Extreme AGN variability: evidence of magnetically elevated accretion?

Rapid, large amplitude variability at optical to X-ray wavelengths is now seen in an increasing number of Seyfert galaxies and luminous quasars. The variations imply a global change in accretion power, but are too rapid to be communicated by inflow through a standard thin accretion disc. Such discs are long known to have difficulty explaining the observed optical/UV emission from active galactic nuclei. Here we show that alternative models developed to explain these observations have larger scale heights and shorter inflow times. Accretion discs supported by magnetic pressure in particular are geometrically thick at all luminosities, with inflow times as short as the observed few year timescales in extreme variability events to date. Future time-resolved, multi-wavelength observations can distinguish between inflow through a geometrically thick disc as proposed here, and alternative scenarios of extreme reprocessing of a central source or instability-driven limit cycles.Comment: 5 pages, 2 figures, submitted to MNRAS letter

The size of the jet launching region in M87

The supermassive black hole candidate at the center of M87 drives an ultra-relativistic jet visible on kiloparsec scales, and its large mass and relative proximity allow for event horizon scale imaging with very long baseline interferometry at millimeter wavelengths (mm-VLBI). Recently, relativistic magneto-hydrodynamic (MHD) simulations of black hole accretion flows have proven capable of launching magnetically-dominated jets. We construct time-dependent disc/jet models of the innermost portion of the M87 nucleus by performing relativistic radiative transfer calculations from one such simulation. We identify two types of models, jet-dominated or disc/jet, that can explain the spectral properties of M87, and use them to make predictions for current and future mm-VLBI observations. The Gaussian source size for the favored sky orientation and inclination from observations of the large-scale jet is 33-44 microarcseconds (~4-6 Schwarzschild radii) on current mm-VLBI telescopes, very similar to existing observations of Sgr A*. The black hole shadow, direct evidence of an event horizon, should be visible in future measurements using baselines between Hawaii and Mexico. Both models exhibit variability at millimeter wavelengths with factor of ~2 amplitudes on year timescales. For the low inclination of M87, the counter-jet dominates the event horizon scale millimeter wavelength emission from the jet-forming region.Comment: 13 pages, 10 figures, MNRAS in press. Minor changes from original versio

What is the Hidden Depolarization Mechanism in Low Luminosity AGN?

Millimeter wavelength polarimetry of accreting black hole systems can provide a tomographic probe of the accretion flow on a wide range of linear scales. We searched for linear polarization in two low luminosity active galactic nuclei (LLAGN), M81 and M84, using the Combined Array for Millimeter Astronomy (CARMA) and the Submillimeter Array (SMA). We find upper limits of $\sim 1 - 2\%$ averaging over the full bandwidth and with a rotation measure (RM) synthesis technique. These low polarization fractions, along with similar low values for LLAGN M87 and 3C84, suggest that LLAGN have qualitatively different polarization properties than radio-loud sources and Sgr A*. If the sources are intrinsically polarized and then depolarized by Faraday rotation then we place lower limits on the RM of a few times $10^7\, {\rm rad\, m^{-2}}$ for the full bandwidth case and $\sim 10^9\, {\rm rad\, m^{-2}}$ for the RM synthesis analysis. These limits are inconsistent with or marginally consistent with expected accretion flow properties. Alternatively, the sources may be depolarized by cold electrons within a few Schwarzschild radii from the black hole, as suggested by numerical models.Comment: Accepted for publication in ApJ

Transient jet formation and state transitions from large-scale magnetic reconnection in black hole accretion discs

Magnetically arrested accretion discs (MADs), where the magnetic pressure in the inner disc is dynamically important, provide an alternative mechanism for regulating accretion to what is commonly assumed in black hole systems. We show that a global magnetic field inversion in the MAD state can destroy the jet, significantly increase the accretion rate, and move the effective inner disc edge in to the marginally stable orbit. Reconnection of the MAD field in the inner radii launches a new type of transient outflow containing hot plasma generated by magnetic dissipation. This transient outflow can be as powerful as the steady magnetically-dominated Blandford-Znajek jet in the MAD state. The field inversion qualitatively describes many of the observational features associated with the high luminosity hard to soft state transition in black hole X-ray binaries: the jet line, the transient ballistic jet, and the drop in rms variability. These results demonstrate that the magnetic field configuration can influence the accretion state directly, and hence the magnetic field structure is an important second parameter in explaining observations of accreting black holes across the mass and luminosity scales.Comment: 5 pages, 3 figures, submitted to MNRAS Letter

Buckling of conical shell with local imperfections

Small geometric imperfections in thin-walled shell structures can cause large reductions in buckling strength. Most imperfections found in structures are neither axisymmetric nor have the shape of buckling modes but rather occur locally. This report presents the results of a study of the effect of local imperfections on the critical buckling load of a specific axially compressed thin-walled conical shell. The buckling calculations were performed by using a two-dimensional shell analysis program referred to as the STAGS (Structural Analysis of General Shells) computer code, which has no axisymmetry restrictions. Results show that the buckling load found from a bifurcation buckling analysis is highly dependent on the circumferential arc length of the imperfection type studied. As the circumferential arc length of the imperfection is increased, a reduction of up to 50 percent of the critical load of the perfect shell can occur. The buckling load of the cone with an axisymmetric imperfections is nearly equal to the buckling load of imperfections which extended 60 deg or more around the circumference, but would give a highly conservative estimate of the buckling load of a shell with an imperfection of a more local nature

GRMHD simulations of accretion onto Sgr A*: How important are radiative losses?

