741 research outputs found
The IST Cluster: an integrated infrastructure for parallel applications in Physics and Engineering
WOS:000283531600008 (NÂș de Acesso Web of Science)The infrastructure to support advanced computing applications at Instituto Superior TÂŽecnico is presented, including a detailed description of the hardware, system software, and benchmarks, which show an HPL performance of 1.6 Tflops. Due to its decentralized administrative basis, a discussion of the usage policy and administration is also given. The in-house codes running in production are also presented
The Wigner function associated to the Rogers-Szego polynomials
We show here that besides the well known Hermite polynomials, the q-deformed
harmonic oscillator algebra admits another function space associated to a
particular family of q-polynomials, namely the Rogers-Szego polynomials. Their
main properties are presented, the associated Wigner function is calculated and
its properties are discussed. It is shown that the angle probability density
obtained from the Wigner function is a well-behaved function defined in the
interval [-Pi,Pi), while the action probability only assumes integer values
greater or equal than zero. It is emphasized the fact that the width of the
angle probability density is governed by the free parameter q characterizing
the polynomial.Comment: 12 pages, 2 (mathemathica) figure
Tomographic analysis of reflectometry data II: the phase derivative
A tomographic technique has been used in the past to decompose complex
signals in its components. The technique is based on spectral decomposition and
projection on the eigenvectors of a family of unitary operators. Here this
technique is also shown to be appropriate to obtain the instantaneous phase
derivative of the signal components. The method is illustrated on simulated
data and on data obtained from plasma reflectometry experiments in the Tore
Supra.Comment: 25 pages, Latex, 17 figure
Wigner function for twisted photons
A comprehensive theory of the Weyl-Wigner formalism for the canonical pair
angle-angular momentum is presented, with special emphasis in the implications
of rotational periodicity and angular-momentum discreteness.Comment: 6 pages, 4 figure
Quantum Tunneling in the Wigner Representation
Time dependence for barrier penetration is considered in the phase space. An
asymptotic phase-space propagator for nonrelativistic scattering on a one -
dimensional barrier is constructed. The propagator has a form universal for
various initial state preparations and local potential barriers. It is
manifestly causal and includes time-lag effects and quantum spreading. Specific
features of quantum dynamics which disappear in the standard semi-classical
approximation are revealed. The propagator may be applied to calculation of the
final momentum and coordinate distributions, for particles transmitted through
or reflected from the potential barrier, as well as for elucidating the
tunneling time problem.Comment: 18 pages, LATEX, no figure
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with nââ=ââ2 RMP maintaining good confinement HH(98,y2)â0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.Peer reviewe
Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET
Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate
Modelling of hybrid scenario: from present-day experiments towards ITER
The âhybridâ scenario is an attractive operating scenario for ITER since it combines long plasma duration with the reliability of the reference H-mode regime. We review the recent European modelling effort carried out within the Integrated Scenario Modelling group which aims at (i) understanding the underlying physics of the hybrid regime in ASDEX-Upgrade and JET and (ii) extrapolating them towards ITER. JET and ASDEX-Upgrade hybrid scenarios performed under different experimental conditions have been simulated in an interpretative and predictive way in order to address the current profile dynamics and its link with core confinement, the relative importance of magnetic shear, s , and E Ă B flow shear on the core turbulence, pedestal stability and HâL transition. The correlation of the improved confinement with an increased s / q at outer radii observed in JET and ASDEX-Upgrade discharges is consistent with the predictions based on the GLF23 model applied in the simulations of the ion and electron kinetic profiles. Projections to ITER hybrid scenarios have been carried out focusing on optimization of the heating/current drive schemes to reach and ultimately control the desired plasma equilibrium using ITER actuators. Firstly, access condition to the hybrid-like q -profiles during the current rampâup phase has been investigated. Secondly, from the interpreted role of the s / q ratio, ITER hybrid scenario flat-top performance has been optimized through tailoring the q -profile shape and pedestal conditions. EPED predictions of pedestal pressure and width have been used as constraints in the interpretative modelling while the core heat transport is predicted by GLF23. Finally, model-based approach for real-time control of advanced tokamak scenarios has been applied to ITER hybrid regime for simultaneous magnetic and kinetic profile control.</p
Tritium distributions on W-coated divertor tiles used in the third JET ITER-like wall campaign
Tritium (T) distributions on tungsten (W)-coated plasma-facing tiles used in the third ITER-like wall campaign (2015â2016) of the Joint European Torus (JET) were examined by means of an imaging plate technique and ÎČ-ray induced x-ray spectrometry, and they were compared with the distributions after the second (2013â2014) campaign. Strong enrichment of T in beryllium (Be) deposition layers was observed after the second campaign. In contrast, T distributions after the third campaign was more uniform though Be deposition layers were visually recognized. The one of the possible explanations is enhanced desorption of T from Be deposition layers due to higher tile temperatures caused by higher energy input in the third campaign
- âŠ