165 research outputs found
Mechanism of Vanadium Leaching during Surface Weathering of Basic Oxygen Furnace Steel Slag Blocks: A Microfocus X-ray Absorption Spectroscopy and Electron Microscopy Study
Β© 2017 American Chemical Society. Basic oxygen furnace (BOF) steelmaking slag is enriched in potentially toxic V which may become mobilized in high pH leachate during weathering. BOF slag was weathered under aerated and air-excluded conditions for 6 months prior to SEM/EDS and ΞΌXANES analysis to determine V host phases and speciation in both primary and secondary phases. Leached blocks show development of an altered region in which free lime and dicalcium silicate phases were absent and Ca-Si-H was precipitated (CaCO 3 was also present under aerated conditions). ΞΌXANES analyses show that V was released to solution as V(V) during dicalcium silicate dissolution and some V was incorporated into neo-formed Ca-Si-H. Higher V concentrations were observed in leachate under aerated conditions than in the air-excluded leaching experiment. Aqueous V concentrations were controlled by Ca 3 (VO 4 ) 2 solubility, which demonstrate an inverse relationship between Ca and V concentrations. Under air-excluded conditions Ca concentrations were controlled by dicalcium silicate dissolution and Ca-Si-H precipitation, leading to relatively high Ca and correspondingly low V concentrations. Formation of CaCO 3 under aerated conditions provided a sink for aqueous Ca, allowing higher V concentrations limited by kinetic dissolution rates of dicalcium silicate. Thus, V release may be slowed by the precipitation of secondary phases in the altered region, improving the prospects for slag reuse
Mechanism of Vanadium Leaching during Surface Weathering of Basic Oxygen Furnace Steel Slag Blocks: A Microfocus X-ray Absorption Spectroscopy and Electron Microscopy Study
Basic oxygen furnace (BOF) steelmaking slag is enriched in potentially toxic V which may become mobilized in high pH leachate during weathering. BOF slag was weathered under aerated and air-excluded conditions for 6 months prior to SEM/EDS and ΞΌXANES analysis to determine V host phases and speciation in both primary and secondary phases. Leached blocks show development of an altered region in which free lime and dicalcium silicate phases were absent and CaβSiβH was precipitated (CaCOβ was also present under aerated conditions). ΞΌXANES analyses show that V was released to solution as V(V) during dicalcium silicate dissolution and some V was incorporated into neo-formed CaβSiβH. Higher V concentrations were observed in leachate under aerated conditions than in the air-excluded leaching experiment. Aqueous V concentrations were controlled by Caβ(VOβ)β solubility, which demonstrate an inverse relationship between Ca and V concentrations. Under air-excluded conditions Ca concentrations were controlled by dicalcium silicate dissolution and CaβSiβH precipitation, leading to relatively high Ca and correspondingly low V concentrations. Formation of CaCOβ under aerated conditions provided a sink for aqueous Ca, allowing higher V concentrations limited by kinetic dissolution rates of dicalcium silicate. Thus, V release may be slowed by the precipitation of secondary phases in the altered region, improving the prospects for slag reuse
Crop Updates 2005 - Katanning
This session covers twenty five papers from different authors
KEYNOTE
How Farmers Can Work Together for a More Sustainable and Profitable Business, Brian McAlpine Farmer, Nuffield Scholar
GENERAL
2005 Seasonal Outlook, David Stephens and Nicola Telcik, Department of Agriculture
Essentials for cereal leaf disease management, K. Jayasena, R. Loughman, G. Thomas, C. Beard, and B. Paynter, Department of Agriculture
Benefits to the grower of grain licensing, Colin Mann, Grain Licensing Authority SOIL & NUTRIENTS
The effect of higher nitrogen fertiliser prices on rotation and fertiliser strategies in cropping systems, Ross Kingwell, Department of Agriculture
Effect of stubble burning and seasonality on microbial processes and nutrient cycling, Francis Hoyle, University of Western Australia
Soil Biology and Crop Production in Western Australian Farming Systems, D.V. Murphy, N. Milton, M. Osman, F.C. Hoyle, L.K Abbott, W.R. Cookson and S. Darmawanto, University of Western Australia
Nutrient Management to get optimal production, Bill Bowden, Department of Agriculture
OTHER CROPS
Which malting barley variety and why? Blakely Paynter, Department of Agriculture
