Fenómenos de retracción y comportamiento frente a la corrosión de materiales base cemento de bajo pH basados en OPC o CAC

Prior to using low-pH cementitious materials in underground repositories for high level waste, the characteristics determining their long-term durability must be analysed in depth. In this sense, different shrinkage tests have been made on mortar and concrete specimens using low-pH cement formulations based on ordinary portland cement (OPC) or calcium aluminate cement (CAC), with high mineral admixtures contents. They showed similar autogenous shrinkage than samples without mineral admixtures but higher drying shrinkage when materials based on OPC with high silica fume contents were considered. Besides, as the use of reinforced concrete could be required in underground repositories, the susceptibility of reinforcement to corrosion when using low-pH cementitious materials based on OPC was analyzed, considering carbon steel and galvanized steel. In the formers corrosion was detected due to the low pore solution pH but any problem was detected when galvanized reinforcement were used.Previo al empleo de materiales con cementos de bajo pH en almacenamientos geológicos profundos (AGP) de residuos radiactivos de alta actividad, características relacionadas con su durabilidad a largo plazo deben ser verificadas. Así, su estabilidad volumétrica se ha analizado en morteros y hormigones de bajo pH basados en OPC o CAC, con elevados contenidos de adiciones minerales. Estos presentaron retracciones autógenas similares a las medidas en materiales convencionales, pero retracciones por secado mayores en los basados en OPC y altos contenidos de humo de sílice. Dado que en zonas de los AGP podría emplearse hormigón armado, también se evaluó la susceptibilidad a la corrosión de aceros al carbono y aceros galvanizados en materiales de bajo pH basados en OPC. Se detectó un inicio temprano de corrosión en los primeros debido al bajo pH presente en el fluido de los poros de estos materiales, sin detectarse problemas al emplear aceros galvanizados

May the NAO index be used to forecast rain in Spain?

This paper studies the influence of the North Atlantic Oscillation (NAO) on monthly, seasonal and annual precipitation regimes in continental Spain. The data used for this study include the monthly rain series of 325 meteorological stations distributed homogeneously over the study zone, and the monthly NAO indices from 1961 to 1998. A total of 5525 rain series were employed for the analysis. Simple and multiple linear correlations were established between these variables in different combinations. The main aim was to check whether monthly, seasonal or annual precipitation data could be predicted using earlier precipitation data and the NAO index. The geographical areas where the stations have shown a statistically significant correlation have been represented on maps. The results differ depending on the correlation, but, in general, the best results have been found in the fall and winter months. Finally, a practical application of the method was carried out in the Ebro Valley and it was observed that the combination of the NAO index for spring and summer and the precipitation registered in those two seasons may be useful to forecast rain in the fall.Este trabajo estudia la influencia de la Oscilación del Atlántico Norte (NAO) en el régimen de precipitaciones mensuales, estacionales y anuales de la España Peninsular. Para ello se han utilizado los datos mensuales de precipitación de 325 estaciones pluviométricas repartidas homogéneamente y los índices mensuales del índice NAO desde 1961 a 1998; se han usado un total de 5525 series de precipitación. El estudio se ha realizado mediante correlaciones lineales simples o múltiples entre estas variables utilizando diferentes combinaciones. Se trata de ver si se podría predecir la precipitación mensual, estacional o bien anual a partir de datos previos de precipitación y del índice NAO. Se han representado espacialmente las zonas geográficas cuyos observatorios manifiestan una correlación estadísticamente significativa. Los resultados difieren del tipo de correlación elegido, pero en general los mejores resultados se encuentran en los meses de invierno. Por último, se ha aplicado esta metodología al Valle del Ebro y se ha observado que una combinación del índice NAO de primavera y verano, junto con la precipitación registrada en esas dos estaciones podría ser útil para predecir la precipitación de otoño.publishe

Técnicas Factoriales de Análisis de Tablas Múltiples: Nuevos Desarrollos Empíricos

Existen varias técnicas de análisis de tablas múltiples en la literatura. Estas técnicas tienen, sin embargo, lagunas de aplicación cuando las tablas están compuestas por un número diferente de individuos, especialmente si las variables incluidas en las tablas son cualitativas. Para este tipo de situaciones introducimos una modificación del análisis que permite el análisis conjunto de dichas tablas. Finalmente, se estudia la estabilidad de los resultados obtenidos por el Análisis Factorial Múltiple haciendo uso del Análisis de Componentes Principales.STATIS, análisis de correspondencias múltiples, análisis de componentes principales, variables cualitativas, análisis factorial múltiple

Cost-effectiveness of upper extremity dry needling in the rehabilitation of patients with stroke

Introduction: Dry needling (DN) has been shown to be effective for the treatment of upper extremity hypertonia in patients with stroke. Purpose: To evaluate the cost-effectiveness of DN in patients with stroke. Methods: A cost-effectiveness analysis was performed in a research study conducted at a Spanish public hospital where patients were classified into two groups with or without DN. Hypertonia was measured using the Modified Modified Ashworth Scale (MMAS), and quality of life (QOL) was assessed using the EuroQoL 5-dimension questionnaire. Data regarding the effects and costs of physiotherapy were presented by calculating the mean and 95% confidence interval. The health outcomes were evaluated considering the rate of responders to the treatment based on the MMAS. Spanish preference weights were used to estimate quality-adjusted life years (QALYs). The incremental cost-effectiveness ratio (ICER) and incremental cost-utility ratio (ICUR) were calculated to determine the economic value of DN. Results: Eighty patients with stroke in the subacute stage of recovery were selected to participate in this study. Based on the rate of responders, the ICER of the DN group was very low. Despite the sensitivity analysis performed, the results of the ICUR were not encouraging. Discussion: Cost-effectiveness with responder rate results were favourable for the DN group and were confirmed by the sensitivity analysis according to levels of care. In addition, our findings revealed that 4 weeks of treatment could be more cost-effective than 8 weeks. DN treatment of the upper extremity appears to be cost-effective based on the rate of responders measured using the MMAS scale. © The Author(s) 2021

