Superplastic Deformation of Alumina Composites Reinforced with Carbon Nanofibers and with Graphene Oxide Sintered by SPS—Experimental Testing and Theoretical Interpretation

The superplastic behavior of alumina-based nanostructured ceramics (Al2O3) is an important issue in the world of materials. The main body of this paper is an analysis of the creep behavior of polycrystals, with grain boundary sliding as the main deformation mechanism at high temperatures. Concomitant accommodation of grain shapes to preserve spatial continuity has a comparatively small effect on the strain rate. The constitutive equations for small deformations, relating strain and strain rate, derived from two models for grain sliding, are compared with the experimental data with their respective uncertainties. The data follow from experiments on the plastic deformation of alumina composites reinforced, on the one hand by graphene oxide, and on the other hand by carbon nanofibers sintered by SPS. The results show good agreement between experiment and theory for these advanced ceramics, particularly for one of the assumed models. The values obtained of ξ2 for model A were in the interval 0.0002–0.1189, and for model B were in the interval 0.000001–0.0561. The values obtained of R2 for model A were in the interval 0.9122–0.9994, and for model B were in the interval 0.9586–0.9999. The threshold stress was between (3.05 · 10−15–25.68) MPa.Junta de Andalucía the regional projects P18-RTJ1972 and P20-01121España Ministerio de Economía y Competitividad and Fondo Europeo de Desarrollo Regional funds through the projects MAT2015-71411-R and RTI2018-099033-B-C33Universidad de Sevilla “VI Plan Propio de Investigación y Transferencia-US 2017España Ministerio de Ciencia, Innovación y Universidades The projects PGC2018-094952-B-I00 (MCIU/AEI/FEDER, UE) and PID2019- 103847-RJ-I0

Mechanical characterization of sol-gel alumina-based ceramics with intragranular reinforcement of multiwalled carbon nanotubes

Multiwalled carbon nanotubes (MWCNTs) have been widely considered for mechanical reinforcement of ceramic matrix composites. Nevertheless, the efficiency of this reinforcement strategy is under debate due to fabrication issues, such as a good homogenization or the location of the MWCNTs inside the matrix composite. Regarding this, the intragranular location of the MWCNTs has been deemed a crucial feature for optimizing the reinforcement compared to the typical intergranular placement achieved by conventional procedures. Recently, the sol-gel method has been reconsidered, as it promotes the intragranular placement of the MWCNTs. This work presents the mechanical characterization of these composites synthesized by the sol-gel method, where crack-bridging has been revealed as toughening mechanism. Finally, the conventional use of the bibliographical Young's modulus of pure alumina for the estimation of the fracture toughness is discussed, obtaining significant improvements of the fracture toughness when indentation measurements are treated by considering elastic moduli obtained by nanoindentation.Ministerio de Ciencia e Innovación PGC2018-094952-B-100Junta de Andalucía P12-FQM-107

Microbial Communities in Pre-Columbian Coprolites

The study of coprolites from earlier cultures represents a great opportunity to study an “unaltered” composition of the intestinal microbiota. To test this, pre-Columbian coprolites from two cultures, the Huecoid and Saladoid, were evaluated for the presence of DNA, proteins and lipids by cytochemical staining, human and/or dog-specific Bacteroides spp. by PCR, as well as bacteria, fungi and archaea using Terminal Restriction Fragment analyses. DNA, proteins and lipids, and human-specific Bacteroides DNA were detected in all coprolites. Multidimensional scaling analyses resulted in spatial arrangements of microbial profiles by culture, further supported by cluster analysis and ANOSIM. Differences between the microbial communities were positively correlated with culture, and SIMPER analysis indicated 68.8% dissimilarity between the Huecoid and Saladoid. Proteobacteria, Bacteroidetes and methanogens were found in all coprolite samples. Propionebacteria, Shewanella and lactic acid bacteria dominated in the Huecoid samples, while Acidobacteria, and peptococci were dominant in Saladoid samples. Yeasts, including Candida albicans and Crypotococcus spp. were found in all samples. Basidiomycetes were the most notable fungi in Huecoid samples while Ascomycetes predominated in Saladoid samples, suggesting differences in dietary habits. Our study provides an approach for the study of the microbial communities of coprolite samples from various cultures

