20,774 research outputs found
Comparison of porcine thorax to gelatine blocks for wound
Published online first in International Journal of Legal Medicine. The support of EPSRC and The Home Office are recognised. Open Access, this article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http:/ /creativecommons.org/licenses/by/4.0/)Tissue simulants are typically used in ballistic testing as substitutes for biological tissues. Many simulants have been used, with gelatine amongst the most common. While two concentrations of gelatine (10 and 20 %) have been used extensively, no agreed standard exists for the preparation of either. Comparison of ballistic damage produced in both concentrations is lacking. The damage produced in gelatine is also questioned, with regards to what it would mean for specific areas of living tissue. The aim of the work discussed in this paper was to consider how damage caused by selected pistol and rifle ammunition varied in different simulants. Damage to gelatine blocks 10 and 20 % in concentration were tested with 9 mm Luger (9 × 19 full metal jacket; FMJ) rounds, while damage produced by .223 Remington (5.56 × 45 Federal Premium® Tactical® Bonded®) rounds to porcine thorax sections (skin, underlying tissue, ribs, lungs, ribs, underlying tissue, skin; backed by a block of 10 % gelatine) were compared to 10 and 20 % gelatine blocks. Results from the .223 Remington rifle round, which is one that typically expands on impact, revealed depths of penetration in the thorax arrangement were significantly different to 20 % gelatine, but not 10 % gelatine. The level of damage produced in the simulated thoraxes was smaller in scale to that witnessed in both gelatine concentrations,though greater debris was produced in the thoraxes.The support of EPSRC and The Home Office are recognised
Role of Schizosaccharomyces pombe RecQ homolog recombination and checkpoint genes in UV Damage tolerance
The cellular responses to DNA damage are complex and include direct DNA repair pathways that remove the damage and indirect damage responses which allow cells to survive DNA damage that has not been, or cannot be, removed. We have identified the gene mutated in the rad12.502 strain as a Schizosaccharomyces pombe recQ homolog. The same gene (designated rqh1) is also mutated in the hus2.22 mutant. We show that Rqh1 is involved in a DNA damage survival mechanism which prevents cell death when UV-induced DNA damage cannot be removed. This pathway also requires the correct functioning of the recombination machinery and the six checkpoint tad gene products plus the Cds1 kinase. Our data suggest that Rqh1 operates during S phase as part of a mechanism which prevents DNA damage causing cell lethality. This process may involve the bypass of DNA damage sites by the replication fork. Finally, in contrast with the reported literature, we do not find that rqh1 (rad12) mutant cells are defective in UV dimer endonuclease activity
Unbinding of giant vortices in states of competing order
Funding: EPSRC (UK) via Grants No. EP/I031014/1 and No. EP/H049584/1.We consider a two-dimensional system with two order parameters, one with O(2) symmetry and one with O(M), near a point in parameter space where they couple to become a single O(2+M) order. While the O(2) sector supports vortex excitations, these vortices must somehow disappear as the high symmetry point is approached. We develop a variational argument which shows that the size of the vortex cores diverges as 1/root Delta and the Berezinskii-Kosterlitz-Thouless transition temperature of the O(2) order vanishes as 1/1n(1/Delta), where Delta denotes the distance from the high-symmetry point. Our physical picture is confirmed by a renormalization group analysis which gives further logarithmic corrections, and demonstrates full symmetry restoration within the cores.Publisher PDFPeer reviewe
Emergence of steady and oscillatory localized structures in a phytoplankton-nutrient model
Co-limitation of marine phytoplankton growth by light and nutrient, both of
which are essential for phytoplankton, leads to complex dynamic behavior and a
wide array of coherent patterns. The building blocks of this array can be
considered to be deep chlorophyll maxima, or DCMs, which are structures
localized in a finite depth interior to the water column. From an ecological
point of view, DCMs are evocative of a balance between the inflow of light from
the water surface and of nutrients from the sediment. From a (linear)
bifurcational point of view, they appear through a transcritical bifurcation in
which the trivial, no-plankton steady state is destabilized. This article is
devoted to the analytic investigation of the weakly nonlinear dynamics of these
