The Growth And Development Of Education In Watauga County

The purpose of this study is to give the history of the development of education in Watauga County, North Carolina, from the beginning of education in the county to 1950. An attempt is also made to compare the development of education in Watauga County with the state as a whole, and to offer practical suggestions for improving and developing the school system

From acrylates to silicones: A review of common optical fibre coatings used for normal to harsh environments.

The full realisation of optical fibres in devices such as sensors is reliant on the stability of their polymer coating under in-service conditions. Depending on the application, resistance to several environmental factors may be required, such as high or low humidity level, temperature, pressure, or exposure to aggressive solids, liquids or gases. Changes in mechanical or chemical properties as a result of harsh environments can lead to stresses in the coating and subsequent deterioration of the physical or optical properties of the optical fibre. A variety of coating materials are available on the global market, offering optical fibre manufacturers a plethora of options. This review provides a comparison among four most utilised, commercially available types of coating material: conventional and specialty acrylates, polyimides and silicones. It details the history of their development, reported physiochemical properties and some of their main limitations in the context of optical fibre coating applications

Theoretical description of deformed proton emitters: nonadiabatic coupled-channel method

The newly developed nonadiabatic method based on the coupled-channel Schroedinger equation with Gamow states is used to study the phenomenon of proton radioactivity. The new method, adopting the weak coupling regime of the particle-plus-rotor model, allows for the inclusion of excitations in the daughter nucleus. This can lead to rather different predictions for lifetimes and branching ratios as compared to the standard adiabatic approximation corresponding to the strong coupling scheme. Calculations are performed for several experimentally seen, non-spherical nuclei beyond the proton dripline. By comparing theory and experiment, we are able to characterize the angular momentum content of the observed narrow resonance.Comment: 12 pages including 10 figure

2010 Rheumatoid arthritis classification criteria: An American College of Rheumatology/European League Against Rheumatism collaborative initiative

Objective The 1987 American College of Rheumatology (ACR; formerly, the American Rheumatism Association) classification criteria for rheumatoid arthritis (RA) have been criticized for their lack of sensitivity in early disease. This work was undertaken to develop new classification criteria for RA. Methods A joint working group from the ACR and the European League Against Rheumatism developed, in 3 phases, a new approach to classifying RA. The work focused on identifying, among patients newly presenting with undifferentiated inflammatory synovitis, factors that best discriminated between those who were and those who were not at high risk for persistent and/or erosive disease—this being the appropriate current paradigm underlying the disease construct “rheumatoid arthritis.” Results In the new criteria set, classification as “definite RA” is based on the confirmed presence of synovitis in at least 1 joint, absence of an alternative diagnosis that better explains the synovitis, and achievement of a total score of 6 or greater (of a possible 10) from the individual scores in 4 domains: number and site of involved joints (score range 0–5), serologic abnormality (score range 0–3), elevated acute-phase response (score range 0–1), and symptom duration (2 levels; range 0–1). Conclusion This new classification system redefines the current paradigm of RA by focusing on features at earlier stages of disease that are associated with persistent and/or erosive disease, rather than defining the disease by its late-stage features. This will refocus attention on the important need for earlier diagnosis and institution of effective disease-suppressing therapy to prevent or minimize the occurrence of the undesirable sequelae that currently comprise the paradigm underlying the disease construct “rheumatoid arthritis.”Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/78045/1/27584_ftp.pd

The 2010 American College of Rheumatology/European League Against Rheumatism classification criteria for rheumatoid arthritis: Phase 2 methodological report

Objective The American College of Rheumatology and the European League Against Rheumatism have developed new classification criteria for rheumatoid arthritis (RA). The aim of Phase 2 of the development process was to achieve expert consensus on the clinical and laboratory variables that should contribute to the final criteria set. Methods Twenty-four expert RA clinicians (12 from Europe and 12 from North America) participated in Phase 2. A consensus-based decision analysis approach was used to identify factors (and their relative weights) that influence the probability of “developing RA,” complemented by data from the Phase 1 study. Patient case scenarios were used to identify and reach consensus on factors important in determining the probability of RA development. Decision analytic software was used to derive the relative weights for each of the factors and their categories, using choice-based conjoint analysis. Results The expert panel agreed that the new classification criteria should be applied to individuals with undifferentiated inflammatory arthritis in whom at least 1 joint is deemed by an expert assessor to be swollen, indicating definite synovitis. In this clinical setting, they identified 4 additional criteria as being important: number of joints involved and site of involvement, serologic abnormality, acute-phase response, and duration of symptoms in the involved joints. These criteria were consistent with those identified in the Phase 1 data-driven approach. Conclusion The consensus-based, decision analysis approach used in Phase 2 complemented the Phase 1 efforts. The 4 criteria and their relative weights form the basis of the final criteria set.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/78048/1/27580_ftp.pd

