Development of glass-stalks-unsaturated polyester hybrid composites

The aim of this study is to investigate the possibility to use agro-residues of the vinification process as a cheaper and eco-friendly fillers to prepare unsaturated polyester composites for interior design building sector. Experimental unsaturated polyester–based resin composite samples, reinforced with grape stalks, were prepared by a simple casting technique. The glass microspheres were added in the mixing to increase the mechanical and physical properties of the final materials. A silane coupling agent was used to increase the interface adhesion between resin and grape stalks. The samples were subjected to several tests. Unfilled samples were analyzed by Differential Scanning calorimetry (DSC). Prepared silanized and non-silanized composites were completely characterized in order to study the effect of stalk fibers concentration on the mechanical, chemical and physical properties. The results showed that mechanical and physical properties for silanized composites were superior to non-silanized composites. The presence of stalks, up to 50% wt. increased Young's Modulus preserving a satisfactory tensile strength and hardness in comparison with the neat resin properties. Then, the final results showed that grape stalks from winemaking can be satisfactory used as natural filler resource to produce composites for interior furniture

A new noninvasive method for the accurate and precise assessment of varicose vein diameters

The feasibility and reproducibility of a new ultrasonic method for the direct assessment of maximal varicose vein diameter (VVD) were evaluated. A study was also performed to demonstrate the capacity of the method to detect changes in venous diameter induced by a pharmacologic treatment. Patients with varicose vein disease were recruited. A method that allows the precise positioning of patient and transducer and performance of scans in a gel-bath was developed. Maximal VVD was recorded both in the standing and supine positions. The intraassay reproducibility was determined by replicate scans made within 15 minutes in both positions. The interobserver variability was assessed by comparing VVDs measured during the first phase baseline examination with those obtained during baseline examinations in the second phase of the study. The error in reproducibility of VVD determinations was 5.3% when diameters were evaluated in the standing position and 6.4% when assessed in the supine position. The intramethod agreement was high, with a bias between readings of 0.06 ±0.18 mm and of –0.02 ±0.19 mm, respectively, in standing and supine positions. Correlation coefficients were better than 0.99 in both positions. The method appears to be sensitive enough to detect small changes in VVDs induced by treatments. The proposed technique provides a tool of potential valid use in the detection and in vivo monitoring of VVD changes in patients with varicose vein disease. The method offers an innovative approach to obtain a quantitative assessment of varicose vein progression and of treatment effects, thus providing a basis for epidemiologic survey

Para uma análise pedagógica dos contextos educativos - uma entrevista com Anna Bondioli, Monica Ferrari e Donatella Savio da Universidade de Pavia/Itália

Tradução: Luiz Ernani Fritoli (UFPR) e Revisão Técnica: Catarina Moro e Gizele de Souza (UFPR)

Measurement of the Charge Collection Efficiency after Heavy Non-Uniform Irradiation in BaBar Silicon Detectors

We have investigated the depletion voltage changes, the leakage current increase and the charge collection efficiency of a silicon microstrip detector identical to those used in the inner layers of the BaBar Silicon Vertex Tracker (SVT) after heavy non-uniform irradiation. A full SVT module with the front-end electronics connected has been irradiated with a 0.9 GeV electron beam up to a peak fluence of 3.5 x 10^14 e^-/cm^2, well beyond the level causing substrate type inversion. We irradiated one of the two sensors composing the module with a non-uniform profile with sigma=1.4 mm that simulates the conditions encountered in the BaBar experiment by the modules intersecting the horizontal machine plane. The position dependence of the charge collection properties and the depletion voltage have been investigated in detail using a 1060 nm LED and an innovative measuring technique based only on the digital output of the chip.Comment: 7 pages, 13 figures. Presented at the 2004 IEEE Nuclear Science Symposium, October 18-21, Rome, Italy. Accepted for publication by IEEE Transactions on Nuclear Scienc

Stratigraphic context and paleoenvironmental significance of minor taxa (Pisces, Reptilia, Aves, Rodentia) from the late Early Pleistocene palaeoanthropological site of Buia (Eritrea)

none13noneL. Rook; M. Ghinassi; G. Carnevale; M. Delfino; M. Pavia; L. Bondioli ; F. Candilio; A. Coppa; B. Martínez-Navarro; T. Medin; M. Papini; C. Zanolli; Y. LibsekalL., Rook; Ghinassi, Massimiliano; G., Carnevale; M., Delfino; M., Pavia; L., Bondioli; F., Candilio; A., Coppa; B., Martínez Navarro; T., Medin; M., Papini; C., Zanolli; Y., Libseka