DCM patterns, and it has two overarching themes. The first of these concerns
the fate of the destabilizing stationary DCM mode beyond the center manifold
regime. Exploiting the natural singularly perturbed nature of the model, we
derive an explicit reduced model of asymptotically high dimension which fully
captures these dynamics. Our subsequent and fully detailed study of this model
- which involves a subtle asymptotic analysis necessarily transgressing the
boundaries of a local center manifold reduction - establishes that a stable DCM
pattern indeed appears from a transcritical bifurcation. However, we also
deduce that asymptotically close to the original destabilization, the DCM
looses its stability in a secondary bifurcation of Hopf type. This is in
agreement with indications from numerical simulations available in the
literature. Employing the same methods, we also identify a much larger DCM
pattern. The development of the method underpinning this work - which, we
expect, shall prove useful for a larger class of models - forms the second
theme of this article
Stability criterion for self-similar solutions with a scalar field and those with a stiff fluid in general relativity
A stability criterion is derived in general relativity for self-similar
solutions with a scalar field and those with a stiff fluid, which is a perfect
fluid with the equation of state . A wide class of self-similar
solutions turn out to be unstable against kink mode perturbation. According to
the criterion, the Evans-Coleman stiff-fluid solution is unstable and cannot be
a critical solution for the spherical collapse of a stiff fluid if we allow
sufficiently small discontinuity in the density gradient field in the initial
data sets. The self-similar scalar-field solution, which was recently found
numerically by Brady {\it et al.} (2002 {\it Class. Quantum. Grav.} {\bf 19}
6359), is also unstable. Both the flat Friedmann universe with a scalar field
and that with a stiff fluid suffer from kink instability at the particle
horizon scale.Comment: 15 pages, accepted for publication in Classical and Quantum Gravity,
typos correcte
The state space and physical interpretation of self-similar spherically symmetric perfect-fluid models
The purpose of this paper is to further investigate the solution space of
self-similar spherically symmetric perfect-fluid models and gain deeper
understanding of the physical aspects of these solutions. We achieve this by
combining the state space description of the homothetic approach with the use
of the physically interesting quantities arising in the comoving approach. We
focus on three types of models. First, we consider models that are natural
inhomogeneous generalizations of the Friedmann Universe; such models are
asymptotically Friedmann in their past and evolve fluctuations in the energy
density at later times. Second, we consider so-called quasi-static models. This
class includes models that undergo self-similar gravitational collapse and is
important for studying the formation of naked singularities. If naked
singularities do form, they have profound implications for the predictability
of general relativity as a theory. Third, we consider a new class of
asymptotically Minkowski self-similar spacetimes, emphasizing that some of them
are associated with the self-similar solutions associated with the critical
behaviour observed in recent gravitational collapse calculations.Comment: 24 pages, 12 figure
The Influence of Thin Clay Layers on the Design and Performance of a Flexible Cantilever Retaining Wall
This case study presents the methods that were used successfully to redesign and monitor the performance of a flexible cantilever retaining wall, incorporating an in situ support berm, at a site where thin, weak clay layers were detected in the foundation during construction. A potential mode of failure termed berm-block sliding , where the retaining wall pushes out the entire support berm as a block along the clay layers, governed the design analysis. Evidence of presheared planes within the clay layers required that the design shear strength parameters be based on residual values. The clay had a significant cohesion component which was utilized in the design along with an observational method towards construction and post-construction behavior. The observational approach included a comprehensive instrumentation and monitoring program and the development of a remedial stabilization contingency plan to be implemented if necessary. This design methodology resulted in significant cost savings
Recommended from our members
Continued evaluation of potential for geologic storage of carbon dioxide in the southeastern United States
Southern States Energy Board
Duke Energy
Santee Cooper Power
Southern CompanyBureau of Economic Geolog
- …