Exploiting Cationic Vacancies for Increased Energy Densities in Dual-Ion Batteries

© 2019 Elsevier B.V. Dual-ion Li–Mg batteries offer a potential route to cells that combine desirable properties of both single-ion species. To maximize the energy density of a dual-ion battery, we propose a strategy for achieving simultaneous intercalation of both ionic species, by chemically modifying the intercalation host material to produce a second, complementary, class of insertion sites. We show that donor-doping of anatase TiO2 to form large numbers of cationic vacancies allows the complementary insertion of Li+ and Mg2+ in a dual-ion cell with a net increase in cell energy density, due to a combination of an increased reversible capacity, an increased operating voltage, and a reduced polarization. By tuning the lithium concentration in the electrolyte, we achieve full utilization of the Ti4+/Ti3+ redox couple with excellent cyclability and rate capability. We conclude that native interstitial sites preferentially accommodate Li+ ions, while Mg2+ ions occupy single-vacancy sites. We also predict a narrow range of electrochemical conditions where adjacent vacancy pairs preferentially accommodate one ion of each species, i.e., a [LiTi ​+ ​MgTi] configuration. These results demonstrate the implementation of additional host sites such as cationic sites as an effective approach to increase the energy density in dual-ion batteries

Understanding improved electrochemical properties of NiO-doped NiF2-C composite conversion materials by X-ray absorption spectroscopy and pair distribution function analysis.

The conversion reactions of pure NiF2 and the NiO-doped NiF2-C composite (NiO-NiF2-C) were investigated using X-ray absorption spectroscopy (XAS) and pair distribution function (PDF) analysis. The enhanced electronic conductivity of NiO-NiF2-C is associated with a significant improvement in the reversibility of the conversion reaction compared to pure NiF2. Different evolutions of the size distributions of the Ni nanoparticles formed during discharge were observed. While a bimodal nanoparticle size distribution was maintained for NiO-NiF2-C following the 1st and 2nd discharge, for pure NiF2 only smaller nanoparticles (∼14 Å) remained following the 2nd discharge. We postulate that the solid electrolyte interphase formed upon the 1st discharge at large overpotential retards the growth of metallic Ni leading to formation of smaller Ni particles during the 2nd discharge. In contrast, the NiO doping and the carbon layer covering the NiO-NiF2-C possibly facilitate the conversion process on the surface preserving the reaction kinetics upon the 2nd discharge. Based on the electronic conductivity and surface properties, the resulting size of the Ni nanoparticles is associated with the conversion kinetics and consequently the cyclability

Impact of Solution Chemistry on Growth and Structural Features of Mo-Substituted Spinel Iron Oxides

International audienceThe effect of crystallizing solution chemistry on the chemistry of subsequently as-grown materials was investigated for Mo-substituted iron oxides prepared by thermally activated co-precipitation. In the presence of Mo ions, we find that varying the oxidation state of the iron precursor from Fe(II) to Fe(III) causes a progressive loss of atomic long-range order with the stabilization of 2–4 nm particles for the sample prepared with Fe(III). The oxidation state of the Fe precursor also affects the distribution of Fe and Mo cations within the spinel structure. Increasing the Fe precursor oxidation state gives decreased Fe-ion occupation and increased Mo-ion occupation of tetrahedral sites, as revealed by the extended X-ray absorption fine structure. The stabilization of Mo within tetrahedral sites appears to be unexpected, considering the octahedral preferred coordination number of Mo(VI). The analysis of the atomic structure of the sample prepared with Fe(III) indicates a local ordering of vacancies and that the occupation of tetrahedral sites by Mo induces a contraction of the interatomic distances within the polyhedra as compared to Fe atoms. Moreover, the occupancy of Mo into the thermodynamic site preference of a Mo dopant in Fe2O3 assessed by density functional theory calculations points to a stronger preference for Mo substitution at octahedral sites. Hence, we suggest that the synthetized compound is thermodynamically metastable, that is, kinetically trapped. Such a state is suggested to be a consequence of the tetrahedral site occupation by Mo ions. The population of these sites, known to be reactive sites enabling particle growth, is concomitant with the stabilization of very small particles. We confirmed our hypothesis by using a blank experiment without Mo ions, further supporting the impact of tetrahedral Mo ions on the growth of iron oxide nanoparticles. Our findings provide new insights into the relationships between the Fe-chemistry of the crystallizing solution and the structural features of the as-grown Mo-substituted Fe-oxide materials

