442 research outputs found
The Apolipoprotein M/S1P Axis Controls Triglyceride Metabolism and Brown Fat Activity
Summary: Apolipoprotein M (apoM) is the carrier of sphingosine-1-phosphate (S1P) in plasma high-density lipoproteins. S1P is a bioactive lipid interacting with five receptors (S1P1–5). We show that lack of apoM in mice increases the amount of brown adipose tissue (BAT), accelerates the clearance of postprandial triglycerides, and protects against diet-induced obesity (i.e., a phenotype similar to that induced by cold exposure or β3-adrenergic stimulation). Moreover, the data suggest that the phenotype of apoM-deficient mice is S1P dependent and reflects diminished S1P1 stimulation. The results reveal a link between the apoM/S1P axis and energy metabolism. : Apolipoprotein M (apoM) is the carrier of sphingosine-1-phosphate (S1P) in lipoproteins. Christoffersen et al. show that lack of apoM in mice increases the amount of brown adipose tissue, accelerates the turnover of fat, and protects against obesity. The results reveal a link between the apoM/S1P axis and energy metabolism. Keywords: apolipoproteins, sphingolipids, sphingosine-1-phosphate, lipoproteins, lipid metabolism, triglyceride, brown adipose tissue, apo
Interleukin-2 therapy in patients with HIV infection
BACKGROUND
Used in combination with antiretroviral therapy, subcutaneous recombinant interleukin-2 raises CD4+ cell counts more than does antiretroviral therapy alone. The clinical implication of these increases is not known.
METHODS
We conducted two trials: the Subcutaneous Recombinant, Human Interleukin-2 in HIV-Infected Patients with Low CD4+ Counts under Active Antiretroviral Therapy (SILCAAT) study and the Evaluation of Subcutaneous Proleukin in a Randomized International Trial (ESPRIT). In each, patients infected with the human immunodeficiency virus (HIV) who had CD4+ cell counts of either 50 to 299 per cubic millimeter (SILCAAT) or 300 or more per cubic millimeter (ESPRIT) were randomly assigned to receive interleukin-2 plus antiretroviral therapy or antiretroviral therapy alone. The interleukin-2 regimen consisted of cycles of 5 consecutive days each, administered at 8-week intervals. The SILCAAT study involved six cycles and a dose of 4.5 million IU of interleukin-2 twice daily; ESPRIT involved three cycles and a dose of 7.5 million IU twice daily. Additional cycles were recommended to maintain the CD4+ cell count above predefined target levels. The primary end point of both studies was opportunistic disease or death from any cause.
RESULTS
In the SILCAAT study, 1695 patients (849 receiving interleukin-2 plus antiretroviral therapy and 846 receiving antiretroviral therapy alone) who had a median CD4+ cell count of 202 cells per cubic millimeter were enrolled; in ESPRIT, 4111 patients (2071 receiving interleukin-2 plus antiretroviral therapy and 2040 receiving antiretroviral therapy alone) who had a median CD4+ cell count of 457 cells per cubic millimeter were enrolled. Over a median follow-up period of 7 to 8 years, the CD4+ cell count was higher in the interleukin-2 group than in the group receiving antiretroviral therapy alone--by 53 and 159 cells per cubic millimeter, on average, in the SILCAAT study and ESPRIT, respectively. Hazard ratios for opportunistic disease or death from any cause with interleukin-2 plus antiretroviral therapy (vs. antiretroviral therapy alone) were 0.91 (95% confidence interval [CI], 0.70 to 1.18; P=0.47) in the SILCAAT study and 0.94 (95% CI, 0.75 to 1.16; P=0.55) in ESPRIT. The hazard ratios for death from any cause and for grade 4 clinical events were 1.06 (P=0.73) and 1.10 (P=0.35), respectively, in the SILCAAT study and 0.90 (P=0.42) and 1.23 (P=0.003), respectively, in ESPRIT.
CONCLUSIONS
Despite a substantial and sustained increase in the CD4+ cell count, as compared with antiretroviral therapy alone, interleukin-2 plus antiretroviral therapy yielded no clinical benefit in either study. (ClinicalTrials.gov numbers, NCT00004978 [ESPRIT] and NCT00013611 [SILCAAT study].