Pre-fire aboveground biomass, estimated from LiDAR, spectral and field inventory data, as a major driver of burn severity in maritime pine (Pinus pinaster) ecosystems

100022Background: The characterization of surface and canopy fuel loadings in fire-prone pine ecosystems is critical for understanding fire behavior and anticipating the most harmful ecological effects of fire. Nevertheless, the joint consideration of both overstory and understory strata in burn severity assessments is often dismissed. The aim of this work was to assess the role of total, overstory and understory pre-fire aboveground biomass (AGB), estimated by means of airborne Light Detection and Ranging (LiDAR) and Landsat data, as drivers of burn severity in a megafire occurred in a pine ecosystem dominated by Pinus pinaster Ait. in the western Mediterranean Basin. Results: Total and overstory AGB were more accurately estimated (R2 equal to 0.72 and 0.68, respectively) from LiDAR and spectral data than understory AGB (R2 ¼ 0.26). Density and height percentile LiDAR metrics for several strata were found to be important predictors of AGB. Burn severity responded markedly and non-linearly to total (R2 ¼ 0.60) and overstory (R2 ¼ 0.53) AGB, whereas the relationship with understory AGB was weaker (R2 ¼ 0.21). Nevertheless, the overstory plus understory AGB contribution led to the highest ability to predict burn severity (RMSE ¼ 122.46 in dNBR scale), instead of the joint consideration as total AGB (RMSE ¼ 158.41). Conclusions: This study novelty evaluated the potential of pre-fire AGB, as a vegetation biophysical property derived from LiDAR, spectral and field plot inventory data, for predicting burn severity, separating the contribution of the fuel loads in the understory and overstory strata in Pinus pinaster stands. The evidenced relationships between burn severity and pre-fire AGB distribution in Pinus pinaster stands would allow the implementation of threshold criteria to support decision making in fuel treatments designed to minimize crown fire hazard.S

Dynamic bonding of metallic nanocontacts: Insights from experiments and atomistic simulations

The conductance across an atomically narrow metallic contact can be measured by using scanning tunneling microscopy. In certain situations, a jump in the conductance is observed right at the point of contact between the tip and the surface, which is known as "jump to contact" (JC). Such behavior provides a way to explore, at a fundamental level, how bonding between metallic atoms occurs dynamically. This phenomenon depends not only on the type of metal but also on the geometry of the two electrodes. For example, while some authors always find JC when approaching two atomically sharp tips of Cu, others find that a smooth transition occurs when approaching a Cu tip to an adatom on a flat surface of Cu. In an attempt to show that all these results are consistent, we make use of atomistic simulations; in particular, classical molecular dynamics together with density functional theory transport calculations to explore a number of possible scenarios. Simulations are performed for two different materials: Cu and Au in a [100] crystal orientation and at a temperature of 4.2 K. These simulations allow us to study the contribution of short- and long-range interactions to the process of bonding between metallic atoms, as well as to compare directly with experimental measurements of conductance, giving a plausible explanation for the different experimental observations. Moreover, we show a correlation between the cohesive energy of the metal, its Young's modulus, and the frequency of occurrence of a jump to contactW. Dednam thanks Dr. A. E. Botha for helpful discussions and acknowledges support from the National Research Foundation of South Africa through the Scarce Skills Masters scholarship funding programme (Grant Unique Number 92138). This work is supported by the Generalitat Valenciana through Grant Reference PROMETEO2012/011 and MINECO under Grant No. FIS2013-47328, by European Union structural funds and the Comunidad de Madrid Programs S2013/MIT-3007 and P2013/MIT-2850. This work is also part of the research programme of the Foundation for Fundamental Research on Matter (FOM), which is financially supported by the Netherlands Organisation for Scientific Research (NWO

Cost-effectiveness of two dry needling interventions for plantar heel pain: A secondary analysis of an rct

Plantar heel pain is a common cause of foot pain that affects patients’ quality of life and represents a significant cost for the healthcare system. Dry needling and percutaneous needle electrolysis are two minimally invasive treatments that were shown to be effective for the management of plantar heel pain. The aim of our study was to compare these two treatments in terms of health and economic consequences based on the results of a published randomized controlled trial. For this, we evaluated the costs from the point of view of the hospital and we carried out a cost-effectiveness study using quality of life as the main variable according to the Eq-5D-5L questionnaire. The cost of the complete treatment with dry needling (DN) was €178.86, while the percutaneous needle electrolysis (PNE) was €200.90. The quality of life of patients improved and was translated into +0.615 quality-adjusted life years (QALYs) for DN and +0.669 for PNE. PNE presented an average incremental cost-effectiveness ratio (ICER) of €411.34/QALY against DN. These results indicate that PNE had a better cost-effectiveness ratio for the treatment of plantar heel pain than DN