2,694 research outputs found

    A technique for optimal temperature estimation for modeling sunrise/sunset thermal snap disturbance torque

    Get PDF
    A predictive temperature estimation technique which can be used to drive a model of the Sunrise/Sunset thermal 'snap' disturbance torque experienced by low Earth orbiting spacecraft is described. The twice per orbit impulsive disturbance torque is attributed to vehicle passage in and out of the Earth's shadow cone (umbra), during which large flexible appendages undergo rapidly changing thermal conditions. Flexible members, in particular solar arrays, experience rapid cooling during umbra entrance (Sunset) and rapid heating during exit (Sunrise). The thermal 'snap' phenomena has been observed during normal on-orbit operations of both the LANDSAT-4 satellite and the Communications Technology Satellite (CTS). Thermal 'snap' has also been predicted to be a dominant source of error for the TOPEX satellite. The fundamental equations used to model the Sunrise/Sunset thermal 'snap' disturbance torque for a typical solar array like structure will be described. For this derivation the array is assumed to be a thin, cantilevered beam. The time varying thermal gradient is shown to be the driving force behind predicting the thermal 'snap' disturbance torque and therefore motivates the need for accurate estimates of temperature. The development of a technique to optimally estimate appendage surface temperature is highlighted. The objective analysis method used is structured on the Gauss-Markov Theorem and provides an optimal temperature estimate at a prescribed location given data from a distributed thermal sensor network. The optimally estimated surface temperatures could then be used to compute the thermal gradient across the body. The estimation technique is demonstrated using a typical satellite solar array

    Comparison of imaging with sub-wavelength resolution in the canalization and resonant tunnelling regimes

    Full text link
    We compare the properties of subwavelength imaging in the visible wavelength range for metal-dielectric multilayers operating in the canalization and the resonant tunnelling regimes. The analysis is based on the transfer matrix method and time domain simulations. We show that Point Spread Functions for the first two resonances in the canalization regime are approximately Gaussian in shape. Material losses suppress transmission for higher resonances, regularise the PSF but do not compromise the resolution. In the resonant tunnelling regime, the MTF may dramatically vary in their phase dependence. Resulting PSF may have a sub-wavelength thickness as well as may be broad with multiple maxima and a rapid phase modulation. We show that the width of PSF may be reduced by further propagation in free space, and we provide arguments to explain this surprising observation.Comment: 17 pages,12 figure

    On the physical origins of the negative index of refraction

    Full text link
    The physical origins of negative refractive index are derived from a dilute microscopic model, producing a result that is generalized to the dense condensed phase limit. In particular, scattering from a thin sheet of electric and magnetic dipoles driven above resonance is used to form a fundamental description for negative refraction. Of practical significance, loss and dispersion are implicit in the microscopic model. While naturally occurring negative index materials are unavailable, ferromagnetic and ferroelectric materials provide device design opportunities.Comment: 4 pages, 1 figur

    Exciton coherence lifetimes from electronic structure

    Get PDF
    We model the coherent energy transfer of an electronic excitation within covalently linked aromatic homodimers from first-principles, to answer whether the usual models of the bath calculated via detailed electronic structure calculations can reproduce the key dynamics. For these systems the timescales of coherent transport are experimentally known from time-dependent polarization anisotropy measurements, and so we can directly assess the whether current techniques might be predictive for this phenomenon. Two choices of electronic basis states are investigated, and their relative merits discussed regarding the predictions of the perturbative model. The coupling of the electronic degrees of freedom to the nuclear degrees of freedom is calculated rather than assumed, and the fluorescence anisotropy decay is directly reproduced. Surprisingly we find that although TDDFT absolute energies are routinely in error by orders of magnitude more than the coupling energy, the coherent transport properties of these dimers can be semi-quantitatively reproduced from first-principles. The directions which must be pursued to yield predictive and reliable prediction of coherent transport are suggested.Comment: 22 pages, 7 figure

    Diagonalization of multicomponent wave equations with a Born-Oppenheimer example

    Get PDF
    A general method to decouple multicomponent linear wave equations is presented. First, the Weyl calculus is used to transform operator relations into relations between c-number valued matrices. Then it is shown that the symbol representing the wave operator can be diagonalized systematically up to arbitrary order in an appropriate expansion parameter. After transforming the symbols back to operators, the original problem is reduced to solving a set of linear uncoupled scalar wave equations. The procedure is exemplified for a particle with a Born-Oppenheimer-type Hamiltonian valid through second order in h. The resulting effective scalar Hamiltonians are seen to contain an additional velocity-dependent potential. This contribution has not been reported in recent studies investigating the adiabatic motion of a neutral particle moving in an inhomogeneous magnetic field. Finally, the relation of the general method to standard quantum-mechanical perturbation theory is discussed

