Non parametric reconstruction of distribution functions from observed galactic disks

A general inversion technique for the recovery of the underlying distribution function for observed galactic disks is presented and illustrated. Under the assumption that these disks are axi-symmetric and thin, the proposed method yields the unique distribution compatible with all the observables available. The derivation may be carried out from the measurement of the azimuthal velocity distribution arising from positioning the slit of a spectrograph along the major axis of the galaxy. More generally, it may account for the simultaneous measurements of velocity distributions corresponding to slits presenting arbitrary orientations with respect to the major axis. The approach is non-parametric, i.e. it does not rely on a particular algebraic model for the distribution function. Special care is taken to account for the fraction of counter-rotating stars which strongly affects the stability of the disk. An optimisation algorithm is devised -- generalising the work of Skilling & Bryan (1984) -- to carry this truly two-dimensional ill-conditioned inversion efficiently. The performances of the overall inversion technique with respect to the noise level and truncation in the data set is investigated with simulated data. Reliable results are obtained up to a mean signal to noise ratio of~5 and when measurements are available up to $4 R_{e}$. A discussion of the residual biases involved in non parametric inversions is presented. Prospects of application to observed galaxies and other inversion problems are discussed.Comment: 11 pages, 13 figures; accepted for publication by MNRA

Hands-On TAROT: Intercontinental use of the TAROT for Education and Public Outreach

The TAROT telescope has for primary goal the search for the prompt optical counterpart of Cosmic Gamma-Ray Bursts. It is a completely autonomous 25cm telescope installed near Nice (France), able to point any location of the sky within 1-2 seconds. The control, scheduling, and data processing activities are completely automated, so the instrument is completely autonomous. In addition to its un-manned modes, we added recently the possibility to remotely control the telescope, as a request of the "Hands-On Universe" (HOU) program for exchange of time within automatic telescopes for the education and public outreach. To this purpose we developed a simple control interface. A webcam was installed to visualize the telescope. Access to the data is possible through a web interface. The images can be processed by the HOU software, a program specially suited for use within the classroom. We experienced these feature during the open days of the University of California Berkeley and the Astronomy Festival of Fleurance (France). We plan a regular use for an astronomy course of the Museum of Tokyo, as well as for French schools. Not only does Hands-On TAROT gives the general public an access to professional astronomy, but it is also a more general tool to demonstrate the use of a complex automated system, the techniques of data processing and automation. Last but not least, through the use of telescopes located in many countries over the globe, a form of powerful and genuine cooperation between teachers and children from various countries is promoted, with a clear educational goal.Comment: 4 pages, Based on a demonstration presented at the ADASS X Conference, Boston, MA, USA, October 2000, to appear in ASP Conf. Serie

A certification method for the milling process of free-form surfaces using a test part

International audienceIt is generally admitted that the manufacturing of free-form surfaces requires the use of a CAD-CAM system. The toolpath accuracy and the dimensional quality of the final shape have to be in accordance with the geometrical specifications. But most of the time, the final parts present deviations from the expected shape. These deviations may be due to either the toolpath calculation (CAM system) or the cutting process itself. In the paper, we propose an analysis of the whole milling process to point out the possible sources of errors. These errors generally lead to geometrical deviations and the final part does not meet the required specifications. As the errors can be linked to geometrical particularities of the shape, we propose a test part associated with check means to bring out problems. The milling of this part using two different techniques of toolpath generation shows that obviously both toolpaths are not error-free and that errors result from different geometrical particularities of the part surfaces

Evaluating Terra MODIS Satellite Sensor Data Products for Maize Yield Estimation in South Africa

