4,905 research outputs found
Nanoscale roughness and morphology affect the IsoElectric Point of titania surfaces
We report on the systematic investigation of the role of surface nanoscale
roughness and morphology on the charging behaviour of nanostructured titania
(TiO2) surfaces in aqueous solutions. IsoElectric Points (IEPs) of surfaces
have been characterized by direct measurement of the electrostatic double layer
interactions between titania surfaces and the micrometer-sized spherical silica
probe of an atomic force microscope in NaCl aqueous electrolyte. The use of a
colloidal probe provides well-defined interaction geometry and allows
effectively probing the overall effect of nanoscale morphology. By using
supersonic cluster beam deposition to fabricate nanostructured titania films,
we achieved a quantitative control over the surface morphological parameters.
We performed a systematical exploration of the electrical double layer
properties in different interaction regimes characterized by different ratios
of characteristic nanometric lengths of the system: the surface rms roughness
Rq, the correlation length {\xi} and the Debye length {\lambda}D. We observed a
remarkable reduction by several pH units of IEP on rough nanostructured
surfaces, with respect to flat crystalline rutile TiO2. In order to explain the
observed behavior of IEP, we consider the roughness-induced self-overlap of the
electrical double layers as a potential source of deviation from the trend
expected for flat surfaces.Comment: 63 pages, including 7 figures and Supporting Informatio
A Novel Hybrid Microdosimeter for Radiation Field Characterization Based on the Tissue Equivalent Proportional Counter Detector and Low Gain Avalanche Detectors Tracker: A Feasibility Study
Definizione, acquisizione sperimentale ed elaborazione di traiettorie di riferimento della mano umana per la sintesi di architetture protesiche di arto superiore
This paper reports an essential part of a wider research activity, which entails the development of a procedure for the Determination of the Optimal Prosthesis Architecture (DOPA) for a given upper limb amputee. A fundamental algorithm of the DOPA procedure performs the kinematic analysis of several prosthetic arm models (also with less than the six degrees of freedom normally required to correctly execute a generic manipulation task). The algorithm must simulate the execution of important daily living activities performed by a prosthesis and thus it requires reference trajectories of the hand. By means of experimental analysis, 59 trajectories of the hand of an able-bodied subject were acquired to identify a modality to correctly perform the corresponding tasks. This paper illustrates in detail the stages of task analysis, experimental acquisition and data processing in order to define the required reference trajectories. The obtained reference trajectories are a temporal succession of the hand pose (position and orientation). A customized algorithm automatically selects the most relevant poses to be considered for the definition of the reference trajectory. The hand pose is reported in the Cartesian Space by means of Natural Coordinates. In order to correctly execute a given task the pose error admitted for the end-effector of the different architectures is associated to each trajectory. In particular, the critical problem to express the orientation error is solved by means of the use of Spherical Rotation Coordinates
Palbociclib in a patient with HR+/HER2- advanced breast cancer and HIV1 infection: A case report
The use of drugs that affect the cell cycle represents one of the common strategies for the control of some unrelated pathologies, such as chronic viral HIV infections or cancer. The authors report the case of a patient followed for a hormone receptor-positive (HR+)/HER2 negative (HER2-) advanced breast cancer, treated with hormone therapy and CDK 4/6 inhibitors, and a concomitant HIV infection under antiretroviral treatment. The authors consider the function of the sterile alpha motif and HD domain-containing protein-1 (SAMHD1) enzyme, its implications in the control of viral replication and the correlation between its activity and the mechanism of action of the CDK 4/6 inhibitor palbociclib
Inverse Estimation of Temperature Profiles in Landfills Using Heat Recovery Fluids Measurements
In addition to leachate and gas emission analysis, temperature variations in municipal solid waste landfills are routinely monitored for safety and health reasons, such as the increased production of biogas or the danger of spontaneous combustion phenomena if the temperature exceeds 70–75°C. The increasing constraints on greenhouse gas emissions and the convenience of fuel and heat recovery have helped develop a global approach to landfills' operation and maintenance, generally referred to as bioreactor landfill management. The heat recovery piping we are presently designing can be a significant part of this approach. The heat gained by a fluid circulated in a closed network through the landfill is transferred to an external heat exchanger or used directly as warm water. Additionally, it can help reduce landfill temperature levels and control biogas generation. Since the pipes diameter is large enough to allow for a radial temperature gradient, this information can be used for an inverse estimation of the temperature profile in the landfill which constitutes the boundary conditions of the resulting heat transfer problem. In this paper, we describe an algorithm for regularising the resulting ill-posed free boundary estimation problem using sampled data of the heat recovery fluid on exiting the landfill
An integrated 0D/1D/3D numerical framework to predict performance, emissions, knock and heat transfer in ICEs fueled with NH3–H2 mixtures: The conversion of a marine Diesel engine as case study
In the maritime transportation, e-fuels represent a valid alternative to fossil energy sour-
ces, in order to accomplish the European Union goals in terms of climate neutrality. Among
the e-fuels, the ammonia-hydrogen mixtures can play a leading role, as the combination of
the two allows to exploit the advantages of each one, simultaneously compensating their
gaps.