    Scattering polarization of hydrogen lines in the presence of turbulent electric fields

    Full text link
    We study the broadband polarization of hydrogen lines produced by scattering of radiation, in the presence of isotropic electric fields. In this paper, we focus on two distinct problems: a) the possibility of detecting the presence of turbulent electric fields by polarimetric methods, and b) the influence of such fields on the polarization due to a macroscopic, deterministic magnetic field. We found that isotropic electric fields decrease the degree of linear polarization in the scattered radiation, with respect to the zero-field case. On the other hand, a distribution of isotropic electric fields superimposed onto a deterministic magnetic field can generate a significant increase of the degree of magnetic-induced, net circular polarization. This phenomenon has important implications for the diagnostics of magnetic fields in plasmas using hydrogen lines, because of the ubiquitous presence of the Holtsmark, microscopic electric field from neighbouring ions. In particular, previous solar magnetographic studies of the Balmer lines of hydrogen may need to be revised because they neglected the effect of turbulent electric fields on the polarization signals. In this work, we give explicit results for the Lyman-alpha and Balmer-alpha lines.Comment: 15 pages, 6 figure

    Two-mirror Schwarzschild aplanats. Basic relations

    Full text link
    It is shown that the theory of aplanatic two-mirror telescopes developed by Karl Schwarzschild in 1905 leads to the unified description both the prefocal and the postfocal systems. The class of surfaces in the ZEMAX optical program has been properly extended to ascertain the image quality in exact Schwarzschild aplanats. A comparison of Schwarzschild aplanats with approximate Ritchey-Chretien and Gregory-Maksutov aplanatic telescopes reveals a noticeable advantage of the former at fast focal ratio of the system.Comment: 19 page

    Casimir force calculations near the insulator-conductor transition in gold thin films

    Full text link
    We present theoretical calculations of the Casimir force for Au thin films near the insulator-conductor transition that has been observed experimentally. The dielectric function of the Au thin films is described by the Drude-Smith model. The parameters needed to model the dielectric function such as the relaxation time, plasma frequency and the backscattering constant depend on the thickness of the film. The Casimir force decreases as the film thickness decreases until it reaches a minimum after which the force increases again. The minimum of the force coincides with the critical film thickness where a percolation conductor-insulator occurs.Comment: 5 figures, 1 tabl

    Dissipation in ultra-thin current-carrying superconducting bridges; evidence for quantum tunneling of Pearl vortices

    Full text link
    We have made current-voltage (IV) measurements of artificially layered high-TcT_c thin-film bridges. Scanning SQUID microscopy of these films provides values for the Pearl lengths Λ\Lambda that exceed the bridge width, and shows that the current distributions are uniform across the bridges. At high temperatures and high currents the voltages follow the power law V∝InV \propto I^n, with n=Ί02/8π2ΛkBT+1n=\Phi_0^2/8\pi^2\Lambda k_B T+1, and at high temperatures and low-currents the resistance is exponential in temperature, in good agreement with the predictions for thermally activated vortex motion. At low temperatures, the IV's are better fit by ln⁥V\ln V linear in I−2I^{-2}. This is expected if the low temperature dissipation is dominated by quantum tunneling of Pearl vortices.Comment: 5 pages, 7 fig

    Completeness of evanescent modes in layered dielectrics

    Get PDF
    In the presence of a dielectric slab, the modes of the free electromagnetic field comprise traveling modes, consisting of incoming, reflected, and transmitted parts, as well as trapped modes that are subject to repeated total internal reflection and emerge as evanescent field outside the slab. Traveling modes have a continuous range of frequencies, but trapped modes occur only at certain discrete frequencies. We solve the problem of which relative weight to use when summing over all modes, as commonly required in perturbative calculations. We demonstrate the correctness of our method by showing the completeness of electromagnetic field modes in the presence of a dielectric slab. We derive a convenient method of summing over all modes by means of a single contour integral, which is very useful in standard quantum electrodynamic calculations
    • 

    corecore