1,296 research outputs found
An algorithm for calculating the Lorentz angle in silicon detectors
Future experiments will use silicon sensors in the harsh radiation
environment of the LHC (Large Hadron Collider) and high magnetic fields. The
drift direction of the charge carriers is affected by the Lorentz force due to
the high magnetic field. Also the resulting radiation damage changes the
properties of the drift.
In this paper measurements of the Lorentz angle of electrons and holes before
and after irradiation are reviewed and compared with a simple algorithm to
compute the Lorentz angle.Comment: 13 pages, 7 figures, final version accepted by NIMA. Mainly
clarifications included and slightly shortene
Plasma flow in an argon cascade arc
A model is described for the plasma flow in an Ar cascade arc which takes into account the heating and pressure effects. As the pressure increases the elec. field increases and the arc temp. decreases. The results agree with exptl. detns. [on SciFinder (R)
Lorentz angle measurements in irradiated silicon detectors between 77 K and 300 K
Future experiments are using silicon detectors in a high radiation
environment and in high magnetic fields. The radiation tolerance of silicon
improves by cooling it to temperatures below 180 K. At low temperatures the
mobility increases, which leads to larger deflections of the charge carriers by
the Lorentz force. A good knowledge of the Lorentz angle is needed for design
and operation of silicon detectors. We present measurements of the Lorentz
angle between 77 K and 300 K before and after irradiation with a primary beam
of 21 MeV protons.Comment: 13 pages, 9 figures, submitted to ICHEP2000, Osaka, Japa
On Rank Problems for Planar Webs and Projective Structures
We present old and recent results on rank problems and linearizability of
geodesic planar webs.Comment: 31 pages; LaTeX; corrected the abstract and Introduction; added
reference
Iron isotope fractionation in soil and graminaceous crops after 100âyears of liming in the longâterm agricultural experimental site at BerlinâDahlem, Germany
Sustainable arable cropping relies on repeated liming. Yet, the associated increase in soil pH can reduce the availability of iron (Fe) to plants. We hypothesized that repeated liming, but not pedogenic processes such as lessivage (i.e., translocation of clay particles), alters the Fe cycle in Luvisol soil, thereby affecting Fe isotope composition in soils and crops. Hence, we analysed Fe concentrations and isotope compositions in soil profiles and winter rye from the long-term agricultural experimental site in Berlin-Dahlem, Germany, where a controlled liming trial with three field replicates per treatment has been conducted on Albic Luvisols since 1923. Heterogeneity in subsoil was observed at this site for Fe concentration but not for Fe isotope composition. Lessivage had not affected Fe isotope composition in the soil profiles. The results also showed that almost 100âyears of liming lowered the concentration of the HCl-extractable Fe that was potentially available for plant uptake in the surface soil (0â15âcm) from 1.03 (standard error (SE) 0.03) to 0.94 (SE 0.01) gâkgâ1. This HCl-extractable Fe pool contained isotopically lighter Fe (δ56Fe = â0.05 to â0.29â°) than the bulk soil (δ56Fe = â0.08 to 0.08â°). However, its Fe isotope composition was not altered by the long-term lime application. Liming resulted in relatively lower Fe concentrations in the roots of winter rye. In addition, liming led to a heavier Fe isotope composition of the whole plants compared with those grown in the non-limed plots (δ56FeWholePlant_â+âLime = â0.12â°, SE 0.03 vs. δ56FeWholePlant_-Lime = â0.21â°, SE 0.01). This suggests that the elevated soil pH (increased by one unit due to liming) promoted the Fe uptake strategy through complexation of Fe(III) from the rhizosphere, which favoured heavier Fe isotopes. Overall, the present study showed that liming and a related increase in pH did not affect the Fe isotope compositions of the soil, but may influence the Fe isotope composition of plants grown in the soil if they alter their Fe uptake strategy upon the change of Fe availability.Bundesministerium fĂźr Bildung und Forschung
http://dx.doi.org/10.13039/50110000234
Role of Nanoclays in Carbon stabilization in Andisols and Cambisols