KASPA AND OTHER NEW PULSE VARIETIES, 1. New Pulse varieties and where they fit in, K. Regan, P. White, Department of Agriculture & CLIMA, K. Siddique, CLIMA, K. Adhikari, Department of Agriculture & CLIMA, M. Harries, CLIMA
Kaspa in the WA Grain Belt 2003-2004, Ian Pritchard, Department of Agriculture
New annual pastures for Mediterranean farming systems, Angelo Loi, Phil Nichols, Clinton Revell & David Ferris, Department of Agriculture
Challenging herbicide resistant ryegrass, Bill Roy, Agricultural Consulting & Research Services Pty.Ltd
WEED MANAGEMENT
Ingest, incinerate or invert? The proβs and conβs of 3 weed seed removal tactics, Sally Peltzer1, Dave Minkey1 and Michael Walsh2 Department of Agriculture 1 and Western Australian Herbicide Resistance lnitiative2
A good use guide for pre-emergent herbicides, Alexandra Douglas, Department of Agriculture
OTHER USEFUL INFORMATION
17.Growing season outlook, Meredith Fairbanks, Ian Foster, Geraldine Pasqual, David Stephens, Nicola Telcik, David Tennant, Department of Agriculture
18. Status Of Department Of Agriculture Western Australia Crop Varieties
19. Seed Licensee Details
20. Gene technology for growers. What is it? How does it Work? Belinda Barr, Australian Centre for Plant Functional Genomics, Dr Heather Bray, Molecular Plant Breeding Cooperative Research Centre.
21. Agronomic package for EGA Eagle Rock, Steve Penny, Department of Agriculture
22. Nutrient timing and requirements for increased crop yields in the high rainfall cropping zone, Narelle Hill, Ron McTaggart, Dr. Wal Anderson and Ray Tugwell Department of Agriculture
23. Insect contamination of cereal grain at harvest, Svetlana Micic and Phil Michael, Department of Agriculture
24. Crop leftovers: whatβs in stubble for sheep? Roy Butler and Keith Croker, Department of Agriculture
25. Mandelup β Narrow-leafed lupi
Hydration of dicalcium silicate and diffusion through neo-formed calcium-silicate-hydrates at weathered surfaces control the long-term leaching behaviour of basic oxygen furnace (BOF) steelmaking slag
Alkalinity generation and toxic trace metal (such as vanadium) leaching from basic oxygen furnace (BOF) steel slag particles must be properly understood and managed by pre-conditioning if beneficial reuse of slag is to be maximised. Water leaching under aerated conditions was investigated using fresh BOF slag at three different particle sizes (0.5β1.0, 2β5 and 10βΓβ10βΓβ20 mm blocks) and a 6-month pre-weathered block. There were several distinct leaching stages observed over time associated with different phases controlling the solution chemistry: (1) free-lime (CaO) dissolution (days 0β2); (2) dicalcium silicate (CaβSiOβ) dissolution (days 2β14) and (3) CaβSiβH and CaCOβ formation and subsequent dissolution (days 14β73). Experiments with the smallest size fraction resulted in the highest Ca, Si and V concentrations, highlighting the role of surface area in controlling initial leaching. After ~2 weeks, the solution Ca/Si ratio (0.7β0.9) evolved to equal those found within a CaβSiβH phase that replaced dicalcium silicate and free-lime phases in a 30- to 150-ΞΌm altered surface region. V release was a two-stage process; initially, V was released by dicalcium silicate dissolution, but V also isomorphically substituted for Si into the neo-formed CaβSiβH in the alteration zone. Therefore, on longer timescales, the release of V to solution was primarily controlled by considerably slower CaβSiβH dissolution rates, which decreased the rate of V release by an order of magnitude. Overall, the results indicate that the BOF slag leaching mechanism evolves from a situation initially dominated by rapid hydration and dissolution of primary dicalcium silicate/free-lime phases, to a slow diffusion limited process controlled by the solubility of secondary CaβSiβH and CaCOβ phases that replace and cover more reactive primary slag phases at particle surfaces
Guiding principles for the development and application of solid-phase phosphorus adsorbents for freshwater ecosystems