The main goal of the present publication is the proposal of a robust numerical frame-
work based on 0D, 1D and 3D tools for CFD analyses of internal combustion engines fueled
with ammonia-hydrogen mixtures.
The 1D engine model provides boundary conditions for the multi-dimensional in-
vestigations and estimates the overall engine performance. 3D in-cylinder detailed ana-
lyses are proficiently used to predict combustion efficiency (via the well-established
G-equation model supported by laminar flame speed correlations for both ammonia and
hydrogen) and emissions (with a detailed chemistry based approach). Heat transfer and
knock tendency are evaluated as well, by in-house developed models. As for the 0D/1D
chemical kinetics calculations, firstly they support 3D analyses (for example via the gen-
eration of ignition delay time tables). Moreover, they allow insights on aspects such as NOx
formation, to individuate mixture qualities able to strongly reduce the emissions
Purine Metabolism Dysfunctions: Experimental Methods of Detection and Diagnostic Potential
Purines, such as adenine and guanine, perform several important functions in the cell. They are found in nucleic acids; are structural components of some coenzymes, including NADH and coenzyme A; and have a crucial role in the modulation of energy metabolism and signal transduction. Moreover, purines have been shown to play an important role in the physiology of platelets, muscles, and neurotransmission. All cells require a balanced number of purines for growth, proliferation, and survival. Under physiological conditions, enzymes involved in purines metabolism maintain a balanced ratio between their synthesis and degradation in the cell. In humans, the final product of purine catabolism is uric acid, while most other mammals possess the enzyme uricase that converts uric acid to allantoin, which can be easily eliminated with urine. During the last decades, hyperuricemia has been associated with a number of human extra-articular diseases (in particular, the cardiovascular ones) and their clinical severity. In this review, we go through the methods of investigation of purine metabolism dysfunctions, looking at the functionality of xanthine oxidoreductase and the formation of catabolites in urine and saliva. Finally, we discuss how these molecules can be used as markers of oxidative stress
Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study
Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong
improvement both in sensitivity and angular resolution compared to all
instruments that have operated so far above 10 keV. The superb hard X-ray
imaging capability will be guaranteed by a mirror module of 100 electroformed
Nickel shells with a multilayer reflecting coating. Here we will describe the
technogical development and solutions adopted for the fabrication of the mirror
module, that must guarantee an Half Energy Width (HEW) better than 20 arcsec
from 0.5 up to 30 keV and a goal of 40 arcsec at 60 keV. During the phase A,
terminated at the end of 2008, we have developed three engineering models with
two, two and three shells, respectively. The most critical aspects in the
development of the Simbol-X mirrors are i) the production of the 100 mandrels
with very good surface quality within the timeline of the mission; ii) the
replication of shells that must be very thin (a factor of 2 thinner than those
of XMM-Newton) and still have very good image quality up to 80 keV; iii) the
development of an integration process that allows us to integrate these very
thin mirrors maintaining their intrinsic good image quality. The Phase A study
has shown that we can fabricate the mandrels with the needed quality and that
we have developed a valid integration process. The shells that we have produced
so far have a quite good image quality, e.g. HEW <~30 arcsec at 30 keV, and
effective area. However, we still need to make some improvements to reach the
requirements. We will briefly present these results and discuss the possible
improvements that we will investigate during phase B.Comment: 6 pages, 3 figures, invited talk at the conference "2nd International
Simbol-X Symposium", Paris, 2-5 december, 200
Unlocking Human-Robot Dynamics: Introducing SenseCobot, a Novel Multimodal Dataset on Industry 4.0
- …