Fabrication of high temperature surface acoustic wave devices for sensor applications

Surface acoustic devices have been shown to be suitable not only for signal processing but also for sensor applications. In this paper high temperature surface acoustic wave devices based on gallium orthophosphate have been fabricated, using a lift-off technique and tested for high frequency applications at temperatures up to 600 ºC. The measured S-parameter (S11) has been used to study the mass loading effect of the platinum electrodes and turnover temperature of GaPO4 with a 5? cut. The analysis of these results shows that the mass loading effect can be used to predict the desired resonant frequency of the SAW devices. Also two different adhesion layers for Pt metallisation were studied. Our results show that Zirconium is a more suitable under layer than Titanium

Finite Size Effects in Fluid Interfaces

It is shown that finite size effects in the free energy of a rough interface of the 3D Ising and three--state Potts models are well described by the capillary wave model at {\em two--loop} order. The agreement between theoretical predictions and Monte Carlo simulations strongly supports the idea of the universality of this description of order--order interfaces in 3D statistical systems above the roughening temperature.Comment: 3 pages, uuencoded .ps file, figures included. (Proceeding of Lattice '93

Profile and width of rough interfaces

In the context of Landau theory and its field theoretical refinements, interfaces between coexisting phases are described by intrinsic profiles. These intrinsic interface profiles, however, are neither directly accessible by experiment nor by computer simulation as they are broadened by long-wavelength capillary waves. In this paper we study the separation of the small scale intrinsic structure from the large scale capillary wave fluctuations in the Monte Carlo simulated three-dimensional Ising model. To this purpose, a blocking procedure is applied, using the block size as a variable cutoff, and a translationally invariant method to determine the interface position of strongly fluctuating profiles on small length scales is introduced. While the capillary wave picture is confirmed on large length scales and its limit of validity is estimated, an intrinsic regime is, contrary to expectations, not observed.Comment: 18 pages, 4 Postscript figures, LaTeX2e, formulation of sec.3.2 improved, 1 reference adde

Molecular Dynamics Study of the Nematic-Isotropic Interface

We present large-scale molecular dynamics simulations of a nematic-isotropic interface in a system of repulsive ellipsoidal molecules, focusing in particular on the capillary wave fluctuations of the interfacial position. The interface anchors the nematic phase in a planar way, i.e., the director aligns parallel to the interface. Capillary waves in the direction parallel and perpendicular to the director are considered separately. We find that the spectrum is anisotropic, the amplitudes of capillary waves being larger in the direction perpendicular to the director. In the long wavelength limit, however, the spectrum becomes isotropic and compares well with the predictions of a simple capillary wave theory.Comment: to appear in Phys. Rev.

Investigating trial design variability in trials of disease-modifying therapies in Parkinson’s disease: a scoping review protocol

\ua9 Author(s) (or their employer(s)) 2023. Re-use permitted under CC BY-NC. No commercial re-use. See rights and permissions. Published by BMJ.Introduction Parkinson’s disease (PD) is a debilitating neurological disorder for which the identification of disease-modifying interventions represents a major unmet need. Diverse trial designs have attempted to mitigate challenges of population heterogeneity, efficacious symptomatic therapy and lack of outcome measures that are objective and sensitive to change in a disease modification setting. It is not clear whether consensus is emerging regarding trial design choices. Here, we report the protocol of a scoping review that will provide a contemporary update on trial design variability for disease-modifying interventions in PD. Methods and analysis The Population, Intervention, Comparator, Outcome and Study design (PICOS) framework will be used to structure the review, inform study selection and analysis. The databases MEDLINE, Web of Science, Cochrane and the trial registry ClinicalTrials.gov will be systematically searched to identify published studies and registry entries in English. Two independent reviewers will screen study titles, abstracts and full text for eligibility, with disagreements being resolved through discussion or by a third reviewer where necessary. Data on general study information, eligibility criteria, outcome measures, trial design, retention and statistically significant findings will be extracted into a standardised form. Extracted data will be presented in a descriptive analysis. We will report our findings using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Scoping Review extension. Ethics and dissemination This work will provide an overview of variation and emerging trends in trial design choices for disease-modifying trials of PD. Due to the nature of this study, there are no ethical or safety considerations. We plan to publish our findings in a peer-reviewed journal

Acellular dermal matrix and coronally advanced flap or tunnel technique in the treatment of multiple adjacent gingival recessions. A 12-year follow-up from a randomized clinical trial