While a diverse array of phosphorus (P)-adsorbent materials is currently available for application to freshwater aquatic systems, selection of the most appropriate P-adsorbents remains problematic. In particular, there has to be a close correspondence between attributes of the P-adsorbent, its field performance, and the management goals for treatment. These management goals may vary from a rapid reduction in dissolved P to address seasonal enrichments from internal loading, targeting external fluxes due to anthropogenic sources, or long term inactivation of internal P inventories contained within bottom sediments. It also remains a challenge to develop new methods and materials that are ecologically benign and cost-effective. We draw on evidence in the literature and the authorsβ personal experiences in the field, to summarise the attributes of a range of P-adsorbent materials. We offer 'guiding principles' to support practical use of existing materials and outline key development needs for new materials
Semi-empirical relationships to assess the seismic performance of slopes from an updated version of the Italian seismic database
Funder: Dipartimento della Protezione Civile, Presidenza del Consiglio dei Ministri; doi: http://dx.doi.org/10.13039/100012783; Grant(s): ReLUIS research project - Working Pachage 16: Geotechnical Engineering - Task Group 2: Slope stabilityAbstractSeismic performance of slopes can be assessed through displacement-based procedures where earthquake-induced displacements are usually computed following Newmark-type calculations. These can be adopted to perform a parametric integration of earthquake records to evaluate permanent displacements for different slope characteristics and seismic input properties. Several semi-empirical relationships can be obtained for different purposes: obtaining site-specific displacement hazard curves following a fully-probabilistic approach, to assess the seismic risk associated with the slope; providing semi-empirical models within a deterministic framework, where the seismic-induced permanent displacement is compared with threshold values related to different levels of seismic performance; calibrating the seismic coefficient to be used in pseudo-static calculations, where a safety factor against limit conditions is computed. In this paper, semi-empirical relationships are obtained as a result of a parametric integration of an updated version of the Italian strong-motion database, that, in turn, is described and compared to older versions of the database and to well-known ground motion prediction equations. Permanent displacement is expressed as a function of either ground motion parameters, for a given yield seismic coefficient of the slope, or of both ground motion parameters and the seismic coefficient. The first are meant to be used as a tool to develop site-specific displacement hazard curves, while the last can be used to evaluate earthquake-induced slope displacements, as well as to calibrate the seismic coefficient to be used in a pseudo-static analysis. Influence of the vertical component of seismic motion on these semi-empirical relationships is also assessed.</jats:p
Too Big to Fail β U.S. Banksβ Regulatory Alchemy: Converting an Obscure Agency Footnote into an βAt Willβ Nullification of Dodd-Frankβs Regulation of the Multi-Trillion Dollar Financial Swaps Market
The multi-trillion-dollar market for, what was at that time wholly unregulated, over-the-counter derivatives (βswapsβ) is widely viewed as a principal cause of the 2008 worldwide financial meltdown. The Dodd-Frank Act, signed into law on July 21, 2010, was expressly considered by Congress to be a remedy for this troublesome deregulatory problem. The legislation required the swaps market to comply with a host of business conduct and anti-competitive protections, including that the swaps market be fully transparent to U.S. financial regulators, collateralized, and capitalized. The statute also expressly provides that it would cover foreign subsidiaries of big U.S. financial institutions if their swaps trading could adversely impact the U.S. economy or represent the use of extraterritorial trades as an attempt to βevadeβ Dodd-Frank. In July 2013, the CFTC promulgated an 80-page, triple-columned, and single-spaced βguidanceβ implementing Dodd-Frankβs extraterritorial reach, i.e., that manner in which Dodd-Frank would apply to swaps transactions executed outside the United States. The key point of that guidance was that swaps trading within the βguaranteedβ foreign subsidiaries of U.S. bank holding company swaps dealers were subject to all of Dodd-Frankβs swaps regulations wherever in the world those subsidiariesβ swaps were executed. At that time, the standardized industry swaps agreement contemplated that, inter alia, U.S. bank holding company swaps dealersβ foreign subsidiaries would be βguaranteedβ by their corporate parent, as was true since 1992. In August 2013, without notifying the CFTC, the principal U.S. bank holding