Towards improved cover glasses for photovoltaic devices

For the solar energy industry to increase its competitiveness there is a global drive to lower the cost of solar generated electricity. Photovoltaic (PV) module assembly is material-demanding and the cover glass constitutes a significant proportion of the cost. Currently, 3 mm thick glass is the predominant cover material for PV modules, accounting for 10-25% of the total cost. Here we review the state-of-the-art of cover glasses for PV modules and present our recent results for improvement of the glass. These improvements were demonstrated in terms of mechanical, chemical and optical properties by optimizing the glass composition, including addition of novel dopants, to produce cover glasses that can provide: (i) enhanced UV protection of polymeric PV module components, potentially increasing module service lifetimes; (ii) re-emission of a proportion of the absorbed UV photon energy as visible photons capable of being absorbed by the solar cells, thereby increasing PV module efficiencies; (iii) Successful laboratory-scale demonstration of proof-of-concept, with increases of 1-6% in Isc and 1-8% Ipm. Improvements in both chemical and crack resistance of the cover glass were also achieved through modest chemical reformulation, highlighting what may be achievable within existing manufacturing technology constraints

Prostanoid receptor EP1 and Cox-2 in injured human nerves and a rat model of nerve injury: a time-course study

BACKGROUND: Recent studies show that inflammatory processes may contribute to neuropathic pain. Cyclooxygenase-2 (Cox-2) is an inducible enzyme responsible for production of prostanoids, which may sensitise sensory neurones via the EP1 receptor. We have recently reported that while macrophages infiltrate injured nerves within days of injury, they express increased Cox-2-immunoreactivity (Cox-2-IR) from 2 to 3 weeks after injury. We have now investigated the time course of EP1 and Cox-2 changes in injured human nerves and dorsal root ganglia (DRG), and the chronic constriction nerve injury (CCI) model in the rat. METHODS: Tissue sections were immunostained with specific antibodies to EP1, Cox-2, CD68 (human macrophage marker) or OX42 (rat microglial marker), and neurofilaments (NF), prior to image analysis, from the following: human brachial plexus nerves (21 to 196 days post-injury), painful neuromas (9 days to 12 years post-injury), avulsion injured DRG, control nerves and DRG, and rat CCI model tissues. EP1 and NF-immunoreactive nerve fibres were quantified by image analysis. RESULTS: EP1:NF ratio was significantly increased in human brachial plexus nerve fibres, both proximal and distal to injury, in comparison with uninjured nerves. Sensory neurones in injured human DRG showed a significant acute increase of EP1-IR intensity. While there was a rapid increase in EP1-fibres and CD-68 positive macrophages, Cox-2 increase was apparent later, but was persistent in human painful neuromas for years. A similar time-course of changes was found in the rat CCI model with the above markers, both in the injured nerves and ipsilateral dorsal spinal cord. CONCLUSION: Different stages of infiltration and activation of macrophages may be observed in the peripheral and central nervous system following peripheral nerve injury. EP1 receptor level increase in sensory neurones, and macrophage infiltration, appears to precede increased Cox-2 expression by macrophages. However, other methods for detecting Cox-2 levels and activity are required. EP1 antagonists may show therapeutic effects in acute and chronic neuropathic pain, in addition to inflammatory pain

Novel mutations in XLRS1 causing retinoschisis, including first evidence of putative leader sequence change

Juvenile retinoschisis is an X-linked recessive disease caused by mutations in the XLRS1 gene. We screened 31 new unrelated patients and families for XLRS1 mutations in addition to previously reported mutations for 60 of our families (Retinoschisis Consortium, Hum Mol Genet 1998;7:1185–1192). Twenty-three different mutations including 12 novel ones were identified in 28 patients. Mutations identified in this study include 19 missense mutations, two nonsense mutations, one intragenic deletion, four microdeletions, one insertion, and one intronic sequence substitution that is likely to result in a splice site defect. Two novel mutations, c.38T→C (L13P) and c.667T→C (C223R), respectively, present the first genetic evidence for the functional significance of the putative leader peptide sequence and for the functional significance at the carboxyl terminal of the XLRS1 protein beyond the discoidin domain. Mutations in 25 of the families were localized to exons 4–6, emphasizing the critical functional significance of the discoidin domain of the XLRS1 protein. Hum Mutat 14:423–427, 1999. © 1999 Wiley-Liss, Inc.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/35178/1/8_ftp.pd

Thermal conductivity of refractory glass fibres

In the present study, the current international standards and corresponding apparatus for measuring the thermal conductivity of refractory glass fibre products have been reviewed. Refractory glass fibres are normally produced in the form of low-density needled mats. A major issue with thermal conductivity measurements of these materials is lack of reproducibility in the test results due to transformation of the test material during the test. Also needled mats are inherently inhomogeneous, and this poses additional problems. To be able to compare the various methods of thermal conductivity measurement, a refractory reference material was designed which is capable of withstanding maximum test temperatures (1673 K) with minimum transformation. The thermal conductivity of this reference material was then measured using various methods according to the different standards surveyed. In order to compare different materials, samples have been acquired from major refractory glass fibre manufacturers and the results have been compared against the newly introduced reference material. Materials manufactured by melt spinning, melt blowing and sol–gel have been studied, and results compared with literature values