AimTo evaluate the long-term outcomes of Acellular Dermal Matrix (ADM) with Coronally Advanced Flap (CAF) or Tunnel technique (TUN) in the treatment of multiple adjacent gingival recessions (MAGRs).Material and methodsNineteen of the original 24 patients contributing to a total number of 33 sites for CAF and 34 for TUN were available for the 12 years follow-up examination. Recession depth, mean root coverage (mRC), keratinized tissue width (KTW), gingival thickness (GT) were evaluated and compared with baseline values and 6-months results. Regression analysis was performed to identify factors related to the stability of the gingival margin.ResultsA highly significant drop in mRC was observed for both groups from the 6 months timepoint to the 12 years recall (p  .05). KTW - 2 mm and GT - 1.2 mm at 6-months were two predictors for stability of the gingival margin (p = .03 and p = .01, respectively).ConclusionsA significant relapse of the gingival margin of MAGRs treated with CAF or TUN + ADM was observed after 12 years.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/151340/1/jcpe13163_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/151340/2/jcpe13163.pd

Test-area simulation method for the direct determination of the interfacial tension of systems with continuous or discontinuous potentials

A novel test-area TA technique for the direct simulation of the interfacial tension of systems interacting through arbitrary intermolecular potentials is presented in this paper. The most commonly used method invokes the mechanical relation for the interfacial tension in terms of the tangential and normal components of the pressure tensor relative to the interface the relation of Kirkwood and Buff J. Chem. Phys. 17, 338 1949 . For particles interacting through discontinuous intermolecular potentials e.g., hard-core fluids this involves the determination of functions which are impractical to evaluate, particularly in the case of nonspherical molecules. By contrast we employ a thermodynamic route to determine the surface tension from a free-energy perturbation due to a test change in the surface area. There are important distinctions between our test-area approach and the computation of a free-energy difference of two or more systems with different interfacial areas the method of Bennett J. Comput. Phys. 22, 245 1976 , which can also be used to determine the surface tension. In order to demonstrate the adequacy of the method, the surface tension computed from test-area Monte Carlo TAMC simulations are compared with the data obtained with other techniques e.g., mechanical and free-energy differences for the vapor-liquid interface of Lennard-Jones and square-well fluids; the latter corresponds to a discontinuous potential which is difficult to treat with standard methods. Our thermodynamic test-area approach offers advantages over existing techniques of computational efficiency, ease of implementation, and generality. The TA method can easily be implemented within either Monte Carlo TAMC or molecular-dynamics TAMD algorithms for different types of interfaces vapor-liquid, liquid-liquid, fluid-solid, etc. of pure systems and mixtures consisting of complex polyatomic molecules

Intrinsic profiles and capillary waves at homopolymer interfaces: a Monte Carlo study

A popular concept which describes the structure of polymer interfaces by ``intrinsic profiles'' centered around a two dimensional surface, the ``local interface position'', is tested by extensive Monte Carlo simulations of interfaces between demixed homopolymer phases in symmetric binary (AB) homopolymer blends, using the bond fluctuation model. The simulations are done in an LxLxD geometry. The interface is forced to run parallel to the LxL planes by imposing periodic boundary conditions in these directions and fixed boundary conditions in the D direction, with one side favoring A and the other side favoring B. Intrinsic profiles are calculated as a function of the ``coarse graining length'' B by splitting the system into columns of size BxBxD and averaging in each column over profiles relative to the local interface position. The results are compared to predictions of the self-consistent field theory. It is shown that the coarse graining length can be chosen such that the interfacial width matches that of the self-consistent field profiles, and that for this choice of B the ``intrinsic'' profiles compare well with the theoretical predictions.Comment: to appear in Phys. Rev.

A critical assessment of methods for the intrinsic analysis of liquid interfaces. 1. surface site distributions

Substantial progress in our understanding of interfacial structure and dynamics has stemmed from the recent development of algorithms that allow for an intrinsic analysis of fluid interfaces. These work by identifying the instantaneous location of the interface, at the atomic level, for each molecular configuration and then computing properties relative to this location. Such a procedure eliminates the broadening of the interface caused by capillary waves and reveals the underlying features of the system. However, a precise definition of which molecules actually belong to the interfacial layer is difficult to achieve in practice. Furthermore, it is not known if the different intrinsic analysis methods are consistent with each other and yield similar results for the interfacial properties. In this paper, we carry out a systematic and detailed comparison of the available methods for intrinsic analysis of fluid interfaces, based on a molecular dynamics simulation of the interface between liquid water and carbon tetrachloride. We critically assess the advantages and shortcomings of each method, based on reliability, robustness, and speed of computation, and establish consistent criteria for determining which molecules belong to the surface layer. We believe this will significantly contribute to make intrinsic analysis methods widely and routinely applicable to interfacial systems