Forecasting the air pollution episode potential in the Canary Islands

International audienceIn the frame of the WMO Global Atmosphere Watch Urban Research Meteorology and Environment programme (GURME), a system for forecasting air pollution episode potential in the Canary Islands has been developed. Meteorological parameters relevant to air quality (synoptic wind speed, wind direction, boundary layer height and temperature at 91 vertical levels) are obtained from the European Centre for Medium range Weather Forecasting (ECMWF) once a day for up to four days ahead. In addition, a model based on the analogue method utilising six years of historical meteorological and air quality data predicts the probability of SO2 concentration exceeding certain thresholds for a measurement station located in Santa Cruz de Tenerife. Meteorological forecasts are also provided from a high resolution (2 km) local area model (MM5) implemented for the Canary Islands domain. This simple system is able to forecast meteorological conditions which are favourable to the occurrence of pollution episodes for the forthcoming days

New insights from zinc and copper isotopic compositions of atmospheric particulate matter from two major European cities

This study reports spatial and temporal variability of Zn and Cu isotopes in atmospheric particulate matter (PM) collected in two major European cities with contrasting atmospheric pollution, Barcelona and London. We demonstrate that non-traditional stable isotopes identify source contributions of Zn and Cu and can play a major role in future air quality studies. In Barcelona, fine PM were collected at street level at sites with variable traffic density. The isotopic signatures ranged between −0.13±0.09 and −0.55±0.09‰ for d66ZnIRMM and between +0.04±0.20 and +0.33±0.15‰ for d65CuAE633. Copper isotope signatures similar to Cu sulphides and Cu/Sb ratios within the range typically found in brake wear suggest that non-exhaust emissions from vehicles are dominant. Negative Zn isotopic signatures characteristic for gaseous emissions from smelting and combustion and large enrichments of Zn and Cd suggest contribution from metallurgical industries. In London, coarse PM collected on the top of a building over 18 months display isotope signatures ranging between +0.03±0.04 and +0.49±0.02‰ for d66ZnIRMM and between +0.37±0.17 and +0.97±0.21‰ for d65CuAE633. Heavy Cu isotope signatures (up to +0.97±0.21‰) and higher enrichments and Cu/Sb ratios during winter time suggest important contribution from fossil fuel combustion. The positive d66ZnIRMM signatures are in good agreement with signatures characteristic for ore concentrates used for the production of tires and galvanised materials, suggesting non-exhaust emissions from vehicles as the main source of Zn

A numerical approach for liquefaction potential definition

Liquefaction phenomenon in saturated granular soil is not that frequent as amplification cases but can cause heavy damages on buildings and infrastructures whenever is occurs especially within superficial strata. In fact the lack of shear resistance of soil due to liquefaction affects mostly shallow foundations and road surfaces. Up now, several studies have been addressed to overpass the inadequacy of liquefaction safety factor by means of introducing the liquefaction potential. Nevertheless, the difficulty in (1) defining a scale of damage related to liquefaction potential values and (2) collecting field data from damages caused prevalently by liquefaction makes the punctual factor of safety still popular in engineering practice. In this paper a new approach to liquefaction potential estimation is proposed based on finite element dynamic analyses and on the concept of “significant volume” according to possible effects suffered by shallow foundations. One-dimensional simulation of liquefaction occurrence is performed by means of the Pastor-Zienkiewicz constitutive law. Hence the estimation of liquefaction potential is gained as well as the stress influence factor from Westergaard solution is calculated

Cord blood Lin(-)CD45(-) embryonic-like stem cells are a heterogeneous population that lack self-renewal capacity.

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.Human umbilical cord blood (hUCB) has been proposed to contain not only haematopoietic stem cells, but also a rare pluripotent embryonic-like stem cell (ELSc) population that is negative for hematopoietic markers (Lin(-)CD45(-)) and expresses markers typical of pluripotent cells. The aim of this work was to isolate, characterise and expand this ELSc fraction from hUCB, as it may provide a valuable cell source for regenerative medicine applications. We found that we could indeed isolate a Lin(-)CD45(-) population of small cells (3-10 µm diameter) with a high nucleus to cytoplasm ratio that expressed the stem cell markers CD34 and CXCR4. However, in contrast to some previous reports, this fraction was not positive for CD133. Furthermore, although these cells expressed transcripts typical of pluripotent cells, such as SOX2, OCT3/4, and NANOG, they were not able to proliferate in any of the culture media known to support stem cell growth that we tested. Further analysis of the Lin(-)CD45(-) population by flow cytometry showed the presence of a Lin(-)CD45(-)Nestin(+) population that were also positive for CD34 (20%) but negative for CXCR4. These data suggest that the Lin(-)CD45(-) stem cell fraction present in the cord blood represents a small heterogeneous population with phenotypic characteristics of stem cells, including a Lin(-)CD45(-)Nestin(+) population not previously described. This study also suggests that heterogeneity within the Lin(-)CD45(-) cell fraction is the likely explanation for differences in the hUCB cell populations described by different groups that were isolated using different methods. These populations have been widely called "embryonic-like stem cell" on the basis of their phenotypical similarity to embryonic stem cells. However, the fact they do not seem to be able to self-renew casts some doubt on their identity, and warns against defining them as "embryonic-like stem cell" at this stage.Anthony Nolan and the Great Ormond Street Hospital Charity for financial support. Cesar Alvarez-Gonzalez is a fellowship from Consejo Nacional de Ciencia y Tecnologia (CONACyT) and Instituto Jaliscience de la Juventud (IJJ); Mexico

