3,048 research outputs found
The transport history of two Saharan dust events archived in an Alpine ice core
International audienceMineral dust from the Saharan desert can be transported across the Mediterranean towards the Alpine region several times a year. When coinciding with snowfall, the dust can be deposited on Alpine glaciers and then appears as yellow or red layers in ice cores. Two such significant dust events were identified in an ice core drilled at the high-accumulation site Piz Zupó in the Swiss Alps (46°22' N, 9°55' E, 3850 m a.s.l.). From stable oxygen isotopes and major ion concentrations, the events were approximately dated as October and March 2000. In order to link the dust record in the ice core to the meteorological situation that led to the dust events, a novel methodology based on back-trajectory analysis was developed. It allowed the detailed analysis of the specific meteorologic flow evolution that was associated with Saharan dust transport into the Alps, and the identification of dust sources, atmospheric transport paths, and wet deposition periods for both dust events. Differences in the chemical signature of the two dust events were interpreted with respect to contributions from the dust sources and aerosol scavenging during the transport. For the October event, the trajectory analysis indicated that dust deposition took place during 13?15 October 2000. Mobilisation areas of dust were mainly identified in the Algerian and Libyan deserts. A combination of an upper-level potential vorticity streamer and a midlevel jet across Algeria first brought moist Atlantic air and later mixed air from the tropics and Saharan desert across the Mediterranean towards the Alps. The March event consisted of two different deposition phases which took place during 17?19 and 23?25 March 2000. The first phase was associated with an exceptional transport pathway past Iceland and towards the Alps from northerly directions. The second phase was similar to the October event. A significant peak of methanesulphonic acid associated with the March dust event was most likely caused by incorporation of biogenic aerosol while passing through the marine boundary layer of the western Mediterranean during a local phytoplankton bloom. From this study, we conclude that for a detailed understanding of the chemical signal recorded in dust events at Piz Zupó, it is essential to consider the whole transport sequence of mineral aerosol, consisting of dust mobilisation, transport, and deposition at the glacier
Lightning-produced NO<sub>x</sub> over Brazil during TROCCINOX: Airborne measurements in tropical and subtropical thunderstorms and the importance of mesoscale convective systems
International audienceDuring the TROCCINOX field experiments in February?March 2004 and February 2005, airborne in situ measurements of NO, NOy, CO, and O3 mixing ratios and the J(NO2) photolysis rate were carried out in the anvil outflow of thunderstorms over southern Brazil. Both tropical and subtropical thunderstorms were investigated, depending on the location of the South Atlantic convergence zone. Tropical air masses were discriminated from subtropical ones according to the higher equivalent potential temperature (?e) in the lower and mid troposphere, the higher CO mixing ratio in the mid troposphere, and the lower wind velocity and proper wind direction in the upper troposphere. During thunderstorm anvil penetrations, typically at 20?40 km horizontal scales, NOx mixing ratios were on average enhanced by 0.2?1.6 nmol mol?1. This enhancement was mainly attributed to NOx production by lightning and partly due to upward transport from the NOx-richer boundary layer. In addition, CO mixing ratios were occasionally enhanced, indicating upward transport from the boundary layer. For the first time, the composition of the anvil outflow from a large, long-lived mesoscale convective system (MCS) advected from northern Argentina and Uruguay was investigated in more detail. Over a horizontal scale of about 400 km, NOx, CO and O3 mixing ratios were significantly enhanced in these air masses in the range of 0.6?1.1, 110?140 and 60?70 nmol mol?1, respectively. Analyses from trace gas correlations and a Lagrangian particle dispersion model indicate that polluted air masses, probably from the Buenos Aires urban area and from biomass burning regions, were uplifted by the MCS. Ozone was distinctly enhanced in the aged MCS outflow, due to photochemical production and entrainment of O3-rich air masses from the upper troposphere ? lower stratosphere region. The aged MCS outflow was transported to the north, ascended and circulated, driven by the Bolivian High over the Amazon basin. In the observed case, the O3-rich MCS outflow remained over the continent and did not contribute to the South Atlantic ozone maximum
Современное состояние и перспективы развития ООПТ Томской области
В работе дана характеристика сети особо охраняемых природных территорий Томской области, ее роли в поддержании эколого-хозяйственного баланса области. Определены этапы формирования сети ООПТ. Дан анализ географического разнообразия сети ООПТ и представленности ее в административных районах области. Определена роль сети ООПТ в сохранении редких и исчезающих видов растений и животных. Разработана и реализована методика комплексной оценки эффективности сети ООПТ. Предложены пути ее развития и оптимизации.In work the characteristic of the network of specially protected natural territories of the Tomsk region, its role in maintaining ecological and economic balance of the region. The stages of forming a network of protected areas. The analysis of the geographic diversity of the PA network and its representation in the administrative districts of the region. Defined the role of the network of protected areas in the conservation of rare and endangered species of plants and animals. Developed and implemented a methodology of comprehensive evaluation of the effectiveness of the PA network. The proposed ways of its development and optimization