Morphology of supported polymer electrolyte ultra-thin films: a numerical study
Morphology of polymer electrolytes membranes (PEM), e.g., Nafion, inside PEM
fuel cell catalyst layers has significant impact on the electrochemical
activity and transport phenomena that determine cell performance. In those
regions, Nafion can be found as an ultra-thin film, coating the catalyst and
the catalyst support surfaces. The impact of the hydrophilic/hydrophobic
character of these surfaces on the structural formation of the films has not
been sufficiently explored yet. Here, we report about Molecular Dynamics
simulation investigation of the substrate effects on the ionomer ultra-thin
film morphology at different hydration levels. We use a mean-field-like model
we introduced in previous publications for the interaction of the hydrated
Nafion ionomer with a substrate, characterized by a tunable degree of
hydrophilicity. We show that the affinity of the substrate with water plays a
crucial role in the molecular rearrangement of the ionomer film, resulting in
completely different morphologies. Detailed structural description in different
regions of the film shows evidences of strongly heterogeneous behavior. A
qualitative discussion of the implications of our observations on the PEMFC
catalyst layer performance is finally proposed
Contestation, contingency, and justice in the Nordic low-carbon energy transition
The five Nordic countries have aggressive climate and energy policies in place and have already emerged to be leaders in renewable energy and energy efficiency. Denmark is renowned for its pioneering use of wind energy, Finland and Sweden bioenergy, Norway hydroelectricity and Iceland geothermal energy. All countries aim to be virtually “fossil free” by 2050. This study explores the Nordic energy transition through the lens of three interconnected research questions: How are they doing it? What challenges exist? And what broader lessons result for energy policy? The study firstly investigates the pathways necessary for these five countries to achieve their low-carbon goals. It argues that a concerted effort must be made to (1) promote decentralized and renewable forms of electricity supply; (2) shift to more sustainable forms of transport; (3) further improve the energy efficiency of residential and commercial buildings; and (4) adopt carbon capture and storage technologies for industry. However, the section that follows emphasizes some of the empirical barriers the Nordic transition must confront, namely political contestation, technological contingency, and social justice and recognition concerns. The study concludes with implications for what such historical progress, and future transition pathways, mean for both energy researchers and energy planners
Low Complexity Regularization of Linear Inverse Problems
Inverse problems and regularization theory is a central theme in contemporary
signal processing, where the goal is to reconstruct an unknown signal from
partial indirect, and possibly noisy, measurements of it. A now standard method
for recovering the unknown signal is to solve a convex optimization problem
that enforces some prior knowledge about its structure. This has proved
efficient in many problems routinely encountered in imaging sciences,
statistics and machine learning. This chapter delivers a review of recent
advances in the field where the regularization prior promotes solutions
conforming to some notion of simplicity/low-complexity. These priors encompass
as popular examples sparsity and group sparsity (to capture the compressibility
of natural signals and images), total variation and analysis sparsity (to
promote piecewise regularity), and low-rank (as natural extension of sparsity
to matrix-valued data). Our aim is to provide a unified treatment of all these
regularizations under a single umbrella, namely the theory of partial
smoothness. This framework is very general and accommodates all low-complexity
regularizers just mentioned, as well as many others. Partial smoothness turns
out to be the canonical way to encode low-dimensional models that can be linear
spaces or more general smooth manifolds. This review is intended to serve as a
one stop shop toward the understanding of the theoretical properties of the
so-regularized solutions. It covers a large spectrum including: (i) recovery
guarantees and stability to noise, both in terms of -stability and
model (manifold) identification; (ii) sensitivity analysis to perturbations of
the parameters involved (in particular the observations), with applications to
unbiased risk estimation ; (iii) convergence properties of the forward-backward
proximal splitting scheme, that is particularly well suited to solve the
corresponding large-scale regularized optimization problem
Uso de morteros catalíticos sobre paneles, para el análisis de la reducción de partículas contaminantes en el aire
Trabajo de Investigación TecnológicaEste proyecto de grado se enfoca en la contaminación del aire y el uso de las nuevas tecnologías en la construcción para combatir este problema que genera afectaciones no solo ambientales, sino en la salud humana, en la flora y la fauna.
La nanotecnología, es una rama que se desprende de las nuevas tecnologías y que se ha abierto paso en la industria de la construcción, por medio de la implementación de materiales y aditivos te tamaño nanométrico que mejoran y generan nuevas propiedades en los materiales comunes de construcción como el acero, concretos, morteros, pinturas, etc.
En este proyecto se elaboró un concreto y mortero adicionando el Dióxido de titanio (TiO2), el cual actúa como un catalizador al combinarse con el cemento y los rayos ultra violeta, y su función principal es oxidar las partículas contaminantes suspendidas en el aire, por lo cual se categoriza como un descontaminante. Adicionalmente, el TiO2 puede mejorar las propiedades del concreto.
Para comprobar el efecto del TiO2 en el concreto, se elaboraron cuatro cilindros de concreto común y de concreto adicionado, los cuales se fallaron en las edades típicas de falla y se compararon los resultados obtenidos.
De igual manera, se fabricó un mortero adicionado, el cual se colocó sobre paneles y se dejó expuesto ocho días en un área de monitoreo de aire, y con los datos obtenidos se realizó el análisis correspondiente.1 INTRODUCCIÓN
2 ANTECEDENTES
3 PLANTEAMIENTO DEL PROBLEMA
4 OBJETIVOS
5 JUSTIFICACIÓN
6 DELIMITACIONES
7 MARCO DE REFERENCIA
8 METODOLOGÍA
9 DISEÑO METODOLÓGICO.
10 CONCLUSIONES
11 RECOMENDACIONES
BIBLIOGRAFÍAPregradoIngeniero Civi
- …