We present general relativistic magnetohydrodynamic (GRMHD) numerical simulations of the accretion flow around the supermassive black hole in the Galactic centre, Sagittarius A* (Sgr A*). The simulations include for the first time radiative cooling processes (synchrotron, bremsstrahlung, and inverse Compton) self-consistently in the dynamics, allowing us to test the common simplification of ignoring all cooling losses in the modeling of Sgr A*. We confirm that for Sgr A*, neglecting the cooling losses is a reasonable approximation if the Galactic centre is accreting below ~10^{-8} Msun/yr i.e. Mdot < 10^{-7} Mdot_Edd. But above this limit, we show that radiative losses should be taken into account as significant differences appear in the dynamics and the resulting spectra when comparing simulations with and without cooling. This limit implies that most nearby low-luminosity active galactic nuclei are in the regime where cooling should be taken into account. We further make a parameter study of axisymmetric gas accretion around the supermassive black hole at the Galactic centre. This approach allows us to investigate the physics of gas accretion in general, while confronting our results with the well studied and observed source, Sgr A*, as a test case. We confirm that the nature of the accretion flow and outflow is strongly dependent on the initial geometry of the magnetic field. For example, we find it difficult, even with very high spins, to generate powerful outflows from discs threaded with multiple, separate poloidal field loops.Comment: Resubmitted to MNRAS, including modifications in response to referee report. 13 pages, 15 figure

Radiative Models of Sagittarius A* and M87 from Relativistic MHD Simulations

Ongoing millimeter VLBI observations with the Event Horizon Telescope allow unprecedented study of the innermost portion of black hole accretion flows. Interpreting the observations requires relativistic, time-dependent physical modeling. We discuss the comparison of radiative transfer calculations from general relativistic MHD simulations of Sagittarius A* and M87 with current and future mm-VLBI observations. This comparison allows estimates of the viewing geometry and physical conditions of the Sgr A* accretion flow. The viewing geometry for M87 is already constrained from observations of its large-scale jet, but, unlike Sgr A*, there is no consensus for its millimeter emission geometry or electron population. Despite this uncertainty, as long as the emission region is compact, robust predictions for the size of its jet launching region can be made. For both sources, the black hole shadow may be detected with future observations including ALMA and/or the LMT, which would constitute the first direct evidence for a black hole event horizon.Comment: 8 pages, 2 figures, submitted to the proceedings of AHAR 2011: The Central Kiloparse

An infiltration/cure model for manufacture of fabric composites by the resin infusion process

A 1-D infiltration/cure model was developed to simulate fabrication of advanced textile composites by the resin film infusion process. The simulation model relates the applied temperature and pressure processing cycles, along with the experimentally measured compaction and permeability characteristics of the fabric preforms, to the temperature distribution, the resin degree of cure and viscosity, and the infiltration flow front position as a function of time. The model also predicts the final panel thickness, fiber volume fraction, and resin mass for full saturation as a function of compaction pressure. Composite panels were fabricated using the RTM (Resin Transfer Molding) film infusion technique from knitted, knitted/stitched, and 2-D woven carbon preforms and Hercules 3501-6 resin. Fabric composites were fabricated at different compaction pressures and temperature cycles to determine the effects of the processing on the properties. The composites were C-scanned and micrographed to determine the quality of each panel. Advanced cure cycles, developed from the RTM simulation model, were used to reduce the total cure cycle times by a factor of 3 and the total infiltration times by a factor of 2

Ethane-beta-Sultam Modifies the Activation of the Innate Immune System Induced by Intermittent Ethanol Administration in Female Adolescent Rats

Intermittent ethanol abuse or ‘binge drinking’ during adolescence induces neuronal damage, which may be associated with cognitive dysfunction. To investigate the neurochemical processes involved, rats were administered either 1 g/kg or 2 g/kg ethanol in a ‘binge drinking’ regime. After only 3 weeks, significant activation of phagocytic cells in the peripheral (alveolar macrophages) and the hippocampal brain region (microglia cells) was present,as exemplified by increases in the release of pro-inflammatory cytokines in the macrophages and of iNOS in the microglia. This was associated with neuronal loss in the hippocampus CA1 region. Daily supplementation with a taurine prodrug, ethane-β-sultam, 0.028 g/kg, during the intermittent ethanol loading regime, supressed the release of the pro-inflammatory cytokines and of reactive nitrogen species, as well as neuronal loss, particularly in the rats administered the lower dose of ethanol, 1 g/kg. Plasma, macrophage and hippocampal taurine levels increased marginally after ethane-β-sultam supplementation. The ‘binge drinking’ ethanol rats administered 1 g/kg ethanol showed increased latencies to those of the control rats in their acquisition of spacial navigation in the Morris Water Maze, which was normalised to that of the controls values after ethane-β-sultam administration. Such results confirm that the administration of ethane-β-sultam to binge drinking rats reduces neuroinflammation in both the periphery and the brain, suppresses neuronal loss, and improved working memory of rats in a water maze study