Group-IV graphene- and graphane-like nanosheets
We performed a first principles investigation on the structural and
electronic properties of group-IV (C, SiC, Si, Ge, and Sn) graphene-like sheets
in flat and buckled configurations and the respective hydrogenated or
fluorinated graphane-like ones. The analysis on the energetics, associated with
the formation of those structures, showed that fluorinated graphane-like sheets
are very stable, and should be easily synthesized in laboratory. We also
studied the changes on the properties of the graphene-like sheets, as result of
hydrogenation or fluorination. The interatomic distances in those graphane-like
sheets are consistent with the respective crystalline ones, a property that may
facilitate integration of those sheets within three-dimensional nanodevices
Graphene nanoribbons with zigzag and armchair edges prepared by scanning tunneling microscope lithography on gold substrates
The properties of graphene nanoribbons are dependent on both the nanoribbon width and the crystallographic orientation of the edges. Scanning tunneling microscope lithography is a method which is able to create graphene nanoribbons with well defined edge orientation, having a width of a few nanometers. However, it has only been demonstrated on the top layer of graphite. In order to allow practical applications of this powerful lithography technique, it needs to be implemented on single layer graphene. We demonstrate the preparation of graphene nanoribbons with well defined crystallographic orientation on top of gold substrates. Our transfer and lithography approach brings one step closer the preparation of well defined graphene nanoribbons on arbitrary substrates for nanoelectronic applications
Quasiparticle bandgap engineering of graphene and graphone on hexagonal boron nitride substrate
Graphene holds great promise for post-silicon electronics, however, it faces
two main challenges: opening up a bandgap and finding a suitable substrate
material. In principle, graphene on hexagonal boron nitride (hBN) substrate
provides potential system to overcome these challenges. Recent theoretical and
experimental studies have provided conflicting results: while theoretical
studies suggested a possibility of a finite bandgap of graphene on hBN, recent
experimental studies find no bandgap. Using the first-principles density
functional method and the many-body perturbation theory, we have studied
graphene on hBN substrate. A Bernal stacked graphene on hBN has a bandgap on
the order of 0.1 eV, which disappears when graphene is misaligned with respect
to hBN. The latter is the likely scenario in realistic devices. In contrast, if
graphene supported on hBN is hydrogenated, the resulting system (graphone)
exhibits bandgaps larger than 2.5 eV. While the bandgap opening in graphene/hBN
is due to symmetry breaking and is vulnerable to slight perturbation such as
misalignment, the graphone bandgap is due to chemical functionalization and is
robust in the presence of misalignment. The bandgap of graphone reduces by
about 1 eV when it is supported on hBN due to the polarization effects at the
graphone/hBN interface. The band offsets at graphone/hBN interface indicate
that hBN can be used not only as a substrate but also as a dielectric in the
field effect devices employing graphone as a channel material. Our study could
open up new way of bandgap engineering in graphene based nanostructures.Comment: 8 pages, 4 figures; Nano Letters, Publication Date (Web): Oct. 25
2011, http://pubs.acs.org/doi/abs/10.1021/nl202725
Patterning graphene nanostripes in substrate-supported functionalized graphene: A promising route to integrated, robust, and superior transistors
It is promising to apply quantum-mechanically confined graphene systems in
field-effect transistors. High stability, superior performance, and large-scale
integration are the main challenges facing the practical application of
graphene transistors. Our understandings of the adatom-graphene interaction
combined with recent progress in the nanofabrication technology indicate that
very stable and high-quality graphene nanostripes could be integrated in
substrate-supported functionalized (hydrogenated or fluorinated) graphene using
electron-beam lithography. We also propose that parallelizing a couple of
graphene nanostripes in a transistor should be preferred for practical
application, which is also very useful for transistors based on graphene
nanoribbon.Comment: Frontiers of Physics (2012) to be publishe
Recommended from our members
Tracing troposphere-to-stratosphere transport above a mid-latitude deep convective system