Improving glass-fiber epoxy composites via interlayer toughening with polyacrylonitrile/multiwalled carbon nanotubes electrospun fibers

The development of innovative engineered epoxy composites aiming to manufacture cost-efficient materials with reduced weight and enhanced physical properties remains as a current industrial challenge. In this work we report an original procedure for manufacturing glass-fiber epoxy reinforced nanocomposites (GFECs) by employing electrospun fiber-mats as a reinforcing phase. These fibers have been produced from polyacrylonitrile and multiwalled carbon nanotubes solutions. Optimal protocols are designed by combining Taguchi method with the morphological, structural and mechanical properties obtained by scanning electron microscopy, profilometry and tensile tests. It is demonstrated that GFECs fabricated using GF800 glass fiber show an improvement/enhancement of the mechanical properties with a fracture strain up to 500¿MPa (around 20% higher than the non-reinforced epoxy composite counterpart). It is also shown that GFECs fabricated using GF3M glass fiber exhibited a reduction of the roughness up to 56%, which corresponds with a roughness improvement from N8 to N7 following the guidelines provided by the ISO 1302. These results suggest that this type of nanocomposites would be suitable to be used in the aeronautics and automotive industries.This work was financially supported by the “Convocatoria de Ayudas a la Realización de Proyectos de Grupos de Investigación 2020-2021” of the Universidad Católica de Murcia (UCAM), Spain, Reference: PMFI-12/21. Pavel Ryzhakov, Jordi Pons-Prats, and Christian Narváez- Muñoz would also like to acknowledge the support of the Ministerio de Ciencia, Innovación y Universidades of Spain via the “Severo Ochoa Programme” for Centres of Excellence in R&D (reference: CEX2018-000797-S) given to the International Centre for Numerical Methods in Engineering (CIMNE). The work of Christian Narváez- Muñoz was financially supported by the “Severo Ochoa PhD Scholarship” Reference: PRE2020-096632. Pavel Ryzhakov and Jordi Pons-Prats are Serra Hunter fellows.Peer ReviewedPostprint (author's final draft

Mild cognitive decline. A position statement of the Cognitive Decline Group of the European Innovation Partnership for Active and Healthy Ageing (EIPAHA)

Introduction Mild cognitive impairment (MCI) is a term used to describe a level of decline in cognition which is seen as an intermediate stage between normal ageing and dementia, and which many consider to be a prodromal stage of neurodegeneration that may become dementia. That is, it is perceived as a high risk level of cognitive change. The increasing burden of dementia in our society, but also our increasing understanding of its risk factors and potential interventions, require diligent management of MCI in order to find strategies that produce effective prevention of dementia. Aim To update knowledge regarding mild cognitive impairment, and to bring together and appraise evidence about the main features of clinical interest: definitions, prevalence and stability, risk factors, screening, and management and intervention. Methods Literature review and consensus of expert opinion. Results and conclusion MCI describes a level of impairment in which deteriorating cognitive functions still allow for reasonable independent living, including some compensatory strategies. While there is evidence for some early risk factors, there is still a need to more precisely delineate and distinguish early manifestations of frank dementia from cognitive impairment that is less likely to progress to dementia, and furthermore to develop improved prospective evidence for positive response to intervention. An important limitation derives from the scarcity of studies that take MCI as an endpoint. Strategies for effective management suffer from the same limitation, since most studies have focused on dementia. Behavioural changes may represent the most cost-effective approach

Predictive Power of the "Trigger Tool" for the detection of adverse events in general surgery: a multicenter observational validation study