High-accuracy methodology for the integrative restoration of archaeological teeth by using reverse engineering techniques and rapid prototyping

The reconstruction of the original morphology of bones and teeth after sampling for physicochemical (e.g., radiocarbon and uranium series dating, stable isotope analysis, paleohistology, trace element analysis) and biomolecular analyses (e.g., ancient DNA, paleoproteomics) is appropriate in many contexts and compulsory when dealing with fossil human remains. The reconstruction protocols available to date are mostly based on manual re-integration of removed portions and can lead to an imprecise recovery of the original morphology. In this work, to restore the original external morphology of sampled teeth we used computed microtomography (microCT), reverse engineering (RE), computer-aided design (CAD) and rapid prototyping (RP) techniques to fabricate customized missing parts. The protocol was tested by performing the reconstruction of two Upper Palaeolithic human teeth from the archaeological excavations of Roccia San Sebastiano (Mondragone, Caserta, southern Italy) and Riparo I of Grotte Verdi di Pradis (Clauzetto, Pordenone, north-eastern Italy) (RSS2 and Pradis 1, respectively), which were sampled for physicochemical and biomolecular analyses. It involved a composite procedure consisting in: a) the microCT scanning of the original specimens; b) sampling; c) the microCT scanning of the specimens after sampling; d) the reconstruction of the digital 3D surfaces of the specimens before and after sampling; e) the creation of digital models of the missing/sampled portions by subtracting the 3D images of the preserved portions (after the sampling) from the images of the intact specimens (before the sampling) by using reverse engineering techniques; f) the prototyping of the missing/sampled portions to be integrated; g) the painting and application of the prototypes through the use of compatible and reversible adhesives. By following the proposed protocol, in addition to the fabrication of a physical element which is faithful to the original, it was possible to obtain a remarkable correspondence between the contact surfaces of the two portions (the original and the reconstructed one) without having to resort to any manipulation/adaptation of either element

The origin and legacy of the Etruscans through a 2000-year archeogenomic time transect

The origin, development, and legacy of the enigmatic Etruscan civilization from the central region of the Italian peninsula known as Etruria have been debated for centuries. Here we report a genomic time transect of 82 individuals spanning almost two millennia (800 BCE to 1000 CE) across Etruria and southern Italy. During the Iron Age, we detect a component of Indo-European–associated steppe ancestry and the lack of recent Anatolian-related admixture among the putative non–Indo-European–speaking Etruscans. Despite comprising diverse individuals of central European, northern African, and Near Eastern ancestry, the local gene pool is largely maintained across the first millennium BCE. This drastically changes during the Roman Imperial period where we report an abrupt population-wide shift to ~50% admixture with eastern Mediterranean ancestry. Last, we identify northern European components appearing in central Italy during the Early Middle Ages, which thus formed the genetic landscape of present-day Italian populations

Measurement of Branching Fractions and Rate Asymmetries in the Rare Decays B -> K(*) l+ l-

In a sample of 471 million BB events collected with the BABAR detector at the PEP-II e+e- collider we study the rare decays B -> K(*) l+ l-, where l+ l- is either e+e- or mu+mu-. We report results on partial branching fractions and isospin asymmetries in seven bins of di-lepton mass-squared. We further present CP and lepton-flavor asymmetries for di-lepton masses below and above the J/psi resonance. We find no evidence for CP or lepton-flavor violation. The partial branching fractions and isospin asymmetries are consistent with the Standard Model predictions and with results from other experiments.Comment: 16 pages, 14 figures, accepted by Phys. Rev.

Evidence for the η_b(1S) Meson in Radiative Υ(2S) Decay

We have performed a search for the η_b(1S) meson in the radiative decay of the Υ(2S) resonance using a sample of 91.6 × 10^6 Υ(2S) events recorded with the BABAR detector at the PEP-II B factory at the SLAC National Accelerator Laboratory. We observe a peak in the photon energy spectrum at E_γ = 609.3^(+4.6)_(-4.5)(stat)±1.9(syst) MeV, corresponding to an η_b(1S) mass of 9394.2^(+4.8)_(-4.9)(stat) ± 2.0(syst) MeV/c^2. The branching fraction for the decay Υ(2S) → γη_b(1S) is determined to be [3.9 ± 1.1(stat)^(+1.1)_(-0.9)(syst)] × 10^(-4). We find the ratio of branching fractions B[Υ(2S) → γη_b(1S)]/B[Υ(3S) → γη_b(1S)]= 0.82 ± 0.24(stat)^(+0.20)_(-0.19)(syst)