16 research outputs found
APDs as Single-Photon Detectors for Visible and Near-Infrared Wavelenghts down to Hz Rates
For the SPECTRAP experiment at GSI, Germany, detectors with Single-Photon
counting capability in the visible and near-infrared regime are required. For
the wavelength region up to 1100 nm we investigate the performance of 2x2 mm^2
avalanche photo diodes (APDs) of type S0223 manufactured by Radiation
Monitoring Devices. To minimize thermal noise, the APDs are cooled to
approximately -170 deg. C using liquid nitrogen. By operating the diodes close
to the breakdown voltage it is possible to achieve relative gains in excess of
2x10^4. Custom-made low noise preamplifiers are used to read out the devices.
The measurements presented in this paper have been obtained at a relative gain
of 2.2x10^4. At a discriminator threshold of 6 mV the resulting dark count rate
is in the region of 230/s. With these settings the studied APDs are able to
detect single photons at 628 nm wavelength with a photo detection efficiency of
(67+-7)%. Measurements at 1020 nm wavelength have been performed using the
attenuated output of a grating spectrograph with a light bulb as photon source.
With this setup the photo detection efficiency at 1020 nm has been determined
to be (13+-3)%, again at a threshold of 6 mV.Comment: 14 pages, 9 figures, submitted to Journal of Instrumentatio
APDs as Single-Photon Detectors for Visible and Near-Infrared Wavelenghts down to Hz Rates
For the SPECTRAP experiment at GSI, Germany, detectors with Single-Photon
counting capability in the visible and near-infrared regime are required. For
the wavelength region up to 1100 nm we investigate the performance of 2x2 mm^2
avalanche photo diodes (APDs) of type S0223 manufactured by Radiation
Monitoring Devices. To minimize thermal noise, the APDs are cooled to
approximately -170 deg. C using liquid nitrogen. By operating the diodes close
to the breakdown voltage it is possible to achieve relative gains in excess of
2x10^4. Custom-made low noise preamplifiers are used to read out the devices.
The measurements presented in this paper have been obtained at a relative gain
of 2.2x10^4. At a discriminator threshold of 6 mV the resulting dark count rate
is in the region of 230/s. With these settings the studied APDs are able to
detect single photons at 628 nm wavelength with a photo detection efficiency of
(67+-7)%. Measurements at 1020 nm wavelength have been performed using the
attenuated output of a grating spectrograph with a light bulb as photon source.
With this setup the photo detection efficiency at 1020 nm has been determined
to be (13+-3)%, again at a threshold of 6 mV.Comment: 14 pages, 9 figures, submitted to Journal of Instrumentatio
APDs as Single-Photon Detectors for Visible and Near-Infrared Wavelenghts down to Hz Rates
For the SPECTRAP experiment at GSI, Germany, detectors with Single-Photon
counting capability in the visible and near-infrared regime are required. For
the wavelength region up to 1100 nm we investigate the performance of 2x2 mm^2
avalanche photo diodes (APDs) of type S0223 manufactured by Radiation
Monitoring Devices. To minimize thermal noise, the APDs are cooled to
approximately -170 deg. C using liquid nitrogen. By operating the diodes close
to the breakdown voltage it is possible to achieve relative gains in excess of
2x10^4. Custom-made low noise preamplifiers are used to read out the devices.
The measurements presented in this paper have been obtained at a relative gain
of 2.2x10^4. At a discriminator threshold of 6 mV the resulting dark count rate
is in the region of 230/s. With these settings the studied APDs are able to
detect single photons at 628 nm wavelength with a photo detection efficiency of
(67+-7)%. Measurements at 1020 nm wavelength have been performed using the
attenuated output of a grating spectrograph with a light bulb as photon source.
With this setup the photo detection efficiency at 1020 nm has been determined
to be (13+-3)%, again at a threshold of 6 mV.Comment: 14 pages, 9 figures, submitted to Journal of Instrumentatio
Reduction of stored-particle background by a magnetic pulse method at the KATRIN experiment
The KATRIN experiment aims to determine the effective electron neutrino mass with a sensitivity of 0.2 eV/c2 (%90 CL) by precision measurement of the shape of the tritium β-spectrum in the endpoint region. The energy analysis of the decay electrons is achieved by a MAC-E filter spectrometer. A common background source in this setup is the decay of short-lived isotopes, such as 219Rn and 220Rn, in the spectrometer volume. Active and passive countermeasures have been implemented and tested at the KATRIN main spectrometer. One of these is the magnetic pulse method, which employs the existing air coil system to reduce the magnetic guiding field in the spectrometer on a short timescale in order to remove low- and high-energy stored electrons. Here we describe the working principle of this method and present results from commissioning measurements at the main spectrometer. Simulations with the particle-tracking software Kassiopeia were carried out to gain a detailed understanding of the electron storage conditions and removal processes
Reduction of stored-particle background by a magnetic pulse method at the KATRIN experiment
The KATRIN experiment aims to determine the effective electron neutrino mass with a sensitivity of 0.2 eV/c2 (%90 CL) by precision measurement of the shape of the tritium β-spectrum in the endpoint region. The energy analysis of the decay electrons is achieved by a MAC-E filter spectrometer. A common background source in this setup is the decay of short-lived isotopes, such as 219Rn and 220Rn, in the spectrometer volume. Active and passive countermeasures have been implemented and tested at the KATRIN main spectrometer. One of these is the magnetic pulse method, which employs the existing air coil system to reduce the magnetic guiding field in the spectrometer on a short timescale in order to remove low- and high-energy stored electrons. Here we describe the working principle of this method and present results from commissioning measurements at the main spectrometer. Simulations with the particle-tracking software Kassiopeia were carried out to gain a detailed understanding of the electron storage conditions and removal processes
APDs as single-photon detectors for visible and near-infrared wavelengths down to Hz rates
For the SPECTRAP experiment at GSI, Germany, detectors with Single-Photon
counting capability in the visible and near-infrared regime are required. For
the wavelength region up to 1100 nm we investigate the performance of 2x2 mm^2
avalanche photo diodes (APDs) of type S0223 manufactured by Radiation
Monitoring Devices. To minimize thermal noise, the APDs are cooled to
approximately -170 deg. C using liquid nitrogen. By operating the diodes close
to the breakdown voltage it is possible to achieve relative gains in excess of
2x10^4. Custom-made low noise preamplifiers are used to read out the devices.
The measurements presented in this paper have been obtained at a relative gain
of 2.2x10^4. At a discriminator threshold of 6 mV the resulting dark count rate
is in the region of 230/s. With these settings the studied APDs are able to
detect single photons at 628 nm wavelength with a photo detection efficiency of
(67+-7)%. Measurements at 1020 nm wavelength have been performed using the
attenuated output of a grating spectrograph with a light bulb as photon source.
With this setup the photo detection efficiency at 1020 nm has been determined
to be (13+-3)%, again at a threshold of 6 mV.Comment: 14 pages, 9 figures, submitted to Journal of Instrumentatio