Impact of Solution Chemistry on Growth and Structural Features of Mo-Substituted Spinel Iron Oxides

The effect of crystallizing solution chemistry on the chemistry of subsequently as-grown materials was investigated for Mo-substituted iron oxides prepared by thermally activated co-precipitation. In the presence of Mo ions, we find that varying the oxidation state of the iron precursor from Fe(II) to Fe(III) causes a progressive loss of atomic long-range order with the stabilization of 2-4 nm particles for the sample prepared with Fe(III). The oxidation state of the Fe precursor also affects the distribution of Fe and Mo cations within the spinel structure. Increasing the Fe precursor oxidation state gives decreased Fe-ion occupation and increased Mo-ion occupation of tetrahedral sites, as revealed by the extended X-ray absorption fine structure. The stabilization of Mo within tetrahedral sites appears to be unexpected, considering the octahedral preferred coordination number of Mo(VI). The analysis of the atomic structure of the sample prepared with Fe(III) indicates a local ordering of vacancies and that the occupation of tetrahedral sites by Mo induces a contraction of the interatomic distances within the polyhedra as compared to Fe atoms. Moreover, the occupancy of Mo into the thermodynamic site preference of a Mo dopant in Fe2O3 assessed by density functional theory calculations points to a stronger preference for Mo substitution at octahedral sites. Hence, we suggest that the synthetized compound is thermodynamically metastable, that is, kinetically trapped. Such a state is suggested to be a consequence of the tetrahedral site occupation by Mo ions. The population of these sites, known to be reactive sites enabling particle growth, is concomitant with the stabilization of very small particles. We confirmed our hypothesis by using a blank experiment without Mo ions, further supporting the impact of tetrahedral Mo ions on the growth of iron oxide nanoparticles. Our findings provide new insights into the relationships between the Fe-chemistry of the crystallizing solution and the structural features of the as-grown Mo-substituted Fe-oxide materials. </p

A radially accessible tubular in situ X-ray cell for spatially resolved operando scattering and spectroscopic studies of electrochemical energy storage devices

A tubular operando electrochemical cell has been developed to allow spatially resolved X-ray scattering and spectroscopic measurements of individual cell components, or regions thereof, during device operation. These measurements are enabled by the tubular cell geometry, wherein the X-ray-transparent tube walls allow radial access for the incident and scattered/transmitted X-ray beam; by probing different depths within the electrode stack, the transformation of different components or regions can be resolved. The cell is compatible with a variety of synchrotron-based scattering, absorption and imaging methodologies. The reliability of the electrochemical cell and the quality of the resulting X-ray scattering and spectroscopic data are demonstrated for two types of energy storage: the evolution of the distribution of the state of charge of an Li-ion battery electrode during cycling is documented using X-ray powder diffraction, and the redistribution of ions between two porous carbon electrodes in an electrochemical double-layer capacitor is documented using X-ray absorption near-edge spectroscopy

Atomic Insights into Aluminium-Ion Insertion in Defective Anatase for Batteries

International audienceAluminium batteries constitute a safe and sustainable high‐energy‐density electrochemical energy‐storage solution. Viable Al‐ion batteries require suitable electrode materials that can readily intercalate high‐charge Al3+ ions. Here, we investigate the Al3+ intercalation chemistry of anatase TiO2 and how chemical modifications influence the accommodation of Al3+ ions. We use fluoride‐ and hydroxide‐doping to generate high concentrations of titanium vacancies. The coexistence of these hetero‐anions and titanium vacancies leads to a complex insertion mechanism, attributed to three distinct types of host sites: native interstitial sites, single vacancy sites, and paired vacancy sites. We demonstrate that Al3+ induces a strong local distortion within the modified TiO2 structure, which affects the insertion properties of the neighbouring host sites. Overall, specific structural features induced by the intercalation of highly polarising Al3+ ions should be considered when designing new electrode materials for polyvalent batteries

The electrochemical storage mechanism in oxy-hydroxyfluorinated anatase for sodium-ion batteries