Diagnostic challenges in chronic inflammatory demyelinating polyradiculoneuropathy

Chronic inflammatory demyelinating polyradiculoneuropathy (CIDP) consists of a spectrum of autoimmune diseases of the peripheral nerves, causing weakness and sensory symptoms. Diagnosis often is challenging, because of the heterogeneous presentation and both mis- and underdiagnosis are common. Nerve conduction study (NCS) abnormalities suggestive of demyelination are mandatory to fulfil the diagnostic criteria. On the one hand, performance and interpretation of NCS can be difficult and none of these demyelinating findings are specific for CIDP. On the other hand, not all patients will be detected despite the relatively high sensitivity of NCS abnormalities. The electrodiagnostic criteria can be supplemented with additional diagnostic tests such as CSF examination, MRI, nerve biopsy, and somatosensory evoked potentials. However, the evidence for each of these additional diagnostic tests is limited. Studies are often small without the use of a clinically relevant control group. None of the findings are specific for CIDP, meaning that the results of the diagnostic tests should be carefully interpreted. In this update we will discuss the pitfalls in diagnosing CIDP and the value of newly introduced diagnostic tests such as nerve ultrasound and testing for autoantibodies, which are not yet part of the guidelines

Historical earthquake parameters by geological and seismic site analysis: the 1908 Cerbon earthquake (Spain)

Seismic catalogues summarize information mainly on recent earthquakes and seismic events, recorded by means of relatively new instruments. Hence, this information, although being of high quality and quantitative value, sometimes is rather incomplete, since historical earthquakes are neglected in many cases. An example is the 1908 Cerbón earthquake (in Spain). This shake caused a good number of effects in the epicentre and surrounding area, triggering a huge landslide among some other effects. A complete geological and seismic site analysis, accompanied by a historical review of testimonies and journals of the time describing this particular earthquake, has been carried out, along with a deep field investigation to identify the mechanism of this landslide and the characteristics of the involved materials. A retrospective pseudo-static numerical simulation has been carried out to calculate the most probable range of peak horizontal accelerations during the earthquake. The results demonstrate the moderate relevance of this shake, also allowing us to quantify its objective importance. The presented methodology can be easily extended to some other similar cases, if seismic catalogues are to be completed for future designs accounting for seismic considerations

Characteristics of ash and particle emissions during bubbling fluidised bed combustion of three types of residual forest biomass

Combustion of residual forest biomass (RFB) derived from eucalypt (Eucalyptus globulus), pine (Pinus pinaster) and golden wattle (Acacia longifolia) was evaluated in a pilot-scale bubbling fluidised bed reactor (BFBR). During the combustion experiments, monitoring of temperature, pressure and exhaust gas composition has been made. Ash samples were collected at several locations along the furnace and flue gas treatment devices (cyclone and bag filter) after each combustion experiment and were analysed for their unburnt carbon content and chemical composition. Total suspended particles (TSP) in the combustion flue gas were evaluated at the inlet and outlet of cyclone and baghouse filter and further analysed for organic and elemental carbon, carbonates and 57 chemical elements. High particulate matter collection efficiencies in the range of 94-99% were observed for the baghouse, while removal rates of only 1.4-17% were registered for the cyclone. Due to the sand bed, Si was the major element in bottom ashes. Fly ashes, in particular those from eucalypt combustion, were especially rich in CaO, followed by relevant amounts of SiO2, MgO and K2O. Ash characteristics varied among experiments, showing that their inorganic composition strongly depends on both the biomass composition and combustion conditions. Inorganic constituents accounted for TSP mass fractions up to 40 wt%. Elemental carbon, organic matter and carbonates contributed to TSP mass fractions in the ranges 0.58-44%, 0.79-78% and 0.01-1.7%, respectively.publishe

Quantitative assessment of the variability in chemical profiles from source apportionment analysis of PM10 and PM2.5 at different sites within a large metropolitan area

