The aim of present study is to investigate the possible application of the ceramic parts
which are fabricated with the process of Ceramic Laser Fusion or Ceramic Laser Sintering.
The experimental results reveal: (1) CLF can lead to a reduction in the porosity of the
ceramic part but also can induce micro-cracks. Therefore, this process cannot produce a part
with the required strength by a post-process of infiltration; (2) CLS is capable of fabricating a
ceramic part with high porosity. By adjusting the slurry formulation and varying the scanning
energy, the open porosity can be over 90vol% of the total porosity. After a post-process of
infiltration, the density can be increased to 95%; therefore, CLS can apply to produce a part
with high strength. Because the high open porosity leads to a good permeability, the process
of CLS is suitable for the fabrication of ceramic shell mold.Mechanical Engineerin