The Free State Province of the Republic of South Africa contains some of the most important maize-producing areas in South Africa. For this reason this province has also been selected as a Joint Experiment for Crop Assessment and Monitoring (JECAM, 2012) site representative of South Africa.The Terra (EOS AM-1) research satellite carries the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. Two data products which are used in this research, created by the National Aeronautics and Space Administration (NASA) from the MODIS sensor, are the Normalised Difference Vegetation Index (NDVI) and the Enhanced Vegetation Index (EVI).Objective yield points (OYP) are Global Positioning Points (GPS) that fieldworkers visit to record certain yield related data, including a final objective yield. Three research studies utilizing Terra MODIS data were performed. Study one utilised objective yields from the 2001/2002, 2004/2005 and 2005/2006 growth seasons for three provinces in South Africa. In study two, the 2006/2007 growth season OYP were extracted for the Free State province only. NDVI was downloaded from United States Geological Survey (USGS) for study one and two and extracted into a GIS for comparison with the OYP. For the Free State pilot study, study three, OYP from the 2001 to 2010 growth seasons were used. MODIS NDVI and EVI data were obtained from the Wide Area Monitoring Information System WAMIS portal for the data set of 35 points.Statistical analysis was done on the data of studies two and three. The 2006/2007 dataset yielded a R2 of 0.47 for all 225 points and 0.51 for the medium growth cultivar data only (186 data points), while the 2001 to 2010 growth season yielded an R2 of 0.63 for the medium yield group. Therefore it is concluded that Terra MODIS NDVI and EVI data can be utilized for maize yield estimation on points

Invitación a la filosofía . un modo de pensar el mundo y la vida.

Bogotá: Siglo del Hombre Editores- Pontificia Universidad Javeriana, 2008. 259 pp

Importance of the catalytic effect of the substrate in the functionality of lubricant additives: the case of MoDTC

Molybdenum dithiocarbamates (MoDTCs) are lubricant additives very efficient in reducing the friction of steel and they are employed in a number of industrial applications. The functionality of these additives is ruled by the chemical interactions occurring at the buried sliding interface, which are of key importance for the improvement of the lubrication performance. Yet, these tribochemical processes are very difficult to monitor in real time. Ab initio molecular dynamics simulations are the ideal tool to shed light into such a complicated reactivity. In this work we perform ab initio simulations, both in static and tribological conditions, to understand the effect of surface oxidation on the tribochemical reactivity of MoDTC and we find that when the surfaces are covered by oxygen, the first dissociative steps of the additives are significantly hindered. Our preliminary tribological tests on oxidized steel discs support these results. Bare metallic surfaces are necessary for a stable adsorption of the additives, their quick decomposition, and the formation of a durable MoS$_2$ tribolayer. This work demonstrates the importance of the catalytic role of the substrate and confirms the full capability of the computational protocol in the pursuit of materials and compounds more efficient in reducing friction

Genome-wide identification of microRNA and siRNA responsive to endophytic beneficial diazotrophic bacteria in maize

Background: Small RNA (sRNA) has been described as a regulator of gene expression. In order to understand the role of maize sRNA (Zea mays - hybrid UENF 506-8) during association with endophytic nitrogen-fixing bacteria, we analyzed the sRNA regulated by its association with two diazotrophic bacteria, Herbaspirillum seropedicae and Azospirillum brasilense. Results: Deep sequencing analysis was done with RNA extracted from plants inoculated with H. seropedicae, allowing the identification of miRNA and siRNA. A total of 25 conserved miRNA families and 15 novel miRNAs were identified. A dynamic regulation in response to inoculation was also observed. A hypothetical model involving copper-miRNA is proposed, emphasizing the fact that the up-regulation of miR397, miR398, miR408 and miR528, which is followed by inhibition of their targets, can facilitate association with diazotrophic bacteria. Similar expression patterns were observed in samples inoculated with A. brasilense. Moreover, novel miRNA and siRNA were classified in the Transposable Elements (TE) database, and an enrichment of siRNA aligned with TE was observed in the inoculated samples. In addition, an increase in 24-nt siRNA mapping to genes was observed, which was correlated with an increase in methylation of the coding regions and a subsequent reduction in transcription. Conclusion: Our results show that maize has RNA-based silencing mechanisms that can trigger specific responses when plants interact with beneficial endophytic diazotrophic bacteria. Our findings suggest important roles for sRNA regulation in maize, and probably in other plants, during association with diazotrophic bacteria, emphasizing the up-regulation of Cu-miRNA