International audienceReplacing lithium ions with sodium ions as the charge carriers in rechargeable batteries can induce noticeable differences in the electrochemical storage mechanisms of electrode materials. Many material parameters, such as particle size, morphology, and the presence of defects, are known to further affect the storage mechanism. Here, we report an investigation of how the introduction of titanium vacancies into anatase TiO2 affects the sodium storage mechanism. From pair distribution function analysis, we observe that sodium ions are inserted into titanium vacancies at the early stage of the discharge process. This is supported by density functional theory calculations, which predict that sodium insertion is more favourable at vacancies than at interstitial sites. Our calculations also show that the intercalation voltage is sensitive to the anion coordination environment of the vacancy. Sodiation to higher concentrations induces a phase transition toward a disordered rhombohedral structure, similar to that observed in defect-free TiO2. Finally, we find that the X-ray diffraction pattern of the rhombohedral phase drastically changes depending on the composition and degree of disorder, providing further comprehension on the sodium storage mechanism of anatase

The Director’s Method in Contemporary Visual Effects Film: The Influence of Digital Effects on Film Directing

The director’ s method – meant as the organisation of the filmmaking process – is usually characterised by common procedures such as work on the script, shot design and the actors’ performance. For films involving a large-scale use of digital effects, directors consistently approach such procedures with a particular attitude dictated by the digital pipeline, the step-by-step technical procedure through which computer-generated images are created. In light of this, the use of digital effects might influence the director’s method. This thesis aims to define what is considered to be a consensual methodological approach to direct films with no or few digital effects and then compares this approach to when such effects are conspicuously involved. This analysis is conducted through interviews with working directors, visual effects companies and practitioners, and integrated with the current literature. The frame of the research is represented by a large spectrum of contemporary films produced in western countries and which involve digital effects at different scales and complexity but always in interaction with live-action. The research focuses on commercial films and excludes computer-animated and experimental films. The research is intended to address an area in production studies which is overlooked. In fact, although the existent literature examines both digital effects and film directing as distinct elements, there is to date no detailed analysis on the influence that the former has on the latter. In light of this, this dissertation seeks to fill a gap in production studies. The research looks to argue that the director’s method has been changed by the advent of digital effects; it describes a common workflow for digital effects film and notes the differences between this method and the method applied when digital effects are not involved. This is of significant importance for a film industry which is heavily dependent on such effects, as the analysis on contemporary filmmaking reveal

Lithiation Thermodynamics and Kinetics of the TiO2 (B) Nanoparticles

TiO2 (B) has attracted considerable attention in recent years because it exhibits the largest capacity among all studied titania polymorphs, with high rate performance for Li intercalation being achieved when this material is nanostructured. However, due to the complex nature of its lithiation mechanism and practical challenges in probing Li structure in nanostructured materials, a definitive understanding of the lithiation thermodynamics has yet to be established. A comprehensive mechanistic investigation of the TiO2 (B) nanoparticles is therefore presented using a combination of in situ / operando X-ray pair distribution function (PDF) and electrochemical techniques. The discharge begins with surface reactions in parallel with Li insertion into the sub-surface of the nanoparticles. The Li bulk insertion starts with a single-phase reaction into the A2 site, a position adjacent to the b-channel. A change of the Li diffusion pathway from that along this open channel to that along the c-direction is likely to occur at the composition of Li0.25TiO2 until Li0.5TiO2 is attained, leading to a two-step A2-site incorporation with one step kinetically distinct from the other. Subsequent Li insertion involves the C’ site, a position situated inside the channel, and follows a rapid two-phase reaction to form Li0.75TiO2. Due to the high diffusion barrier associated with the further lithiation, Li insertion into the A1 site, another position adjacent to the channel neighboring the A2 sites, is kinetically restricted. This study not only explores the lithiation reaction thermodynamics and mechanisms of nanoparticulate TiO2 (B), but also serves as a strong reference for future studies of the bulk phase, and for future calculations to study the Li transport properties of TiO2 (B).We acknowledge the funding from the Swiss NRP70 “Energy Turnaround” program and EPSRC via the “nanoionics” grant. Use of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Journal of the American Chemical Society Article Office of Science by Argonne National Laboratory, was supported by the U.S. DOE under Contract No. DE-AC02- 06CH11357