Within the project SPURT (trace gas measurements in the tropopause region) a variety of trace gases have been measured in situ in order to investigate the role of dynamical and chemical processes in the extra-tropical tropopause region. In this paper we report on a flight on 10 November 2001 leading from Hohn, Germany (52�N) to Faro, Portugal (37�N) through a strongly developed deep stratospheric intrusion. This streamer was associated with a large convective system over the western Mediterranean with potentially significant troposphere-to-stratosphere transport. Along major parts of the flight we measured unexpectedly high NOy mixing ratios. Also H2O mixing ratios were significantly higher than stratospheric background levels confirming the extraordinary chemical signature of the probed air masses in the interior of the streamer. Backward trajectories encompassing the streamer enable to analyze the origin and physical characteristics of the air masses and to trace troposphere-to-stratosphere transport. Near the western flank of the streamer features caused by long range transport, such as tropospheric filaments characterized by sudden drops in the O3 and NOy mixing ratios and enhanced CO and H2O can be reconstructed in great detail using the reverse domain filling technique. These filaments indicate a high potential for subsequent mixing with the stratospheric air. At the south-western edge of the streamer a strong gradient in the NOy and the O3 mixing ratios coincides very well with a sharp gradient in potential vorticity in the ECMWF fields. In contrast, in the interior of the streamer the observed highly elevated NOy and H2O mixing ratios up to a potential temperature level of 365K and potential vorticity values of maximum 10 PVU cannot be explained in terms of resolved troposphere-to-stratosphere transport along the backward trajectories. Also mesoscale simulations with a High Resolution Model reveal no direct evidence for convective H2O injection up to this level. Elevated H2O mixing ratios in the ECMWF and HRM are seen only up to about tropopause height at 340 hPa and 270 hPa, respectively, well below flight altitude of about 200 hPa. However, forward tracing of the convective influence as identified by satellite brightness temperature measurements and counts of lightning strokes shows that during this part of the flight the aircraft was closely following the border of an air mass which was heavily impacted by convective activity over Spain and Algeria. This is evidence that deep convection at mid-latitudes may have a large impact on the tracer distribution of the lowermost stratosphere reaching well above the thunderstorms anvils as claimed by recent studies using cloud-resolving models
A combined view on precipitation and temperature climatology and trends in the southern Andes of Peru
In the southern Peruvian Andes, communities are highly dependent on climatic conditions due to the mainly rain-fed agriculture and the importance of glaciers and snow melt as a freshwater resource. Longer-term trends and year-to-year variability of precipitation or temperature severely affect living conditions. This study evaluates seasonal precipitation and temperature climatologies and trends in the period 1965/66–2017/18 for the southern Peruvian Andes using quality-controlled and homogenized station data and new observational gridded data. In this region, precipitation exhibits a strong annual cycle with very dry winter months and most of the precipitation falling from spring to autumn. Spatially, a northeast–southwest gradient in austral spring is observed, related to an earlier start of the rainy season in the northeastern partof the study area. Seasonal variations of maximum temperature are weak withan annual maximum in austral spring, which is related to reduced cloud coverin austral spring compared to summer. On the contrary, minimum tempera-tures show larger seasonal variations, possibly enhanced through changes inlongwave incoming radiation following the precipitation cycle. Precipitationtrends since 1965 exhibit low spatial consistency except for austral summer,when in most of the study area increasing precipitation is observed, and in aus-tral spring, when stations in the central-western region of the study area regis-ter decreasing precipitation. All seasonal and annual trends in maximum temperature are larger than trends in minimum temperature. Maximum temperature exhibits strong trends in austral winter and spring, whereas minimum temperature trends are strongest in austral winter. We hypothesize, that these trends are related to precipitation changes, as decreasing (increasing) precipita-tion in spring (summer) may enhance maximum (minimum) temperature trends through changes in cloud cover. El Niño Southern Oscillation (ENSO), however, has modifying effects onto precipitation and temperature, and thereby leads to larger trends in maximum temperatures
High On/Off Ratios in Bilayer Graphene Field Effect Transistors Realized by Surface Dopants
The unique property of bilayer graphene to show a band gap tunable by
external electrical fields enables a variety of different device concepts with
novel functionalities for electronic, optoelectronic and sensor applications.
So far the operation of bilayer graphene based field effect transistors
requires two individual gates to vary the channel's conductance and to create a
band gap. In this paper we report on a method to increase the on/off ratio in
single gated bilayer graphene field effect transistors by adsorbate doping. The
adsorbate dopants on the upper side of the graphene establish a displacement
field perpendicular to the graphene surface breaking the inversion symmetry of
the two graphene layers. Low temperature measurements indicate, that the
increased on/off ratio is caused by the opening of a mobility gap. Beside field
effect transistors the presented approach can also be employed for other
bilayer graphene based devices like photodetectors for THz to infrared
radiation, chemical sensors and in more sophisticated structures such as
antidot- or superlattices where an artificial potential landscape has to be
created.Comment: 4 pages, 4 figure
- …