambientale a completamento dei dati già in possesso
Escaping the Phagocytic Oxidative Burst: The Role of SODB in the Survival of Pseudomonas aeruginosa Within Macrophages
Reactive oxygen species (ROS) are small oxygen-derived molecules that are used to control infections by phagocytic cells. In macrophages, the oxidative burst produced by the NOX2 NADPH-oxidase is essential to eradicate engulfed pathogens by both oxidative and non-oxidative killing. Indeed, while the superoxide anion (O2-) produced by NOX2, and the other ROS derived from its transformation, can directly target pathogens, ROS also contribute to activation of non-oxidative microbicidal effectors. The response of pathogens to the phagocytic oxidative burst includes the expression of different enzymes that target ROS to reduce their toxicity. Superoxide dismutases (SODs) are the primary scavengers of O2-, which is transformed into H2O2. In the Gram-negative Salmonella typhimurium, periplasmic SODCI has a major role in bacterial resistance to NOX-mediated oxidative stress. In Pseudomonas aeruginosa, the two periplasmic SODs, SODB, and SODM, appear to contribute to bacterial virulence in small-animal models. Furthermore, NOX2 oxidative stress is essential to restrict P. aeruginosa survival in macrophages early after infection. Here, we focused on the role of P. aeruginosa SODs in the counteracting of the lethal effects of the macrophage oxidative burst. Through this study of the survival of sod mutants in macrophages and the measurement of ROS in infected macrophages, we have identified a dual, antagonistic, role for SODB in P. aeruginosa survival. Indeed, the survival of the sodB mutants, but not of the sodM mutants, was greater than that of the wild-type (WT) bacteria early after infection, and sodB-infected macrophages showed higher levels of O2- and lower levels of H2O2. This suggests that SODB contributes to the production of lethal doses of H2O2 within the phagosome. However, later on following infection, the sodB mutants survived less that the WT bacteria, which highlights the pro-survival role of SODB. We have explained this defensive role through an investigation of the activation of autophagy, which was greater in the sodB-infected macrophages
A geology-based 3D velocity model of the Amatrice Basin (Central Italy)
In this paper we present a new methodological approach which integrates geological and geophysical data into a 3D modelling process to be mainly employed in seismic hazard assessment studies of earthquake-prone areas around the world, as well as in applications for land use and urban planning. As a case study, the reconstruction of a geology-based 3D velocity model of the uppermost hundreds of metres of the Amatrice high-seismic-hazard area is described.
The model was constructed using geological (e.g., maps, cross-sections and core-wells) and geophysical (e.g., down-hole, MASW, refraction, and seismic noise measurements) data, which were georeferenced and uploaded into 3D geological modelling software, where faults, stratigraphic boundaries, and geophysical attributes were digitised, checked, hierarchised, and modelled. The performed 3D geological model was parameterised with Vs and Vp velocities and, finally, the environmental noise (i.e., horizontal-to-vertical spectral ratio analysis, HVSR) recorded at some seismic stations was compared with the seismic responses modelled at some nearby control points.
In the study area, the proposed geology-based 3D velocity model represents both a new potential geophysical prediction tool for areas devoid of geophysical measurements (i.e. HVSR curves) and a potential input-model for future ground-motion and seismic-wave-propagation simulations aimed at a more precise local seismic response assessment and, consequently, at the development of more realistic seismic hazard scenarios.
The model here presented constitutes a first version of the 3D geological-geophysical model for the studied area, which will be improved with new data and more advanced algorithms available in the future
Geotechnical characterization of the upper Pleistocene-Holocene alluvial deposits of Roma (Italy) by means of multivariate geostatistics: Cross-validation results
We are presenting an attempt to evaluate the spatial variability of geotechnical parameters in the upper
Pleistocene–Holocene alluvial deposits of Roma (Italy) by means of multivariate geostatistics.
The upper Pleistocene–Holocene alluvial deposits of Roma are sensitive to high levels of geohazard. They
occupy a sizable and significant part of the city, being the foundation for many monuments, historical
neighborhoods, and archaeological areas, and the main host of the present and future subway lines. We have
stored information from more than 2000 geotechnical boreholes crossing the alluvial deposits into a
relational database. For the present study, only the boreholes with lithologic/textural interpretation and
geotechnical information were selected. The set includes 283 boreholes and 719 samples, which have a set of
geotechnical information comprising physical properties and mechanical parameters.
Techniques of multivariate statistics and geostatistics were combined and compared to evaluate the
estimation methods of the mechanical parameters, with special reference to the drained friction angle from
direct shear test (φ′). Principal Component Analysis was applied to the dataset to highlight the relationships
between the geotechnical parameters. Through cross-validation analysis, multiple linear regression, kriging,
and cokriging were tested as estimators of φ′. Cross-validation demonstrates that the cokriging with
granulometries as auxiliary variables is the most suitable method to estimate φ′. In addition to proving that
cokriging is a good estimator of φ′, cross-validation demonstrates that input data are coherent and this
allows us to use them for estimation of geotechnical parameters, although they come from different
laboratories and different vintages.
