Flexible conformable hydrophobized surfaces for turbulent flow drag reduction

In recent years extensive work has been focused onto using superhydrophobic surfaces for drag reduction applications. Superhydrophobic surfaces retain a gas layer, called a plastron, when submerged underwater in the Cassie-Baxter state with water in contact with the tops of surface roughness features. In this state the plastron allows slip to occur across the surface which results in a drag reduction. In this work we report flexible and relatively large area superhydrophobic surfaces produced using two different methods: Large roughness features were created by electrodeposition on copper meshes; Small roughness features were created by embedding carbon nanoparticles (soot) into Polydimethylsiloxane (PDMS). Both samples were made into cylinders with a diameter under 12 mm. To characterize the samples, scanning electron microscope (SEM) images and confocal microscope images were taken. The confocal microscope images were taken with each sample submerged in water to show the extent of the plastron. The hydrophobized electrodeposited copper mesh cylinders showed drag reductions of up to 32% when comparing the superhydrophobic state with a wetted out state. The soot covered cylinders achieved a 30% drag reduction when comparing the superhydrophobic state to a plain cylinder. These results were obtained for turbulent flows with Reynolds numbers 10,000 to 32,500

Breadboard linear array scan imager using LSI solid-state technology

The performance of large scale integration photodiode arrays in a linear array scan (pushbroom) breadboard was evaluated for application to multispectral remote sensing of the earth's resources. The technical approach, implementation, and test results of the program are described. Several self scanned linear array visible photodetector focal plane arrays were fabricated and evaluated in an optical bench configuration. A 1728-detector array operating in four bands (0.5 - 1.1 micrometer) was evaluated for noise, spectral response, dynamic range, crosstalk, MTF, noise equivalent irradiance, linearity, and image quality. Other results include image artifact data, temporal characteristics, radiometric accuracy, calibration experience, chip alignment, and array fabrication experience. Special studies and experimentation were included in long array fabrication and real-time image processing for low-cost ground stations, including the use of computer image processing. High quality images were produced and all objectives of the program were attained

Impact Absorbent Rapid Manufactured Structures (IARMS)

Rapid Manufacturing (RM) is increasingly becoming a viable manufacturing process due to dramatic advantages that it facilitates in the area of design complexity. Through the exploration of the design freedom afforded by RM, this paper introduces the concept and initial research surrounding Impact Absorbent Rapid Manufactured Structures (IARMS), with an application in sports personal protective equipment (PPE). Designs are based on the cellular structure of foams; the inherent advantages of the cellular structure are used as a basis to create IARMS that have the potential to be optimised for a specific impact absorbent response. The paper provides some initial results from compression testingMechanical Engineerin

The Open Navigation Surface Project

Many hydrographic and oceanographic agencies have moved or are moving towards gridded bathymetric products. However, there is no accepted format to allow these grids to be exchanged while maintaining data and metadata integrity. This paper describes the Open Navigation Surface (ONS) Project, which aims to fill this gap. The ONS Project is an open-source software project designed to provide a freely available, portable source-code library to encapsulate gridded bathymetric surfaces with associated uncertainty values. The data file format is called a Bathymetric Attributed Grid (BAG). The BAG is developed and maintained by the ONS Working Group (ONSWG), and the source code is available via the ONS websit

Symptoms and treatment of copper deficiency of wheat

Copper deficiency in wheat is still common but may not be easily noticed

Do (and say) as I say: Linguistic adaptation in human-computer dialogs

© Theodora Koulouri, Stanislao Lauria, and Robert D. Macredie. This article has been made available through the Brunel Open Access Publishing Fund.There is strong research evidence showing that people naturally align to each other’s vocabulary, sentence structure, and acoustic features in dialog, yet little is known about how the alignment mechanism operates in the interaction between users and computer systems let alone how it may be exploited to improve the efficiency of the interaction. This article provides an account of lexical alignment in human–computer dialogs, based on empirical data collected in a simulated human–computer interaction scenario. The results indicate that alignment is present, resulting in the gradual reduction and stabilization of the vocabulary-in-use, and that it is also reciprocal. Further, the results suggest that when system and user errors occur, the development of alignment is temporarily disrupted and users tend to introduce novel words to the dialog. The results also indicate that alignment in human–computer interaction may have a strong strategic component and is used as a resource to compensate for less optimal (visually impoverished) interaction conditions. Moreover, lower alignment is associated with less successful interaction, as measured by user perceptions. The article distills the results of the study into design recommendations for human–computer dialog systems and uses them to outline a model of dialog management that supports and exploits alignment through mechanisms for in-use adaptation of the system’s grammar and lexicon

Quantile regression of tobacco tax pass-through in the UK 2013–2019. How have manufacturers passed through tax changes for different tobacco products?

