Magnitude estimation of the 1900 earthquake in Venezuela based on its coseismic effects

The 29 October, 1900, earthquake occurred in Venezuela triggered six landslides and six liquefactions located in the center-north region of Venezuela and La Tortuga island. Due to the location of the coseismic effects, the barycenter and the focal depth related to this earthquake, it was possible to calculate the magnitude by using several statistical methods. The results show a magnitude in the range 7.4-7.7 Mw, with an average value equal to 7.6 Mw, which is consistent with the instrumental magnitude of 7.6 Mw obtained by Fiedler (1988) and the macrosismic magnitude by Vásquez et al. (2018) equal to 7.5 ± 0.3 Mw estimated by using the Bakun and Wentworth (1997) method

Humoral and T-Cell Mediated Response after the Third Dose of mRNA Vaccines in Patients with Systemic Lupus Erythematosus on Belimumab

Objective: To evaluate humoral and T-cell cellular-mediated immune response after three doses of SARS-CoV-2 mRNA vaccines in patients with systemic lupus erythematosus (SLE) under Belimumab. Patients and methods: 12 patients on Belimumab and 13 age-matched healthy volunteers were recruited. Patients were in remission or in low disease activity, and they were taking no corticosteroids or only low doses. None of the patients and controls had detectable anti-SARS-CoV-2 antibodies due to previous exposure to the virus. All the patients received three doses of mRNA anti-SARS-CoV-2 vaccines and the humoral and cellular-mediated response were tested 4 weeks after the second dose (T0), 6 months after the second dose (T1) and 4 weeks after the third dose (T2). Comparison with the control group was performed at time T0 (i.e., 4 weeks after the second dose). Total anti-SARS-CoV-2 RBD antibodies were analyzed using a diagnostic assay, while cellular-mediated response was evaluated using the interferon-gamma release assay (IGRA). Results: A humoral response was documented in all the patients at T0 (median 459; IQR 225.25–758.5), but the antibody titer significantly declined from T0 to T1 (median 44.7; IQR: 30.3–202; p = 0.0066). At T2, the antibody titer significantly increased from T1 (median 2500; IQR: 2500–2500), and it was not different from T0 (respectively p < 0.0001, p = 0.66). Cellular-mediated response significantly declined from T0 to T1 (p = 0.003) but not from T0 to T2 (p = 0.3). No differences were found between patients and controls at T0 as regards both humoral and cellular responses (p = 1.0 and p = 0.09 for humoral and cellular responses, respectively). Conclusion: The third dose of mRNA COVID-19 vaccine can restore both humoral and cellular immune response in SLE patients on Belimumab

A new approach for alkali incorporation in Cu2ZnSnS4 solar cells

The addition of alkali elements has become mandatory for boosting solar cell performance in chalcogenide thin films based on kesterites (Cu2ZnSnS4, CZTS). A novel doping process is presented here, that consists in the incorporation of sodium or lithium during the deposition of the CdS buffer layer, followed by a post-deposition annealing (PDA). As the doping route leads to more efficient devices in comparison with the undoped reference sample, the influence of PDA temperature was also investigated. Compositional profiling techniques, time-of-flight secondary ion mass spectrometry (TOF-SIMS) and glow discharge optical mission spectroscopy (GDOES), revealed a dependence of the alkaline distribution in kesterites with the PDA temperature. Although the doping process is effective in that it increases the alkaline concentration compared to the undoped sample, the compositional profiles indicate that a significant proportion of Li and Na remains ‘trapped’ within the CdS layer. In the 200 °C-300 °C range the alkali profiles registered the higher concentration inside the kesterite. Despite this, an additional alkali accumulation close to the molybdenum/fluorine doped tin oxide substrate was found for all the samples, which is frequently related to alkali segregation at interfaces. The addition of both, lithium and sodium, improves the photovoltaic response compared to the undoped reference device. This is mainly explained by a substantial improvement in the open-circuit potential (V oc) of the cells, with best devices achieving efficiencies of 4.5% and 3% for lithium and sodium, respectively. Scanning-electron microscopy images depicted a ‘bilayer structure’ with larger grains at the top and small grains at the bottom in all samples. Moreover, the calculated bandgap energies of the CZTS films account for changes in the crystallographic order-disorder of the kesterites, more related to the PDA treatment rather than alkali incorporation. Even if further optimization of the absorber synthesis and doping process will be required, this investigation allowed the evaluation of a novel strategy for alkali incorporation in kesterite based solar cells.Fil: Valdes, Matias Hernan. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Hernandez, A.. Catalonia Institute For Energy Research Irec; EspañaFil: Sánchez, Y.. Catalonia Institute For Energy Research Irec; EspañaFil: Fonoll, R.. Catalonia Institute For Energy Research Irec; EspañaFil: Placidi, M.. Universidad Politécnica de Catalunya; España. Catalonia Institute For Energy Research Irec; EspañaFil: Izquierdo, V.. Catalonia Institute For Energy Research Irec; EspañaFil: Cabas Vidani, A.. Swiss Federal Laboratories for Materials Science and Technology; SuizaFil: Valentini, M.. Enea Centro Ricerche Casaccia; ItaliaFil: Mittiga, A.. Enea Centro Ricerche Casaccia; ItaliaFil: Pistor, P.. Universidad Pablo de Olavide; EspañaFil: Malerba, C.. Enea Centro Ricerche Casaccia; ItaliaFil: Saucedo, E.. Universidad Politécnica de Catalunya; Españ

