A preliminary design and implementation of the low-thrust simulation and trajectory search program (LOWTRAJ)

The results are presented of one phase of research conducted for the JPL Solar Electric Propulsion (SEP) Navigation Software System development program. It deals only with the problem of designing the flight quality trajectory program, which is a major subset of the entire navigation software system. In this phase of research (breadboard development phase), attempts were made to assess the SEP trajectory software functional requirements, to investigate the program design method satisfying these requirements, to identify the primary anticipated problem areas, and to provide solutions to these problem areas. These efforts culminated in the development of a compact breadboard program. A functional description and the mathematical formulation of the program are presented

A New Layer Casting System for Ceramic Laser Rapid Prototyping Apparatus

In the existing Ceramic Laser Fusion system, slurry is fed on the high temperature surface of the green part; therefore, a part of water infiltrates into the green block and vaporizes before the process of layer casting. As a result, the slurry viscosity rises gradually; the quality of the layer surface is not uniform, and the green part density is uneven. The aim of present study is to develop a new layer casting system which can solve the problems mentioned above to obtain a green part with uniform surface quality and density, and to shorten the time-taken of part fabrication. The first part of the paper illustrates the major requirements and parameters of a slurry distributor; the second part describes the integration of the slurry feeding device and layer casting system. The integrated system can feed slurry and cast thin layer simultaneously; consequently, the drawbacks of the existing system can be eliminated and the time-taken of the layer casting can be shortened. A variable-frequency drive (inverter) is used to control the motor speed. The relation between the frequency and the slurry delivery can be included in the process control program to adjust the quantity in accordance with the layer thickness; hence, the waste of the slurry can be reduced.Mechanical Engineerin

Gait Verification using Knee Acceleration Signals

A novel gait recognition method for biometric applications is proposed. The approach has the following distinct features. First, gait patterns are determined via knee acceleration signals, circumventing difficulties associated with conventional vision-based gait recognition methods. Second, an automatic procedure to extract gait features from acceleration signals is developed that employs a multiple-template classification method. Consequently, the proposed approach can adjust the sensitivity and specificity of the gait recognition system with great flexibility. Experimental results from 35 subjects demonstrate the potential of the approach for successful recognition. By setting sensitivity to be 0.95 and 0.90, the resulting specificity ranges from 1 to 0.783 and 1.00 to 0.945, respectively

Correlation of the orbach relaxation coefficient with optical linewidths- laf3-er3 plus

Correlation of Orbach coefficient of spin-lattice relaxation with optical transition linewidths for trivalent erbium in lanthanum fluorid

AN ECONOMETRIC ANALYSIS OF DONATIONS FOR ENVIRONMENTAL CONSERVATION IN CANADA

As provincial governments in Canada trim budgets, fewer funds are available for environmental conservation programs. Many jurisdictions are letting private interests and/or users of the resource base help fund conservation projects. Thus funding for conservation is becoming more dependent on donations to environmental causes either through direct giving of funds or through memberships in organizations. This study explores some determinants of private contributions to environmental conservation activities through an econometric analysis of donations and memberships relating to wildlife habitat protection and enhancement. We use data from a 1991 survey conducted in the three prairie provinces that provides information on donation behavior, income, wildlife-related activity, household compositions, and a variety of other factors. A double-hurdle econometric model is used to allow independent variables to have different effects on the probability of donations and the level of donations. Our empirical results suggest that changes in the economy will be important to donation behavior. Declines in participation and recruitment in hunting will also have impacts on donations to conservation causes, but these impacts, although significant, may not be as large. However, consumptive and nonconsumptive activities may be influenced by management agencies and used to bolster environmental donations.Environmental Economics and Policy,

SPAR demonstration problems

A series of examples are presented to indicate some of the principal functions of the SPAR system and to illustrate SPAR's control card-data card structure. Information in the following categories is given: (1) a description of the problem and, in most cases, comparisons with analytical solutions; (2) a list of the input cards; (3) a printout of the table of contents of the direct access library into which all SPAR output was directed; and (4) a few representative plots

The Characteristics and Applications of Ceramic Laser Fusion and Ceramic Laser Sintering

The aim of present study is to investigate the possible application of the ceramic parts which are fabricated with the process of Ceramic Laser Fusion or Ceramic Laser Sintering. The experimental results reveal: (1) CLF can lead to a reduction in the porosity of the ceramic part but also can induce micro-cracks. Therefore, this process cannot produce a part with the required strength by a post-process of infiltration; (2) CLS is capable of fabricating a ceramic part with high porosity. By adjusting the slurry formulation and varying the scanning energy, the open porosity can be over 90vol% of the total porosity. After a post-process of infiltration, the density can be increased to 95%; therefore, CLS can apply to produce a part with high strength. Because the high open porosity leads to a good permeability, the process of CLS is suitable for the fabrication of ceramic shell mold.Mechanical Engineerin

Long-term X-ray Variability of Ultraluminous X-ray Sources

Long-term X-ray modulations on timescales from tens to hundreds of days have been widely studied for X-ray binaries located in the Milky Way and the Magellanic Clouds. For other nearby galaxies, only the most luminous X-ray sources can be monitored with dedicated observations. We here present the first systematic study of long-term X-ray variability of four ultraluminous X-ray sources (ESO 243-49 HLX-1, Holmberg IX X-1, M81 X-6, and NGC 5408 X-1) monitored with Swift. By using various dynamic techniques to analyse their light curves, we find several interesting low-frequency quasi-periodicities. Although the periodic signals may not represent any stable orbital modulations, these detections reveal that such long-term regular patterns may be related to superorbital periods and structure of the accretion discs. In particular, we show that the outburst recurrence time of ESO 243-49 HLX-1 varies over time and suggest that it may not be the orbital period. Instead, it may be due to some kinds of precession, and the true binary period is expected to be much shorter.Comment: 15 pages, 8 figures; accepted for publication in MNRA

Earthmoving construction automation with military applications: Past, present and future

© ISARC 2018 - 35th International Symposium on Automation and Robotics in Construction and International AEC/FM Hackathon: The Future of Building Things. All rights reserved. Amongst increasing innovations in frontier engineering sciences, the advancements in Robotic and Autonomous Systems (RAS) has brought about a new horizon in construction applications. There is evidence of the increasing interest in RAS technologies in the civil construction sector being reflected in construction efforts of many military forces. In particular, Army or ground-based forces are frequently called upon to conduct construction tasks as part of military operations, tasks which could be partially or fully aided by the employment of RAS technologies. Along with recent advances in the Internet of Things (IoT) and cyber-physical system infrastructure, it is essential to examine the current maturity, technical feasibility, and affordability, as well as the challenges and future directions of the adoption and application of RAS to military construction. This paper presents a comprehensive survey and provides a contemporary and industry-independent overview on the state-of-the-art of earthmoving construction automation used in defence, spanning current world’s best practice through to that which is predicted over the coming years

Discovery of X-ray pulsations from "next Geminga" - PSR J1836+5925

We report the X-ray pulsation of ~173.3 ms for the "next Geminga", PSR J1836+5925, with recent XMM-Newton investigations. The X-ray periodicity is consistent wtih the gamma-ray ephemeris at the same epoch. The X-ray folded light curve has a sinusoidal structure which is different from the double-peaked gamma-ray pulse profile. We have also analysed the X-ray phase-averaged spectra which shows the X-ray emission from PSR J1836+5925 is thermal dominant. This suggests the X-ray pulsation mainly originates from the modulated hot spot on the stellar surface.Comment: 7 pages, 3 figures, 1 table, accepted for publication in ApJ Lette