Nevertheless, to get the same good results of cross-validation in estimation, it is necessary for granulometries
to be available at grid points. Since this information being not available at all grid points, it is expected that, in
the future, textural information can be derived in an indirect way, i.e., from lithologic/textural spatial
reconstructions.Published251-2682.3. TTC - Laboratori di chimica e fisica delle rocceJCR Journalope
Geotechnical characterization of the upper Pleistocene-Holocene alluvial deposits of Roma (Italy) by means of multivariate geostatistics: Cross-validation results
We are presenting an attempt to evaluate the spatial variability of geotechnical parameters in the upper
Pleistocene–Holocene alluvial deposits of Roma (Italy) by means of multivariate geostatistics.
The upper Pleistocene–Holocene alluvial deposits of Roma are sensitive to high levels of geohazard. They
occupy a sizable and significant part of the city, being the foundation for many monuments, historical
neighborhoods, and archaeological areas, and the main host of the present and future subway lines. We have
stored information from more than 2000 geotechnical boreholes crossing the alluvial deposits into a
relational database. For the present study, only the boreholes with lithologic/textural interpretation and
geotechnical information were selected. The set includes 283 boreholes and 719 samples, which have a set of
geotechnical information comprising physical properties and mechanical parameters.
Techniques of multivariate statistics and geostatistics were combined and compared to evaluate the
estimation methods of the mechanical parameters, with special reference to the drained friction angle from
direct shear test (φ′). Principal Component Analysis was applied to the dataset to highlight the relationships
between the geotechnical parameters. Through cross-validation analysis, multiple linear regression, kriging,
and cokriging were tested as estimators of φ′. Cross-validation demonstrates that the cokriging with
granulometries as auxiliary variables is the most suitable method to estimate φ′. In addition to proving that
cokriging is a good estimator of φ′, cross-validation demonstrates that input data are coherent and this
allows us to use them for estimation of geotechnical parameters, although they come from different
laboratories and different vintages.
Nevertheless, to get the same good results of cross-validation in estimation, it is necessary for granulometries
to be available at grid points. Since this information being not available at all grid points, it is expected that, in
the future, textural information can be derived in an indirect way, i.e., from lithologic/textural spatial
reconstructions
Self-consistent simulation of plasma scenarios for ITER using a combination of 1.5D transport codes and free-boundary equilibrium codes
Self-consistent transport simulation of ITER scenarios is a very important
tool for the exploration of the operational space and for scenario
optimisation. It also provides an assessment of the compatibility of developed
scenarios (which include fast transient events) with machine constraints, in
particular with the poloidal field (PF) coil system, heating and current drive
(H&CD), fuelling and particle and energy exhaust systems. This paper discusses
results of predictive modelling of all reference ITER scenarios and variants
using two suite of linked transport and equilibrium codes. The first suite
consisting of the 1.5D core/2D SOL code JINTRAC [1] and the free boundary
equilibrium evolution code CREATE-NL [2,3], was mainly used to simulate the
inductive D-T reference Scenario-2 with fusion gain Q=10 and its variants in H,
D and He (including ITER scenarios with reduced current and toroidal field).
The second suite of codes was used mainly for the modelling of hybrid and
steady state ITER scenarios. It combines the 1.5D core transport code CRONOS
[4] and the free boundary equilibrium evolution code DINA-CH [5].Comment: 23 pages, 18 figure
Functional approach to the electromagnetic response function: the Longitudinal Channel
In this paper we address the (charge) longitudinal electromagnetic response
for a homogeneous system of nucleons interacting via meson exchanges in the
functional framework. This approach warrants consistency if the calculation is
carried on order-by-order in the mesonic loop expansion with RPA-dressed
mesonic propagators. At the 1-loop order and considering pion, rho and omega
exchanges we obtain a quenching of the response, in line with the experimental
results.Comment: RevTeX, 18 figures available upon request - to be published in
Physical Review
Interfering Doorway States and Giant Resonances. I: Resonance Spectrum and Multipole Strengths
A phenomenological schematic model of multipole giant resonances (GR) is
considered which treats the external interaction via common decay channels on
the same footing as the coherent part of the internal residual interaction. The
damping due to the coupling to the sea of complicated states is neglected. As a
result, the formation of GR is governed by the interplay and competition of two
kinds of collectivity, the internal and the external one. The mixing of the
doorway components of a GR due to the external interaction influences
significantly their multipole strengths, widths and positions in energy. In
particular, a narrow resonance state with an appreciable multipole strength is
formed when the doorway components strongly overlap.Comment: 20 pages, LaTeX, 3 ps-figures, to appear in PRC (July 1997
- …