Silicon photonics in Pirelli

Silicon is the dominant material in the microelectronic industry and silicon photonics is rapidly gaining importance as a technological platform for a wide range of applications in telecom, and optical interconnect. It allows the implementation of many photonic functions through the use of wafer-scale technologies normally used for advanced CMOS-processing. In this paper some of the most important issues toward a practical implementation of Silicon photonics into an industrial device will be addressed: low loss waveguides, polarization handling, tunability, hitless switching. A tunable Add-Drop multiplexer has been chosen as a case Study of a fully integrated device

Simulation of Single and Twin Impinging Jets in Cross-flow of VTOL Aircrafts (Review)

When operating near the ground beneath a Vertical/Short Take-Off and Landing (VSTOL) aircraft a complex turbulent 3D flow is generated. This flow field can be represented by the configuration of twin impinging jets in a cross-flow. Studying these jets is a significant parameter for the design of VTOL aircraft. This flowfield during very low speed or hover flight operations is very complex and time dependent. An important number of experimental researches and simulations have been carried out to be able to understand much better these flows related with powered lift vehicles. Computational Fluid Dynamics (CFD) approach will be used in this paper work for simulation purposes of a single and twin impinging jet through and without crossflow

Nodavirus colonizes and replicates in the testis of gilthead seabream and European sea bass modulating its immune and reproductive functions

Viruses are threatening pathogens for fish aquaculture. Some of them are transmitted through gonad fluids or gametes as occurs with nervous necrosis virus (NNV). In order to be transmitted through the gonad, the virus should colonize and replicate inside some cell types of this tissue and avoid the subsequent immune response locally. However, whether NNV colonizes the gonad, the cell types that are infected, and how the immune response in the gonad is regulated has never been studied. We have demonstrated for the first time the presence and localization of NNV into the testis after an experimental infection in the European sea bass (Dicentrarchus labrax), and in the gilthead seabream (Sparus aurata), a very susceptible and an asymptomatic host fish species, respectively. Thus, we localized in the testis viral RNA in both species using in situ PCR and viral proteins in gilthead seabream by immunohistochemistry, suggesting that males might also transmit the virus. In addition, we were able to isolate infective particles from the testis of both species demonstrating that NNV colonizes and replicates into the testis of both species. Blood contamination of the tissues sampled was discarded by completely fish bleeding, furthermore the in situ PCR and immunocytochemistry techniques never showed staining in blood vessels or cells. Moreover, we also determined how the immune and reproductive functions are affected comparing the effects in the testis with those found in the brain, the main target tissue of the virus. Interestingly, NNV triggered the immune response in the European sea bass but not in the gilthead seabream testis. Regarding reproductive functions, NNV infection alters 17β-estradiol and 11-ketotestosterone production and the potential sensitivity of brain and testis to these hormones, whereas there is no disruption of testicular functions according to several reproductive parameters. Moreover, we have also studied the NNV infection of the testis in vitro to assess local responses. Our in vitro results show that the changes observed on the expression of immune and reproductive genes in the testis of both species are different to those observed upon in vivo infections in most of the casesMINECO and FEDER (AGL2010-20801-C02-01; AGL2010-20801-C02-02; AGL2013-43588-P); Fundación Séneca (04538/GERM/06)Versión del editor4,411

Guidelines for the use and interpretation of assays for monitoring autophagy (4th edition)1.

In 2008, we published the first set of guidelines for standardizing research in autophagy. Since then, this topic has received increasing attention, and many scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Thus, it is important to formulate on a regular basis updated guidelines for monitoring autophagy in different organisms. Despite numerous reviews, there continues to be confusion regarding acceptable methods to evaluate autophagy, especially in multicellular eukaryotes. Here, we present a set of guidelines for investigators to select and interpret methods to examine autophagy and related processes, and for reviewers to provide realistic and reasonable critiques of reports that are focused on these processes. These guidelines are not meant to be a dogmatic set of rules, because the appropriateness of any assay largely depends on the question being asked and the system being used. Moreover, no individual assay is perfect for every situation, calling for the use of multiple techniques to properly monitor autophagy in each experimental setting. Finally, several core components of the autophagy machinery have been implicated in distinct autophagic processes (canonical and noncanonical autophagy), implying that genetic approaches to block autophagy should rely on targeting two or more autophagy-related genes that ideally participate in distinct steps of the pathway. Along similar lines, because multiple proteins involved in autophagy also regulate other cellular pathways including apoptosis, not all of them can be used as a specific marker for bona fide autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field