New approaches to the measurement of chlorophyll, related pigments and productivity in the sea

In the 1984 SBIR Call for Proposals, NASA solicited new methods to measure primary production and chlorophyll in the ocean. Biospherical Instruments Inc. responded to this call with a proposal first to study a variety of approaches to this problem. A second phase of research was then funded to pursue instrumentation to measure the sunlight stimulated naturally occurring fluorescence of chlorophyll in marine phytoplankton. The monitoring of global productivity, global fisheries resources, application of above surface-to-underwater optical communications systems, submarine detection applications, correlation, and calibration of remote sensing systems are but some of the reasons for developing inexpensive sensors to measure chlorophyll and productivity. Normally, productivity measurements are manpower and cost intensive and, with the exception of a very few expensive multiship research experiments, provide no contemporaneous data. We feel that the patented, simple sensors that we have designed will provide a cost effective method for large scale, synoptic, optical measurements in the ocean. This document is the final project report for a NASA sponsored SBIR Phase 2 effort to develop new methods for the measurements of primary production in the ocean. This project has been successfully completed, a U.S. patent was issued covering the methodology and sensors, and the first production run of instrumentation developed under this contract has sold out and been delivered

Shuttle GPS R/PA evaluation analysis and performance tradeoff study

Primary responsibility was understanding and analyzing the various GPS receiver functions as they relate to the shuttle environment. These receiver functions included acquisition properties of the sequential detector, acquisition and tracking properties of the various receiver phase locked loops, and the techniques of sequential receiver operation. In addition to these areas, support was provided in the areas of oscillator stability requirements, antenna management, and navigation filter requirements, including preposition aiding

Synthesis of hetero-bifunctional, end-capped oligo-EDOT derivatives

Conjugated oligomers of 3,4-ethylenedioxythiophene (EDOT) are attractive materials for tissue engineering applications, and as model systems for studying the properties of the widely used polymer PEDOT. We report here the facile synthesis of a series of keto-acid end-capped oligo-EDOT derivatives (n = 2-7) through a combination of a glyoxylation end capping strategy and iterative direct arylation chain extension. Importantly, these structures not only represent the longest oligo-EDOTs reported, but are also bench stable in contrast to previous reports on such oligomers. The constructs reported here can undergo subsequent derivatization for integration into higher order architectures, such as those required for tissue engineering applications. The synthesis of hetero-bifunctional constructs, as well as those containing mixed monomer units is also reported, allowing further complexity to be installed in a controlled manner. Finally, we describe the optical and electrochemical properties of these oligomers and demonstrate the importance of the keto-acid in determining their characteristics

Properties of the mechanosensitive channel MscS pore revealed by tryptophan scanning mutagenesis

Funding This work was supported by a Wellcome Trust Programme grant [092552/A/10/Z awarded to I.R.B., S.M., J. H. Naismith (University of St Andrews, St Andrews, U.K.), and S. J. Conway (University of Oxford, Oxford, U.K.)] (T.R. and M.D.E.), by a BBSRC grant (A.R.) [BB/H017917/1 awarded to I.R.B., J. H. Naismith, and O. Schiemann (University of St Andrews)], by a Leverhulme Emeritus Fellowship (EM-2012-060\2), and by a CEMI grant to I.R.B. from the California Institute of Technology. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013 FP7/2007-2011) under Grant PITN-GA-2011-289384 (FP7-PEOPLE-2011-ITN NICHE) (H.G.) (awarded to S.M.).Peer reviewedPublisher PD

SPS phase control system performance via analytical simulation

A solar power satellite transmission system which incorporates automatic beam forming, steering, and phase control is discussed. The phase control concept centers around the notation of an active retrodirective phased array as a means of pointing the beam to the appropriate spot on Earth. The transmitting antenna (spacetenna) directs the high power beam so that it focuses on the ground-based receiving antenna (rectenna). A combination of analysis and computerized simulation was conducted to determine the far field performance of the reference distribution system, and the beam forming and microwave power generating systems

