COMPULSORY LICENSING PRICE CONTROLS AND ACCESS TO PATENTED FOREIGN PRODUCTS

www.vanderbilt.edu/econ Compulsory licensing, price controls, and access to patented foreign product

Detection of Coronal Mass Ejections in V471 Tauri with the Hubble Space Telescope

V471 Tauri, an eclipsing system consisting of a hot DA white dwarf (WD) and a dK2 companion in a 12.5-hour orbit, is the prototype of the pre-cataclysmic binaries. The late-type component is magnetically active, due to its being constrained to rotate synchronously with the short orbital period. During a program of UV spectroscopy of V471 Tau, carried out with the Goddard High Resolution Spectrograph (GHRS) onboard the Hubble Space Telescope, we serendipitously detected two episodes in which transient absorptions in the Si III 1206 A resonance line appeared suddenly, on a timescale of <2 min. The observations were taken in a narrow spectral region around Ly-alpha, and were all obtained near the two quadratures of the binary orbit, i.e., at maximum projected separation (~3.3 Rsun) of the WD and K star. We suggest that these transient features arise when coronal mass ejections (CME's) from the K2 dwarf pass across the line of sight to the WD. Estimates of the velocities, densities, and masses of the events in V471 Tau are generally consistent with the properties of solar CME's. Given our detection of 2 events during 6.8 hr of GHRS observing, along with a consideration of the restricted range of latitudes and longitudes on the K star's surface that can give rise to trajectories passing in front of the WD as seen from Earth, we estimate that the active V471 Tau dK star emits some 100-500 CME's per day, as compared to 1-3 per day for the Sun. The K dwarf's mass-loss rate associated with CME's is at least (5-25) x 10^{-14} Msun/yr, but it may well be orders of magnitude higher if most of the silicon is in ionization states other than Si III.Comment: 24 pages AASTeX, 4 figures. Accepted by Astrophysical Journa

Axial segregation behaviour of a reacting biomass particle in fluidized bed reactors: experimental results and model validation

Axial segregation behaviour of a single biomass particle in a lab-scale bubbling fluidized bed has been investigated from both experimental and modelling perspectives. Experiments were conducted using beech wood particles of different sizes, ranging from 8 to 12 mm under either oxidizing or inert conditions. The fluidized bed reactor was operated at temperatures and fluidization velocity ratios, U/Umf, in the range of 500–650 °C and 1–2, respectively. A one-dimensional model has been developed to predict the axial location of the particle over time, taking into account both dynamic and thermal conversion mechanisms. X-ray imaging techniques allowed to identify endogenous bubbles released during devolatilization and carry out direct measurements of their size. This information was used to propose an expression for the lift force acting on the fuel particle. The model showed very accurate predictions and the segregation behaviour of the fuel particle appeared to be independent of the nature of the fluidizing medium

Achieving Stable Nitritation for Mainstream Deammonification by Combining Free Nitrous Acid-Based Sludge Treatment and Oxygen Limitation.

Stable nitritation is a critical bottleneck for achieving autotrophic nitrogen removal using the energy-saving mainstream deammonification process. Herein we report a new strategy to wash out both the Nitrospira sp. and Nitrobacter sp. from the treatment of domestic-strength wastewater. The strategy combines sludge treatment using free nitrous acid (FNA) with dissolved oxygen (DO) control in the nitritation reactor. Initially, the nitrifying reactor achieved full conversion of NH4(+) to NO3(-). Then, nitrite accumulation at ~60% was achieved in the reactor when 1/4 of the sludge was treated daily with FNA at 1.82 mg N/L in a side-stream unit for 24 h. Fluorescence in-situ hybridization (FISH) revealed FNA treatment substantially reduced the abundance of nitrite oxidizing bacteria (NOB) (from 23.0 ± 4.3 to 5.3 ± 1.9%), especially that of Nitrospira sp. (from 15.7 ± 3.9 to 0.4 ± 0.1%). Nitrite accumulation increased to ~80% when the DO concentration in the mainstream reactor was reduced from 2.5-3.0 to 0.3-0.8 mg/L. FISH revealed the DO limitation further reduced the abundance of NOB (to 2.1 ± 1.0%), especially that of Nitrobacter sp. (from 4.9 ± 1.2 to 1.8 ± 0.8%). The strategy developed removes a major barrier for deammonification in low-strength domestic wastewater

Decay of metastable phases in a model for the catalytic oxidation of CO

We study by kinetic Monte Carlo simulations the dynamic behavior of a Ziff-Gulari-Barshad model with CO desorption for the reaction CO + O $\to$ CO$_2$ on a catalytic surface. Finite-size scaling analysis of the fluctuations and the fourth-order order-parameter cumulant show that below a critical CO desorption rate, the model exhibits a nonequilibrium first-order phase transition between low and high CO coverage phases. We calculate several points on the coexistence curve. We also measure the metastable lifetimes associated with the transition from the low CO coverage phase to the high CO coverage phase, and {\it vice versa}. Our results indicate that the transition process follows a mechanism very similar to the decay of metastable phases associated with {\it equilibrium} first-order phase transitions and can be described by the classic Kolmogorov-Johnson-Mehl-Avrami theory of phase transformation by nucleation and growth. In the present case, the desorption parameter plays the role of temperature, and the distance to the coexistence curve plays the role of an external field or supersaturation. We identify two distinct regimes, depending on whether the system is far from or close to the coexistence curve, in which the statistical properties and the system-size dependence of the lifetimes are different, corresponding to multidroplet or single-droplet decay, respectively. The crossover between the two regimes approaches the coexistence curve logarithmically with system size, analogous to the behavior of the crossover between multidroplet and single-droplet metastable decay near an equilibrium first-order phase transition.Comment: 27 pages, 22 figures, accepted by Physical Review