Greenhouse gas (GHG) emissions and their consequent effect on global warming are an issue of global environmental concern. Increased carbon (C) stabilization and sequestration in soil organic matter (SOM) is one of the ways to mitigate these emissions. Here we evaluated the role of nanoclays isolated from soil on C stabilization in both a C rich Andisols and C depleted Cambisols. Nanoclays were analyzed for size and morphology by transmission electron microscopy, for elemental composition and molecular composition using pyrolysis-GC/MS. Moreover, nanoclays were treated with H2O2 to isolate stable SOM associated with them. Our result showed better nanoclay extraction efficiency and higher nanoclay yield for Cambisol compared to Andisols, probably related to their low organic matter content. Nanoclay fractions from both soils were different in size, morphology, surface reactivity and SOM content. Nanoclays in Andisols sequester around 5-times more C than Cambisols, and stabilized 6 to 8-times more C than Cambisols nanoclay after SOM chemical oxidation. Isoelectric points and surface charge of nanoclays extracted from the two soils was very different. However, the chemical reactivity of the nanoclay SOM was similar, illustrating their importance for C sequestration. Generally, the precise C stabilization mechanisms of both soils may be different, with nanoscale aggregation being more important in Andisols. We can conclude that independent of the soil type and mineralogy the nanoclay fraction may play an important role in C sequestration and stabilization in soil-plant systems
Interaction of straw amendment and soil NO3- content controls fungal denitrification and denitrification product stoichiometry in a sandy soil
The return of agricultural crop residues are vital to maintain or even enhance soil fertility. However, the influence of application rate of crop residues on denitrification and its related gaseous N emissions is not fully understood. We conducted a fully robotized continuous flow incubation experiment using a Helium/Oxygen atmosphere over 30 days to examine the effect of maize straw application rate on: i) the rate of denitrification, ii) denitrification product stoichiometry N2O/(N2O+N2), and iii) the contribution of fungal denitrification to N2O fluxes. Five treatments were established using sieved, repacked sandy textured soil; i) non-amended control, ii) nitrate only, iii) low rate of straw + nitrate, iv) medium rate of straw + nitrate, and iv) high rate of straw + nitrate (n = 3). We simultaneously measured NO, N2O as well as direct N2 emissions and used the N2O 15N site preference signatures of soil-emitted N2O to distinguish N2O production from fungal and bacterial denitrification. Uniquely, soil NO3â measurements were also made throughout the incubation. Emissions of N2O during the initial phase of the experiment (0â13 days) increased almost linearly with increasing rate of straw incorporation and with (almost) no N2 production. However, the rate of straw amendment was negatively correlated with N2O, but positively correlated with N2 fluxes later in the experimental period (13â30 days). Soil NO3â content, in all treatments, was identified as the main factor responsible for the shift from N2O production to N2O reduction. Straw amendment immediately lowered the proportion of N2O from bacterial denitrification, thus implying that more of the N2O emitted was derived from fungi (18âŻÂąâŻ0.7% in control and up to 40âŻÂąâŻ3.0% in high straw treatments during the first 13 days). However, after day 15 when soil NO3â content decreased to <40âŻmg NO3â-N kgâ1 soil, the N2O 15N site preference values of the N2O produced in the medium straw rate treatment showed a sharp declining trend 15 days after onset of experiment thereby indicating a clear shift towards a more dominant bacterial source of N2O. Our study singularly highlights the complex interrelationship between soil NO3â kinetics, crop residue incorporation, fungal denitrification and N2O/(N2O + N2) ratio. Overall we found that the effect of crop residue applications on soil N2O and N2 emissions depends mainly on soil NO3â content, as NO3â was the primary regulator of the N2O/(N2O + N2) product ratio of denitrification. Furthermore, the application of straw residue enhanced fungal denitrification, but only when the soil NO3â content was sufficient to supply enough electron acceptors to the denitrifiers
Unexpected Carbon-Carbon Coupling between Organic Cyanides and an Isopropyl β-Carbon in a Hafnium Ene Diamide Complex
A reaction sequence involving two hydrogen transfers and a C-C coupling on the β-carbon of an isopropyl group leads to formation of a new dianionic tridentate ligand in the reaction of the ene diamide complex Cp*Hf(Ď2,Ď-iPr-DAB)Cl (1; Cp* = Ρ5-C5Me5, iPr-DAB = 1,4-diisopropyl-1,4-diaza-1,3-butadiene) with organic cyanides. The product Cp*Hf [iPrNCH=CHNC(Me)=CHC(tBu)=NH]Cl was structurally characterized (Pbca, a = 13.454 (1) Ă
, b = 11.470 (1) Ă
, c = 31.297 (2) Ă
, 100 K). The reaction sequence is probably initiated by the transfer of the iPr Îą-H atom to a coordinated cyanide. Such a hydrogen transfer was observed in the reaction of 1 with ketones, producing the ene imine alkoxide complexes Cp*Hf[iPrNCH=CHN=CMe2](OCHR2)Cl, which were identified by NMR spectroscopy
- âŚ