Background: The effectiveness of tax increases relies heavily on the tobacco industry passing on such increases to smokers (also referred to as ‘pass-through’). Previous research has found heterogeneous levels of tax pass-through across the market segments of tobacco products available to smokers. This study uses retail sales data to assess the extent to which recent tax changes have been passed on to smokers and whether this varies across the price distribution. Methods: We use panel data quantile regression analysis on Nielsen commercial data of tobacco price and sales in the UK from January 2013 to March 2019 combined with official UK tax rates and inflation to calculate the rate of tax pass-through for factory made (FM) cigarettes and roll your own (RYO) tobacco. Results: Following increases in the specific tax payable on tobacco, we find evidence of overshifting across the price distribution for both FM and RYO. The rate of the overshift in tax increased the more expensive the products were. This was consistent for FM and RYO. Additionally, our findings suggest that the introduction of standardised packaging was not followed by changes in how the tobacco industry responded to tax increases. Conclusions: Following the repeated introduction of increases in specific tobacco tax as well as standardised packaging, we show that the tobacco industry applies techniques to keep the cheapest tobacco cheaper relative to the more expensive products when passing on tax increases to: smokers

A new technique for elucidating β\beta-decay schemes which involve daughter nuclei with very low energy excited states

A new technique of elucidating $\beta$-decay schemes of isotopes with large density of states at low excitation energies has been developed, in which a Broad Energy Germanium (BEGe) detector is used in conjunction with coaxial hyper-pure germanium detectors. The power of this technique has been demonstrated on the example of 183Hg decay. Mass-separated samples of 183Hg were produced by a deposition of the low-energy radioactive-ion beam delivered by the ISOLDE facility at CERN. The excellent energy resolution of the BEGe detector allowed $\gamma$ rays energies to be determined with a precision of a few tens of electronvolts, which was sufficient for the analysis of the Rydberg-Ritz combinations in the level scheme. The timestamped structure of the data was used for unambiguous separation of $\gamma$ rays arising from the decay of 183Hg from those due to the daughter decays

An Integrated Circuit for Signal Processing of the AMS RICH Photmultipliers Tubes

An analog integrated circuit has been designed, in a BiCMOS 0.8 micron technology, for the feasability study of the signal processing of the AMS RICH photomultiplier tubes. This low power, three channel gated integrator includes its own gate and no external analog delay is requiered. It processes PMT pulses over a dynamic range of more than 100. A logic output that indicates whether the analog charge has to be considered is provided. This gated integrator is used with a compact DSP based acquisition system in a 132 channels RICH prototype. The charge calibration of each channel is carried out using a LED. The pedestal measurement is performed on activation of a dedicated input. The noise contribution study of the input RC network and amplifiers is presented.Comment: IEEE symp. on Nucl. Sci. and Med. Imaging, Toront

Developing a quality assurance metric: a panoptic view

This article is a post-print of the published article that may be accessed at the link below. Copyright @ 2006 Sage Publications.There are a variety of techniques that lecturers can use to get feedback on their teaching - for example, module feedback and coursework results. However, a question arises about how reliable and valid are the content that goes into these quality assurance metrics. The aim of this article is to present a new approach for collecting and analysing qualitative feedback from students that could be used as the first stage in developing more reliable quality assurance metrics. The approach, known as the multi-dimensional crystal view, is based on the belief that individuals have different views on the benefits that the embedded process in a system can have on the behaviour of the system. The results of this study indicate that in the context of evaluation and feedback methods, the multi-dimensional approach appears to provide the opportunity for developing more effective student feedback mechanisms