985 research outputs found
Optimal design for active damping in sandwich structures using the Direct MultiSearch method
This paper addresses the problem of optimal positioning of surface bonded piezoelectric patches in sandwich plates with viscoelastic core and laminated face layers. The objective is to maximize a set of modal loss factors for a given frequency range using multiobjective topology optimization. Active damping is introduced through co-located negative velocity feedback control. The multiobjective topology optimization problem is solved using the Direct MultiSearch Method. An application to a simply supported sandwich plate is presented with results for the maximization of the first six modal loss factors. The influence of the finite element mesh is analyzed and the results are, to some extent, compared with those obtained using alternative single objective optimization
Desenvolvimento neurocognitivo em 99 adolescentes e adultos com fenilcetonúria: ganhos em saúde resultantes de uma abordagem multidisciplinar
Identificação de parâmetros elásticos e piezoelétricos em estruturas activas tipo placa : técnicas de optimização clássica versus redes neuronais artificiais
Neste trabalho são apresentados dois métodos não destrutivos para a identificação de parâmetros elásticos e piezoeléctricos em estruturas laminadas activas do tipo placa, com sensores/actuadores de superfície. O primeiro destes métodos resolve o problema inverso através de métodos de optimização clássica, minimizando a diferença entre frequências naturais experimentais e as fornecidas por um modelo de elementos finitos. O segundo método baseia-se na construção de um “meta-modelo” do problema inverso, recorrendo a Redes Neuronais Artificiais. Os dois métodos são comparados recorrendo a resultados experimentais de uma placa em vibração livre
A numerical-experimental method for damage location based on rotation fields spatial differentiation
This paper presents a structural damage location method that decreases the number of spatial differentiations needed to compute modal curvature fields. The method is numerically and experimentally applied to isotropic and laminated rectangular plates, respectively. A speckle shear interferometer is used to measure the rotation fields of the laminated plate, while the isotropic plate is analysed by finite elements. It was found that the Gaussian differentiation is the most suited technique to compute the curvature fields. It is also demonstrated the superior performance of the curvature method using measured rotation fields instead of measured displacement fields
Damage localization in laminated composite plates using mode shapes measured by pulsed TV holography
Three methods for the damage localization of impact damage in laminated composite plates, based on their vibrational characteristics, are presented in this paper. These methods use double pulse TV holography with acoustic excitation for mode shapes acquisition and the differences in translations, rotations and curvatures. The rotations and curvatures are obtained by numerical differentiation of mode shapes translations using a differentiation/smoothing technique. The methods are applied to a carbon fiber reinforced epoxy rectangular plate, free in space, subjected to two cases of impact damage. It is shown that the method based on curvatures allows the localization of both cases of damage, which can be undetected by visual, X-ray or C-scan inspections. The best localizations are achieved by selecting and applying the method to the most changed mode.Three methods for the damage localization of impact damage in laminated composite plates, based on their vibrational characteristics, are presented in this paper. These methods use double pulse TV holography with acoustic excitation for mode shapes acquisition and the differences in translations, rotations and curvatures. The rotations and curvatures are obtained by numerical differentiation of mode shapes translations using a differentiation/smoothing technique. The methods are applied to a carbon fiber reinforced epoxy rectangular plate, free in space, subjected to two cases of impact damage. It is shown that the method based on curvatures allows the localization of both cases of damage, which can be undetected by visual, X-ray or C-scan inspections. The best localizations are achieved by selecting and applying the method to the most changed mode
Damage localization in laminated composite plates using double pulse-electronic holographic interferometry
One method for the damage localization of impact damage in laminated composite
plates, based on their vibrational characteristics, is presented in this paper. This method uses double pulse-electronic holographic interferometry for mode shapes acquisition and the differences in curvatures. The rotations and curvatures are numerically obtained. The method is applied to a carbon fibre reinforced epoxy rectangular plate, free in space, subjected to two cases of impact damage. It is shown that the method based on curvatures allows for the localization of both cases of damage, which can be undetected by visual, X-ray or C-Scan inspections. The best localizations are achieved by selecting and applying the method to the most changed mode
Genotype-specific growth and proteomic responses of maize toward salt stress
Salt stress in plants triggers complex physiological responses that are genotype specific. Many of these responses are either not yet described or not fully understood or both. In this work, we phenotyped three maize genotypes of the CIMMYT gene bank alongside the reference B73 genotype (NCRPIS – United States) under both control and salt-stressed conditions. We have ranked their growth potential and we observed significant differences in Na+ and Cl- ion accumulation. Genotype CML421 showed the slowest growth, while CML451 had the lowest accumulation of ions in its leaves. The phenotyping defined the right timing for the proteomics analysis, allowing us to compare the contrasting genotypes. In general 1,747 proteins were identified, of which 209 were significantly more abundant in response to salt stress. The five most significantly enriched annotations that positively correlated with stress were oxidation reduction, catabolic process, response to chemical stimulus, translational elongation and response to water. We observed a higher abundance of proteins involved in reactions to oxidative stress, dehydration, respiration, and translation. The five most significantly enriched annotations negatively correlated with stress were nucleosome organization, chromatin assembly, protein-DNA complex assembly, DNA packaging and nucleosome assembly. The genotypic analysis revealed 52 proteins that were correlated to the slow-growing genotype CML421. Their annotations point toward cellular dehydration and oxidative stress. Three root proteins correlated to the CML451 genotype were annotated to protein synthesis and ion compartmentalization. In conclusion, our results highlight the importance of the anti-oxidative system for acclimatization to salt stress and identify potential genotypic marker proteins involved in salt-stress responses
Corrosion behaviour of WC hardmetals with nickel - based binders
Cobalt is the standard binder in tungsten carbide (WC) hardmetals due to its compatibility with the WC phase, resulting in composites with exceptional hardness and wear resistance. However, their corrosion resistance is not satisfactory in many applications, leading to the early deterioration and failure of tools and equipment.
In this work, the corrosion of WC hardmetals with three alternative binders (FeCoNi, NiCrCoMo and NiCrMo) is compared with a benchmark WC-Co composite, using electrochemical techniques such as open circuit potential (OCP) monitoring, polarisation curves and electrochemical impedance spectroscopy (EIS), assisted by scanning electron microscopy (SEM).publishe
Nanomaterials for Advancing the Health Immunosensor
Nanotechnology has exerted a significant impact in the development of biosensors allowing more sensible analytical methods. In health applications, the main challenge of the immunoassay is to reach the suitable limit of detection, recognizing different analytes in complex samples like whole blood, serum, urine, and other biological fluids. Different nanomaterials, including metallic, silica and magnetic nanoparticles, quantum dots, carbon nanotubes, and graphene, have been applied, mainly to improve charge electron transfer, catalytic activity, amount of immobilized biomolecules, low-background current, signal-to-noise ratio that consequently increase the sensitivity of immunosensors. Given the great impact of nanotechnology, this chapter intends to discuss new aspects of nanomaterials relating to immunosensor advancement
Alguns aspectos fundamentais da defesa fitossanitária dos produtos armazenados em Moçambique. I. Inventário faunístico
info:eu-repo/semantics/publishedVersio
- …