The study aims to assess the differences between the chemical profiles of the major anthropogenic and natural PM sources in two areas with different levels of urbanization and traffic density within the same urban agglomeration. A traffic site and an urban background site in the Athens Metropolitan Area have been selected for this comparison. For both sites, eight sources were identified, with seven of them being common for the two sites (Mineral Dust, non-Exhaust Emissions, Exhaust Emissions, Heavy Oil Combustion, Sulfates & Organics, Sea Salt and Biomass Burning) and one, site-specific (Nitrates for the traffic site and Aged Sea Salt for the urban background site). The similarity between the source profiles was quantified using two statistical analysis tools, Pearson correlation (PC) and Standardized Identity Distance (SID). According to Pearson coefficients five out of the eight source profiles present high (PC > 0.8) correlation (Mineral Dust, Biomass Burning, Sea Salt, Sulfates and Heavy Oil Combustion), one presented moderate (0.8 > PC > 0.6) correlation (Exhaust) and two low/no (PC < 0.6) correlation (non-Exhaust, Nitrates/Aged Sea Salt). The source profiles that appear to be more correlated are those of sources that are not expected to have high spatial variability because there are either natural/secondary and thus have a regional character or are emitted outside the urban agglomeration and are transported to both sites. According to SID four out of the eight sources have high statistical correlation (SID < 1) in the two sites (Mineral Dust, Sea salt, Sulfates, Heavy Oil Combustion). Biomass Burning was found to be the source that yielded different results from the two methodologies. The careful examination of the source profile of that source revealed the reason for this discrepancy. SID takes all the species of the profile equally into account, while PC might be disproportionally affected by a few numbers of species with very high concentrations. It is suggested, based on the findings of this work, that the combined use of both tools can lead the users to a thorough evaluation of the similarity of source profiles. This work is, to the best of our knowledge, the first time a study is focused on the quantitative comparison of the source profiles for sites inside the same urban agglomeration using statistical indicators.The study was supported by “CALIBRA/EYIE” (MIS 5002799) and “PANhellenic infrastructure for Atmospheric Composition and climatE change” (MIS 5021516) implemented under the Action “Reinforcement of the Research and Innovation Infrastructure”, funded by the Operational Programme “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund). Collection and chemical analysis of samples were supported by LIFE + AIRUSE EU project (ENV/ES/584). Partial support was also received by H2020 ERAPLANET/SMURBS ERANET GA No 689443.Peer reviewe

Physical and chemical properties of non-exhaust particles generated from wear between pavements and tyres

A road simulator was used to generate wear particles from the interaction between two tyre brands and a composite pavement. Particle size distributions were monitored using a scanning mobility particle sizer and an aerosol particle sizer. Continuous measurements of particle mass concentrations were also made. Collection of inhalable particles (PM10) was conducted using a high-volume sampler equipped with quartz filters, which were then analysed for organic and elemental carbon, organic constituents and elemental composition. Tyre fragments chopped into tiny chips were also subjected to detailed organic and elemental speciation. The number concentration was dominated by particles 0.5 μm. The emission factor from wear between pavements and tyres was of the order of 2 mg km−1 veh−1. Organic carbon represented about 10% of the PM10 mass, encompassing multiple aliphatic compounds (n-alkanes, alkenes, hopanes, and steranes), PAHs, thiazols, n-alkanols, polyols, some fragrant compounds, sugars, triterpenoids, sterols, phenolic constituents, phthalate plasticisers and several types of acids, among others. The relationship between airborne particulate organic constituents and organic matter in tyre debris is discussed. The detection of compounds that have been extensively used as biomass burning tracers (e.g. retene, dehydroabietic acid and levoglucosan) in both the shredded tiny tyre chips and the wear particles from the interaction between tyres and pavement puts into question their uniqueness as markers of wood combustion. Trace and major elements accounted for about 5% of the mass of the tyre fragments but represented 15–18% of the PM10 from wear, denoting the contribution of mineral elements from the pavement. Sulphur and zinc were abundant constituents in all samples.publishe

Ultrafine and nanoparticle formation and emission mechanisms during laser processing of ceramic materials

The use of laser technology in the ceramic industry is undergoing an increasing trend, as it improves surface properties. The present work aimed to assess ultrafine and nanoparticle emissions from two different types of laser treatments (tile sintering and ablation) applied to two types of tiles. New particle formation mechanisms were identified, as well as primary nanoparticle emissions, with concentrations reaching up to 6.7 x 10(6) particles Cm-3 and a mean diameter of 18 nm. Nanoparticle emission patterns were strongly dependent on temperature and raw tile chemical composition. Nucleation events were detected during the thermal treatment independently of the laser application. TOM images evidenced spherical ultrafine particles, originating from the tile melting processes. When transported across the indoor environment, particles increased in size (up to 38 nm) with concentrations remaining high (2.3 x 10(6) particles cm(-3)), Concentrations of metals such as Zn, Pb, Cu, Cr, As and al were found in particles < 250 nm