Background In spite of the global implementation of standardized surgical safety checklists and evidence-based practices, general surgery remains associated with a high residual risk of preventable perioperative complications and adverse events. This study was designed to validate the hypothesis that a new “Trigger Tool” represents a sensitive predictor of adverse events in general surgery. Methods An observational multicenter validation study was performed among 31 hospitals in Spain. The previously described “Trigger Tool” based on 40 specific triggers was applied to validate the predictive power of predicting adverse events in the perioperative care of surgical patients. A prediction model was used by means of a binary logistic regression analysis. Results The prevalence of adverse events among a total of 1,132 surgical cases included in this study was 31.53%. The “Trigger Tool” had a sensitivity and specificity of 86.27% and 79.55% respectively for predicting these adverse events. A total of 12 selected triggers of overall 40 triggers were identified for optimizing the predictive power of the “Trigger Tool”. Conclusions The “Trigger Tool” has a high predictive capacity for predicting adverse events in surgical procedures. We recommend a revision of the original 40 triggers to 12 selected triggers to optimize the predictive power of this tool, which will have to be validated in future studies

Superplastic Deformation of Alumina Composites Reinforced with Carbon Nanofibers and with Graphene Oxide Sintered by SPS—Experimental Testing and Theoretical Interpretation

The superplastic behavior of alumina-based nanostructured ceramics (Al2O3) is an important issue in the world of materials. The main body of this paper is an analysis of the creep behavior of polycrystals, with grain boundary sliding as the main deformation mechanism at high temperatures. Concomitant accommodation of grain shapes to preserve spatial continuity has a comparatively small effect on the strain rate. The constitutive equations for small deformations, relating strain and strain rate, derived from two models for grain sliding, are compared with the experimental data with their respective uncertainties. The data follow from experiments on the plastic deformation of alumina composites reinforced, on the one hand by graphene oxide, and on the other hand by carbon nanofibers sintered by SPS. The results show good agreement between experiment and theory for these advanced ceramics, particularly for one of the assumed models. The values obtained of ξ2 for model A were in the interval 0.0002–0.1189, and for model B were in the interval 0.000001–0.0561. The values obtained of R2 for model A were in the interval 0.9122–0.9994, and for model B were in the interval 0.9586–0.9999. The threshold stress was between (3.05 · 10−15–25.68) MPa

Fabrication of Porous Alumina Structures by SPS and Carbon Sacrificial Template for Bone Regeneration

In this work, a procedure for fabricating porous alumina with the use of a carbon sacrificial template has been tested in order to optimize the fabrication of porous structures mimicking the porosity and mechanical properties of the human cortical bone. Two different sources of sacrificial carbon were used and compared, and different sintering and calcination routes were considered. The porosity of the alumina structures studied by Hg porosimetry revealed that the amount of porosity and the size and shape of the pores are still below the required values, although some acicular pores were clearly observed by SEM. Moreover, measured mechanical properties (Young’s modulus) remained below that of the bone, suggesting the need for further consolidation treatments. In summary, these encouraging results drive the optimization of future fabrication routes.This research was funded by Project PGC2018-094952-B-I00 (INTRACER); by FEDER/Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación is acknowledged, project P20_01121 (FRAC); and by Consejería de Transformación Económica, Industria, Conocimiento y Universidades (Junta de Andalucía). Special action I.9 from the VI-PPITUS (Universidad de Sevilla). M.G.-S. acknowledges European Social Fund from the Empleo Juvenil European Plan.Peer reviewe

High-temperature creep of carbon nanofiber-reinforced and graphene oxide-reinforced alumina composites sintered by spark plasma sintering

Alumina (AlO) ceramic composites reinforced with either graphene oxide (GO) or carbon nanofibers (CNFs) were prepared using Spark Plasma Sintering. The effects of GO and CNFs on the microstructure and in consequence on their mechanical properties were investigated. The microstructure of the sintered materials have been characterized quantitatively prior to and after the creep experiments in order to discover the deformation mechanism. Graphene-oxide reinforced alumina composites were found to be more creep resistant than carbon nanofibers-reinforced alumina ones or monolithic alumina with the same grain size distribution. In all the cases, grain boundary sliding was identified as the deformation mechanism.The authors acknowledge the financial support awarded by the Regional project of Excellence of ''Junta de Andalucía'' P12-FQM-1079 and the Spanish MINECO and FEDER funds through the projects MAT2015-71411-R and MAT2015-67586-C3-2-R