Probing 5f-state configurations in URu2Si2 with U L3-edge resonant x-ray emission spectroscopy

Resonant x-ray emission spectroscopy (RXES) was employed at the U L3 absorption edge and the La1 emission line to explore the 5f occupancy, nf, and the degree of 5f orbital delocalization in the hidden order compound URu2Si2. By comparing to suitable reference materials such as UF4, UCd11, and alpha-U, we conclude that the 5f orbital in URu2Si2 is at least partially delocalized with nf = 2.87 +/- 0.08, and does not change with temperature down to 10 K within the estimated error. These results place further constraints on theoretical explanations of the hidden order, especially those requiring a localized f2 ground state.Comment: 11 pages,7 figure

Influence of the Hydric Environment on Water Exchange and Hatchlings of Rigid-Shelled Turtle Eggs

To examine the possible influence of incubation substrate water potential on rigid-shelled chelonian eggs and hatchlings, rigid-shelled eggs from four clutches of Brisbane River turtle (Emydura signata) were incubated buried in vermiculite at water potentials of approximately -100, -350, and -850 kPa, and patterns of egg mass change and hatchling attributes were examined. All eggs hatched successfully, and there was no apparent effect of water potential on incubation period, fresh hatchling mass, hatchling water content, or hatchling size. Clutch of origin also had no apparent effect on these attributes when initial egg mass was used as a covariate. However, clutch of origin affected initial egg mass, and clutch of origin and incubation water potential influenced the amount of water exchanged between the eggs and their environment during incubation and the amount of residual yolk found in hatchlings. Substrate water potential has little effect on hatchling outcomes other than the proportion of yolk converted to hatchling tissue during incubation in the rigid-shelled eggs of E. signata. It would appear that in general, the substrate water potential during incubation affects the quality of chelonian hatchlings by influencing the amount of yolk converted to hatchling tissue during embryonic development and that this influence is stronger in flexible-shelled eggs than in rigid-shelled eggs

Ytterbium divalency and lattice disorder in near-zero thermal expansion YbGaGe

While near-zero thermal expansion (NZTE) in YbGaGe is sensitive to stoichiometry and defect concentration, the NZTE mechanism remains elusive. We present x-ray absorption spectra that show unequivocally that Yb is nearly divalent in YbGaGe and the valence does not change with temperature or with nominally 1% B or 5% C impurities, ruling out a valence-fluctuation mechanism. Moreover, substantial changes occur in the local structure around Yb with B and C inclusion. Together with inelastic neutron scattering measurements, these data indicate a strong tendency for the lattice to disorder, providing a possible explanation for NZTE in YbGaGe.Comment: 4 pages, 4 figure, supplementary inf

The Hyperfine Splitting in Charmonium: Lattice Computations Using the Wilson and Clover Fermion Actions

We compute the hyperfine splitting $m_{J/\psi}-m_{\eta_c}$ on the lattice, using both the Wilson and $O(a)$-improved (clover) actions for quenched quarks. The computations are performed on a $24^3\times48$ lattice at $\beta = 6.2$, using the same set of 18 gluon configurations for both fermion actions. We find that the splitting is 1.83\err{13}{15} times larger with the clover action than with the Wilson action, demonstrating the sensitivity of the spin-splitting to the magnetic moment term which is present in the clover action. However, even with the clover action the result is less than half of the physical mass-splitting. We also compute the decay constants $f_{\eta_c}$ and $f^{-1}_{J/\psi}$, both of which are considerably larger when computed using the clover action than with the Wilson action. For example for the ratio $f^{-1}_{J/\psi}/f^{-1}_{\rho}$ we find 0.32\err{1}{2} with the Wilson action and $0.48\pm 3$ with the clover action (the physical value is 0.44(2)).Comment: LaTeX file, 8 pages and two postscript figures. Southampton Preprint: SHEP 91/92-27 Edinburgh Preprint: 92/51