Monitoring based on time-frequency tracking of estimated harmonic series and modulation sidebands

International audienceThe installation of a Condition Monitoring System (CMS) on a mechanical machine (e.g., on a wind turbine) aims to reduce the operating costs by applying a predictive maintenance strategy. The CMS is composed of sensors acquiring signals from which system health indicators are computed and monitored. Part of those indicators are predefined depending on the monitored system kinematic and are computed by averaging large or narrow spectral bands. The averaging and the need for predefined thresholds for default detection may induce lots of false alarms while reducing the ability to detect the default early. To get precise health indicators reflecting each local meaningful spectral content, the AStrion software proposes a new data-driven monitoring strategy without any a priori on the measured signals. First, an automatic spectral analysis is applied to detect, characterize and classify the different spectral structures of the successive measured signals. These spectral structures can be either single spectral peaks, either peaks grouped in harmonic series or in modulation sidebands [1]. Second, these spectral structures are characterized by several features, including for example the number of peaks, the characteristic frequencies and the energy. This gives a snapshot of the system health at the signal acquisition time. To perform an automatic diagnosis of the system, the spectral evolution should be tracked along the time snapshots. In this paper, we propose a time tracking method based on McAulay & Quatieri algorithm [2] which has been designed originally for speech signals acquired on a continuous temporal basis. We have adapted [2] in order to account not only for single spectral peak evolution but also for the evolution of more complex structures such as harmonic series or modulation sidebands, even in the case of signals acquired on a non-regular temporal basis, as it is often the case. Moreover, an added sleep state makes the proposed method robust against nondetected spectral structures at a given time. Finally, the temporal evolution of the spectral structure features can be monitored and used as precise health indicators. The following figure is a result of the proposed method applied on real signals coming from a test bench designed in KAStrion project for simulating a wind turbine operation and for which the inner race of the main bearing has been damaged. Above, the time frequency map displays a zoom of the spectral peaks detected (around 20.000 per snapshot, represented by circles) and shows in blue the tracking from 44 to 189 operating hours of a spectral peak at 3.45 Hz. This particular peak evolves at 129 hours to become an harmonic series with more and more peaks and energy. Its energy evolution (plotted below) shows an increase which mirrors out a failure. In a following step [3], this spectral structure has been associated with the ball pass frequency of the inner ring of the main bearing. A dismantling of this bearing has confirmed the failure. This result shows the potential of the proposed data-driven method to create automatically relevant health indicators

The conceptual and practical ethical dilemmas of using health discussion board posts as research data.

Increasing numbers of people living with a long-term health condition are putting personal health information online, including on discussion boards. Many discussion boards contain material of potential use to researchers; however, it is unclear how this information can and should be used by researchers. To date there has been no evaluation of the views of those individuals sharing health information online regarding the use of their shared information for research purposes

High resolution CMB power spectrum from the complete ACBAR data set

In this paper, we present results from the complete set of cosmic microwave background (CMB) radiation temperature anisotropy observations made with the Arcminute Cosmology Bolometer Array Receiver (ACBAR) operating at 150 GHz. We include new data from the final 2005 observing season, expanding the number of detector-hours by 210% and the sky coverage by 490% over that used for the previous ACBAR release. As a result, the band-power uncertainties have been reduced by more than a factor of two on angular scales encompassing the third to fifth acoustic peaks as well as the damping tail of the CMB power spectrum. The calibration uncertainty has been reduced from 6% to 2.1% in temperature through a direct comparison of the CMB anisotropy measured by ACBAR with that of the dipole-calibrated WMAP5 experiment. The measured power spectrum is consistent with a spatially flat, LambdaCDM cosmological model. We include the effects of weak lensing in the power spectrum model computations and find that this significantly improves the fits of the models to the combined ACBAR+WMAP5 power spectrum. The preferred strength of the lensing is consistent with theoretical expectations. On fine angular scales, there is weak evidence (1.1 sigma) for excess power above the level expected from primary anisotropies. We expect any excess power to be dominated by the combination of emission from dusty protogalaxies and the Sunyaev-Zel'dovich effect (SZE). However, the excess observed by ACBAR is significantly smaller than the excess power at ell > 2000 reported by the CBI experiment operating at 30 GHz. Therefore, while it is unlikely that the CBI excess has a primordial origin; the combined ACBAR and CBI results are consistent with the source of the CBI excess being either the SZE or radio source contamination.Comment: Submitted to ApJ; Changed to apply a WMAP5-based calibration. The cosmological parameter estimation has been updated to include WMAP