company swaps dealer trade association privately circulated to its members standard contractual language that would, for the first time, βdeguaranteeβ their foreign subsidiaries. By relying only on the obscure footnote 563 of the CFTC guidanceβs 662 footnotes, the trade association assured its swaps dealer members that the newly deguaranteed foreign subsidiaries could (if they so chose) no longer be subject to Dodd-Frank. As a result, it has been reported (and it also has been understood by many experts within the swaps industry) that a substantial portion of the U.S. swaps market has shifted from the large U.S. bank holding companies swaps dealers and their U.S. affiliates to their newly deguaranteed βforeignβ subsidiaries, with the attendant claim by these huge big U.S. bank swaps dealers that Dodd-Frank swaps regulation would not apply to these transactions. The CFTC also soon discovered that these huge U.S. bank holding company swaps dealers were βarranging, negotiating, and executingβ (βANEβ) these swaps in the United States with U.S. bank personnel and, only after execution in the U.S., were these swaps formally βassignedβ to the U.S. banksβ newly βdeguaranteedβ foreign subsidiaries with the accompanying claim that these swaps, even though executed in the U.S., were not covered by Dodd-Frank. In October 2016, the CFTC proposed a rule that would have closed the βdeguaranteeβ and βANEβ loopholes completely. However, because it usually takes at least a year to finalize a βproposedβ rule, this proposed rule closing the loopholes in question was not finalized prior to the inauguration of President Trump. All indications are that it will never be finalized during a Trump Administration. Thus, in the shadow of the recent tenth anniversary of the Lehman failure, there is an understanding among many market regulators and swaps trading experts that large portions of the swaps market have moved from U.S. bank holding company swaps dealers and their U.S. affiliates to their newly deguaranteed foreign affiliates where Dodd- Frank swaps regulation is not being followed. However, what has not moved abroad is the very real obligation of the lender of last resort to rescue these U.S. swaps dealer bank holding companies if they fail because of poorly regulated swaps in their deguaranteed foreign subsidiaries, i.e., the U.S. taxpayer. While relief is unlikely to be forthcoming from the Trump Administration or the Republican-controlled Senate, some other means will have to be found to avert another multi-trillion-dollar bank bailout and/or a financial calamity caused by poorly regulated swaps on the books of big U.S. banks. This paper notes that the relevant statutory framework affords state attorneys general and state financial regulators the right to bring so-called βparens patriaeβ actions in federal district court to enforce, inter alia, Dodd- Frank on behalf of a stateβs citizens. That kind of litigation to enforce the statuteβs extraterritorial provisions is now badly needed
Neocortical Axon Arbors Trade-off Material and Conduction Delay Conservation
The brain contains a complex network of axons rapidly communicating information between billions of synaptically connected neurons. The morphology of individual axons, therefore, defines the course of information flow within the brain. More than a century ago, RamΓ³n y Cajal proposed that conservation laws to save material (wire) length and limit conduction delay regulate the design of individual axon arbors in cerebral cortex. Yet the spatial and temporal communication costs of single neocortical axons remain undefined. Here, using reconstructions of in vivo labelled excitatory spiny cell and inhibitory basket cell intracortical axons combined with a variety of graph optimization algorithms, we empirically investigated Cajal's conservation laws in cerebral cortex for whole three-dimensional (3D) axon arbors, to our knowledge the first study of its kind. We found intracortical axons were significantly longer than optimal. The temporal cost of cortical axons was also suboptimal though far superior to wire-minimized arbors. We discovered that cortical axon branching appears to promote a low temporal dispersion of axonal latencies and a tight relationship between cortical distance and axonal latency. In addition, inhibitory basket cell axonal latencies may occur within a much narrower temporal window than excitatory spiny cell axons, which may help boost signal detection. Thus, to optimize neuronal network communication we find that a modest excess of axonal wire is traded-off to enhance arbor temporal economy and precision. Our results offer insight into the principles of brain organization and communication in and development of grey matter, where temporal precision is a crucial prerequisite for coincidence detection, synchronization and rapid network oscillations
The Causal Cascade to Multiple Sclerosis: A Model for MS Pathogenesis
BACKGROUND: MS pathogenesis seems to involve both genetic susceptibility and environmental risk factors. Three sequential factors are implicated in the environmental risk. The first acts near birth, the second acts during childhood, and the third acts long thereafter. Two candidate factors (vitamin D deficiency and Epstein-Barr viral infection) seem well suited to the first two environmental events. METHODOLOGY/PRINCIPAL FINDINGS: A mathematical Model for MS pathogenesis is developed, incorporating these environmental and genetic factors into a causal scheme that can explain some of the recent changes in MS-epidemiology (e.g., increasing disease prevalence, a changing sex-ratio, and regional variations in monozygotic twin concordance rates). CONCLUSIONS/SIGNIFICANCE: This Model suggests that genetic susceptibility is overwhelmingly the most important determinant of MS pathogenesis. Indeed, over 99% of individuals seem genetically incapable of developing MS, regardless of what environmental exposures they experience. Nevertheless, the contribution of specific genes to MS-susceptibility seems only modest. Thus, despite HLA DRB1*1501 being the most consistently identified genetic marker of MS-susceptibility (being present in over 50% of northern MS patient populations), only about 1% of individuals with this allele are even genetically susceptible to getting MS. Moreover, because genetic susceptibility seems so similar throughout North America and Europe, environmental differences principally determine the regional variations in disease characteristics. Additionally, despite 75% of MS-patients being women, men are 60% more likely to be genetically-susceptible than women. Also, men develop MS at lower levels of environmental exposure than women. Nevertheless, women are more responsive to the recent changes in environmental-exposure (whatever these have been). This explains both the changing sex-ratio and the increasing disease prevalence (which has increased by a minimum of 32% in Canada over the past 35 years). As noted, environmental risk seems to result from three sequential components of environmental exposure. The potential importance of this Model for MS pathogenesis is that, if correct, a therapeutic strategy, designed to interrupt one or more of these sequential factors, has the potential to markedly reduce or eliminate disease prevalence in the future
Integrin Clustering Is Driven by Mechanical Resistance from the Glycocalyx and the Substrate
Integrins have emerged as key sensory molecules that translate chemical and physical cues from the extracellular matrix (ECM) into biochemical signals that regulate cell behavior. Integrins function by clustering into adhesion plaques, but the molecular mechanisms that drive integrin clustering in response to interaction with the ECM remain unclear. To explore how deformations in the cell-ECM interface influence integrin clustering, we developed a spatial-temporal simulation that integrates the micro-mechanics of the cell, glycocalyx, and ECM with a simple chemical model of integrin activation and ligand interaction. Due to mechanical coupling, we find that integrin-ligand interactions are highly cooperative, and this cooperativity is sufficient to drive integrin clustering even in the absence of cytoskeletal crosslinking or homotypic integrin-integrin interactions. The glycocalyx largely mediates this cooperativity and hence may be a key regulator of integrin function. Remarkably, integrin clustering in the model is naturally responsive to the chemical and physical properties of the ECM, including ligand density, matrix rigidity, and the chemical affinity of ligand for receptor. Consistent with experimental observations, we find that integrin clustering is robust on rigid substrates with high ligand density, but is impaired on substrates that are highly compliant or have low ligand density. We thus demonstrate how integrins themselves could function as sensory molecules that begin sensing matrix properties even before large multi-molecular adhesion complexes are assembled
- β¦